Trip from Arlington Heights, IL to Park City, IL

Drive Time

38m

Distance

27.4 mi

44 km

Drive Score

6/10

Good drive

Same Day?

Yes, doable

Fuel Cost

$4

one way

EV Charging

Excellent

25 DC fast

Best Time to Leave

Save up to 10 min
4 AM
0h 35m ★
6 AM
0h 38m
8 AM
0h 45m
10 AM
0h 41m
12 PM
0h 40m
3 PM
0h 41m
5 PM
0h 44m
8 PM
0h 36m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

Downtown Arlington Heights, IL, IL

Arlington Heights, IL

Dominik Gryzbon

Downtown Park City, IL, IL

Park City, IL

Willian Justen de Vasconcellos

Trip Overview

The drive from Arlington Heights, IL to Park City, IL covers 27.4 miles and takes about 38m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.

The route leans on Tri-State Tollway, Palatine Road, Belvidere Road for much of the mileage, and the overall profile is turn-heavy local drive. The longest uninterrupted segment is about 17.3 miles on Tri-State Tollway. At current regular gas prices, budget about $4.16 one way before food or hotel costs.

Trip Pace

Same-day drive is realistic

A same-day return is realistic if you keep stops short.

Break Rhythm

0 planned breaks

A short stop every 2 to 3 hours is enough for this drive.

Midpoint

13.7 miles from Arlington Heights, IL

A natural place for your longest stop of the day , about 20m into the drive .

Drive Character

Expect a 38m drive with frequent turns across 27.4 miles of local and secondary roads.

This route has more turning and local-road decision points than a simple highway run.
There are about 12 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
Tri-State Tollway is the longest continuous segment at about 17.3 miles.

How Hard Is This Drive?

Expect a hands-on drive with frequent turns and local roads rather than long highway stretches. You will hit about 8 points where you need to pay attention to lane position or signs. The trickiest moment comes early in the drive near North Arlington Heights Road.

Route Complexity 6/10

Moderate - straightforward overall, but long enough or busy enough to require pacing

This drive requires moderate attention. Across 27.4 miles you will encounter 8 spots where lane choice or exit timing matters. Not difficult for experienced highway drivers, but worth previewing the tricky sections before you go.

Where does it get tricky?

The main spots that need attention: near the start (North Arlington Heights Road): Navigation decision point; at 7.4 miles: Sharp turn - reduce speed on approach. Lane positioning matters here; at 7.4 miles: Highway fork - watch signs carefully.

Critical Maneuvers

5 of 8 key points

These are the spots where you need to pay the most attention. Preview them before you drive.

4
0 mi into trip | ~0m in | North Arlington Heights Road

Turn left onto North Arlington Heights Road

Navigation decision point

8
7.4 mi into trip | ~13m in

Turn sharp left toward I 294 Toll North: Wisconsin

Sharp turn - reduce speed on approach. Lane positioning matters here

Use the left lane. Toward I 294 Toll North: Wisconsin
5
7.4 mi into trip | ~13m in

Keep slight right at fork toward I 294 North: Wisconsin

Highway fork - watch signs carefully

Toward I 294 North: Wisconsin
5
7.8 mi into trip | ~14m in | I 294 / Tri-State Tollway

Merge onto I 294 / Tri-State Tollway

Merge point - match speed before joining. Lane positioning matters here

Use the straight / slight right lanes.
7
25.1 mi into trip | ~34m in

Take the exit toward IL 120 East: Belvidere Road

Exit ramp - move to the correct lane early. Lane positioning matters here

Use the straight / slight right lanes. Exit 11A Toward IL 120 East: Belvidere Road

Main Roads

Road Distance Duration
Tri-State Tollway 17.3 mi 20m
Palatine Road 5.1 mi 7m
Belvidere Road 1.9 mi 2m
North Arlington Heights Road 1.5 mi 3m
Willow Road 0.8 mi 1m
Frontage Road <0.1 mi <1m
Knight Avenue <0.1 mi <1m
East Euclid Avenue <0.1 mi <1m
Longest stretch: Tri-State Tollway — 17.3 mi, about 20m

Turn-by-Turn Driving Directions

Step-by-step road directions between Arlington Heights, IL and Park City, IL.

1

Start on East Euclid Avenue

48 ft · 9 sec · East Euclid Avenue
2

Turn left onto North Arlington Heights Road

1.5 mi · 3 min · North Arlington Heights Road
3

Turn right onto Palatine Road

5.1 mi · 7 min · Palatine Road
Use the right lane.
4

Continue on Willow Road

0.8 mi · 1 min · Willow Road
Use the straight lane.
5

Turn sharp left

383 ft · 11 sec
Toward I 294 Toll North: Wisconsin Use the left lane.
6

Keep slight right at fork

0.4 mi · 50 sec
Toward I 294 North: Wisconsin
7

Merge onto I 294

17 mi · 20 min · Tri-State Tollway
Use the straight / slight right lanes.
8

Take the exit

0.4 mi · 47 sec
Exit 11A Toward IL 120 East: Belvidere Road Use the straight / slight right lanes.
9

Turn straight onto IL 120

1.9 mi · 2 min · Belvidere Road
10

Turn right onto Knight Avenue

99 ft · 5 sec · Knight Avenue
11

Turn right onto Frontage Road

423 ft · 18 sec · Frontage Road
12

Arrive at destination

Frontage Road

Trip Plan

Morning Departure

Leave by 9 AM and you'll arrive before lunch.

Evening Departure

Even a 4 PM departure gets you there before dark in summer.

You can normally do this drive in one day.
You may only need one short stretch break if traffic stays light.
The halfway point lands around 13.7 miles from Arlington Heights, IL, or about 20m into the drive.
The longest continuous stretch on this route runs about 17.3 miles.

This is a comfortable same-day trip.

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 27.4 miles or 38m in

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 13.7 miles or 20m in

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Final hour starts around 32m

Traffic, exits, and arrival timing usually matter more near Park City, IL than in the middle of the route.

Before You Leave

+

Open the route before leaving Arlington Heights, IL so your first major turns are already loaded.

+

Leave with enough water and a charging cable within reach, not packed away.

+

Check your fuel range against the first long segment, especially if you are starting outside city service areas.

Day 1

Settle into the route from Arlington Heights, IL

This is one driving day of about 27.4 miles and 38m.

Your first comfortable stop window is around 80 miles from Arlington Heights, IL.
This route can stay practical as a one-day drive if traffic stays reasonable.
You may only need one short stretch stop if conditions stay smooth.
The longest stretch is on Tri-State Tollway for about 17.3 miles.

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 13.7 mi from Arlington Heights, IL · 20m into the drive

Downtown Des Plaines, IL, IL

Mid-route town

Meal stop

Des Plaines, IL

14 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Pacing Suggestions

Waukegan, IL

Fuel and coffee

A short stop after about 27.4 miles helps settle the day before fatigue starts building.

Des Plaines, IL

Meal break

The midpoint is around 13.7 miles from Arlington Heights, IL, which is a good place for a longer meal and fuel stop.

Arriving in Park City, IL

The final approach into Park City, IL usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Park City, IL.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Regular Gas

$4.16 one way

$8.32 round trip

$3.86/gal 25.4 MPG avg 10 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.25 $4.59 $9.18
premium $4.80 $5.17 $10.35
diesel $5.64 $6.09 $12.17

Estimated Tolls: $1.04

Tri-state Tollway (17.3 mi) $1.04

Toll estimates based on average 2024-2025 rates. EZ-Pass/SunPass discounts may lower the actual cost.

Estimated Trip Cost (one way, 1 person)

Fuel

$4

Tolls

$1

Meals

$25–$50

Total

$30–$55

Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.

Estimated CO2 emission: 9.6 kg one way. Prices: EIA weekly data, 2026-04-06.

EV Charging Along Route

25 DC fast chargers · Coverage: excellent

Meijer - Tesla Supercharger

Rolling Meadows, IL

Tesla

22 DCFC

Abt Electronics - Tesla Supercharger

Glenview, IL

Tesla

10 DCFC

RPT Realty Deer Grove Centre (Palatine, IL)

Palatine, IL

Electrify America

8 DCFC

Willow Festival - Tesla Supercharger

Northbrook, IL

Tesla

8 DCFC

Meacham DCFC’s -HCS

Schaumburg, IL

Blink Network

6 DCFC

Golf Mill Ford

Niles, IL

EVXY

6 DCFC

Colony Square

Mt Prospect, IL

eVgo Network

4 DCFC

Kohl's - Tesla Supercharger (BA Solutions)

Mt Prospect, IL

Tesla

4 DCFC

ChargePoint Network: 4 Tesla: 4 Electrify America: 3 Non-Networked: 3 Blink Network: 3 eVgo Network: 3 EVXY: 2 POWERPUMP: 1 EV Connect: 1 NOODOE: 1

Station data from NREL Alternative Fuel Stations database.

Driving Electric?

About $3 in charging · 0 stops · 70% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 8.2 0 $2.88 $1.32
Efficient EV 6.9 0 $2.40 $1.10
EV Truck/SUV 11 0 $3.84 $1.75

Gas CO2

10 kg

EV CO2

3 kg (70% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast data refreshed 3 days ago

Origin

Arlington Heights, IL

Afternoon in Arlington Heights on Monday

Local time

12:30 PM

CDT

Current temp

45°F

Unavailable

Live forecast

Destination

Park City, IL

Afternoon in Park City on Monday

Local time

12:30 PM

CDT

Current temp

72°F

Unavailable

Live forecast

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.

Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.

Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

27 degrees warmer at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

38m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Arlington Heights, IL to Park City, IL covers 27.4 miles and takes about 38m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are Tri-State Tollway, Palatine Road, Belvidere Road. Expect a mix of highway and local road driving.
This is a comfortable same-day trip.
The midpoint is about 13.7 miles from Arlington Heights, IL. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $4.16 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
This drive requires moderate attention. Across 27.4 miles you will encounter 8 spots where lane choice or exit timing matters. Not difficult for experienced highway drivers, but worth previewing the tricky sections before you go.
The main spots that need attention: near the start (North Arlington Heights Road): Navigation decision point; at 7.4 miles: Sharp turn - reduce speed on approach. Lane positioning matters here; at 7.4 miles: Highway fork - watch signs carefully.
The route from Arlington Heights, IL to Park City, IL does not surface many named destination signs beyond the main corridor.

Was this route helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Explore more options from Arlington Heights, IL or browse trips ending in Park City, IL.

Looking for more statewide routes? Browse IL road trips.

Explore maps for Arlington Heights, IL or Park City, IL on MapSof.net.