Skip to main content

Trip from Annapolis, MD to Berwyn Heights, MD

Compiled and reviewed by the Trip.ovh planning team at COD Solutions Oy · Last reviewed Apr 17, 2026 · Editorial standards

Drive Time

38m

Distance

27 mi

43 km

Drive Score

6/10

Good drive

Same Day?

Yes, doable

Fuel Cost

$4

one way

EV Charging

Unknown

Best Time to Leave

Save up to 9 min
4 AM
0h 35m ★
6 AM
0h 38m
8 AM
0h 44m
10 AM
0h 40m
12 PM
0h 40m
3 PM
0h 41m
5 PM
0h 44m
8 PM
0h 36m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

city in and county seat of Anne Arundel County, Maryland, United States, and Maryland federated state capital city

Annapolis, MD

Wikimedia Commons

Downtown Berwyn Heights, MD, MD

Berwyn Heights, MD

RDNE Stock project

Trip Overview

The drive from Annapolis, MD to Berwyn Heights, MD covers 27 miles and takes about 38m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.

The route leans on John Hanson Highway, Capital Beltway, Roscoe Rowe Boulevard for much of the mileage, and the overall profile is turn-heavy local drive. The longest uninterrupted segment is about 18.4 miles on John Hanson Highway. At current regular gas prices, budget about $4.48 one way before food or hotel costs.

Who Is This Route For?

Weekend Trip

Doable as a same-day drive at 38m. Total distance: 27 miles.

Family Friendly

Moderate complexity with 0 natural rest stops along the way.

Solo Traveler

38m drive, comfortable solo distance.

EV Driver

0 DC fast chargers along the route. Coverage: unknown.

Scenic Drive

Turn-heavy local drive route profile.

Drive Character

Expect a 38m drive with frequent turns across 27 miles of local and secondary roads.

This route has more turning and local-road decision points than a simple highway run.
There are about 17 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
John Hanson Highway is the longest continuous segment at about 18.4 miles.

How Hard Is This Drive?

Expect a hands-on drive with frequent turns and local roads rather than long highway stretches. You will hit about 10 points where you need to pay attention to lane position or signs. The trickiest moment comes early in the drive near MD 450 / College Avenue.

Driving Effort 6/10

Moderate - straightforward overall, but long enough or busy enough to require pacing

Balances navigation complexity with total wheel time.

This drive requires moderate attention. Across 27 miles you will encounter 10 spots where lane choice or exit timing matters. Not difficult for experienced highway drivers, but worth previewing the tricky sections before you go.

Where does it get tricky?

The main spots that need attention: near the start (MD 450 / College Avenue): Roundabout - know your exit number before entering; at 20.6 miles: Exit ramp - move to the correct lane early. Multiple destination signs - pick the right one; at 21 miles: Highway fork - watch signs carefully. Lane positioning matters here. Multiple destination signs - pick the right one.

Critical Maneuvers

5 of 10 key points

These are the spots where you need to pay the most attention. Preview them before you drive.

6
0 mi into trip | ~0m in | MD 450 / College Avenue

Enter roundabout onto MD 450 / College Avenue

Roundabout - know your exit number before entering

6
20.6 mi into trip | ~26m in

Take the exit toward I 95 North, I 495 North: Baltimore, Silver Spring

Exit ramp - move to the correct lane early. Multiple destination signs - pick the right one

Exit 7B Toward I 95 North, I 495 North: Baltimore, Silv...
9
21 mi into trip | ~27m in

Keep slight left at fork toward I 495 North, I 95 North: Beltway

Highway fork - watch signs carefully. Lane positioning matters here. Multiple destination signs - pick the right one

Use the slight left lane. Exit 7B Toward I 495 North, I 95 North: Beltway
5
21.6 mi into trip | ~28m in | I 95; I 495 / Capital Beltway

Merge onto I 95; I 495 / Capital Beltway

Merge point - match speed before joining. Lane positioning matters here

Use the straight / slight right lanes.
8
25.1 mi into trip | ~33m in

Take the exit toward MD 201: Bladensburg, Greenbelt

Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one

Use the slight right lane. Exit 23 Toward MD 201: Bladensburg, Greenbelt

Towns Mentioned on Route Signs

Based on OSRM destination-sign hints, not a full list of every settlement the road passes.

Between Annapolis, MD and Berwyn Heights, MD, road signs point toward Silver Spring and Greenbelt.

Silver Spring

20.6 mi in | ~26m

Greenbelt

25.1 mi in | ~33m

Main Roads

Road Distance Duration
John Hanson Highway 18.4 mi 22m
Capital Beltway 3.5 mi 4m
Roscoe Rowe Boulevard 1.4 mi 2m
Kenilworth Avenue 0.4 mi <1m
Greenbelt Road 0.3 mi <1m
Bladen Street 0.3 mi <1m
62nd Avenue 0.3 mi <1m
Quebec Place <0.1 mi <1m
Longest stretch: John Hanson Highway — 18.4 mi, about 22m

Turn-by-Turn Driving Directions

Step-by-step road directions between Annapolis, MD and Berwyn Heights, MD.

1

Start on School Street

137 ft · 6 sec · School Street
2

Enter roundabout onto MD 450

77 ft · 1 sec · College Avenue
3

Continue on MD 450

343 ft · 7 sec · College Avenue
4

Turn left onto MD 70

0.3 mi · 40 sec · Bladen Street
5

Continue on MD 70

1.4 mi · 2 min · Roscoe Rowe Boulevard
6

Take the ramp

0.4 mi · 53 sec
7

Continue on US 50; US 301; MD 2

18 mi · 22 min · John Hanson Highway
Use the straight / slight right lanes.
8

Take the exit

0.4 mi · 57 sec
Exit 7B Toward I 95 North, I 495 North: Baltimore, Silver Spring
9

Keep slight left at fork

0.6 mi · 1 min
Exit 7B Toward I 495 North, I 95 North: Beltway Use the slight left lane.
10

Merge onto I 95; I 495

3.5 mi · 4 min · Capital Beltway
Use the straight / slight right lanes.
11

Take the exit

0.6 mi · 1 min
Exit 23 Toward MD 201: Bladensburg, Greenbelt Use the slight right lane.
12

Turn left onto MD 201

0.4 mi · 44 sec · Kenilworth Avenue
13

Turn slight right

0.2 mi · 43 sec
Toward MD 193: University of Maryland
14

Turn right onto MD 193

0.3 mi · 48 sec · Greenbelt Road
15

Turn left onto 62nd Avenue

0.3 mi · 52 sec · 62nd Avenue
16

Turn right onto Quebec Place

510 ft · 17 sec · Quebec Place
17

Arrive at destination

Quebec Place

Fuel & Cost

Regular Gas

$4.48 one way

$8.95 round trip

$4.21/gal 25.4 MPG avg 9 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.61 $4.90 $9.81
premium $4.93 $5.24 $10.47
diesel $5.61 $5.96 $11.92

No toll roads detected on this route.

Drive Cost (one way)

Fuel

$4

Estimated CO2 emission: 9.4 kg one way. Prices: EIA weekly data, 2026-04-13.

Driving Electric?

About $3 in charging · 0 stops · 67% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 8.1 0 $2.83 $1.30
Efficient EV 6.8 0 $2.36 $1.08
EV Truck/SUV 10.8 0 $3.78 $1.73

Gas CO2

9 kg

EV CO2

3 kg (67% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast as of Apr 17, 2026

Origin

Annapolis, MD

Morning in Annapolis on Friday

Local time

9:45 AM

EDT

Current temp

74°F

Unavailable

Live forecast

Destination

Berwyn Heights, MD

Morning in Berwyn Heights on Friday

Local time

9:45 AM

EDT

Current temp

75°F

Unavailable

Live forecast

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

1 degrees warmer at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

38m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Annapolis, MD to Berwyn Heights, MD covers 27 miles and takes about 38m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.

The main roads are John Hanson Highway, Capital Beltway, Roscoe Rowe Boulevard. Expect a mix of highway and local road driving.

This is a comfortable same-day trip.

The midpoint is about 13.5 miles from Annapolis, MD. Look for rest areas, gas stations, or food options near the halfway mark.

At current regular gas prices, expect to spend about $4.48 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.

Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.

This drive requires moderate attention. Across 27 miles you will encounter 10 spots where lane choice or exit timing matters. Not difficult for experienced highway drivers, but worth previewing the tricky sections before you go.

The main spots that need attention: near the start (MD 450 / College Avenue): Roundabout - know your exit number before entering; at 20.6 miles: Exit ramp - move to the correct lane early. Multiple destination signs - pick the right one; at 21 miles: Highway fork - watch signs carefully. Lane positioning matters here. Multiple destination signs - pick the right one.

Between Annapolis, MD and Berwyn Heights, MD, road signs point toward Silver Spring and Greenbelt.

How this page is built

Compiled by the Trip.ovh planning team at COD Solutions Oy from open government datasets — OSRM over OpenStreetMap for geometry, and EIA for fuel prices. See our methodology for refresh cadence and limitations.

Was this helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Explore more options from Annapolis, MD or browse trips ending in Berwyn Heights, MD.

Looking for more statewide routes? Browse MD road trips.