Origin
Baltimore, MD
Night in Baltimore on Wednesday
Local time
10:28 PM
EDT
Current temp
51°F
Unavailable
Live forecast
Trip from Baltimore, MD to Hagerstown, MD
Last recalculated Apr 15, 2026
Drive Time
1h 30m
Distance
74.5 mi
120 km
Drive Score
7/10
Good drive
Same Day?
Yes, doable
Fuel Cost
$12
one way
Best Time to Leave
4 AM
1h 23m
★
6 AM
1h 30m
8 AM
1h 44m
10 AM
1h 35m
12 PM
1h 34m
3 PM
1h 36m
5 PM
1h 43m
8 PM
1h 26m
Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.
Hagerstown, MD
Wikimedia Commons
Trip Overview
This straightforward 74.5-mile drive from Baltimore, MD, to Hagerstown, MD, is easily manageable in about 1 hour and 30 minutes, making it an ideal day trip. The route primarily utilizes I-70 and the Baltimore Beltway, with a short section on Dual Highway. With an estimated fuel cost of $12, this drive focuses on efficient travel. Since both locations are within the Northeast region and the drive is relatively short, you won't need to worry about overnight stays. It's a practical option for getting between these two Maryland cities without a significant time commitment.
Trip Pace
Same-day drive is realistic
A same-day return is realistic if you keep stops short.
Break Rhythm
0 planned breaks
A short stop every 2 to 3 hours is enough for this drive.
Midpoint
37.3 miles from Baltimore, MD
A natural place for your longest stop of the day , about 46m into the drive .
Drive Character
Expect a predominantly highway-focused experience, with 83% of the drive on high-speed roads like I-70 and the Baltimore Beltway. The longest uninterrupted stretch you'll encounter is 59.1 miles on I-70. This means you'll be dealing with consistent speeds and typical interstate conditions for the majority of your journey. While not a winding scenic route, it offers a direct and efficient path, allowing you to cover ground quickly.
Most of the miles stay on highways, which makes pacing and fuel planning easier than turn-by-turn city driving.
There are about 20 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
I 70 is the longest continuous segment at about 59.1 miles.
How Hard Is This Drive?
This is a straightforward highway drive that stays mostly on I 70 and Baltimore Beltway. This route has several spots where lane changes, forks, or exits need your full attention. The trickiest moment comes around 0.1 miles in near MD 2 / Saint Paul Street.
Route Complexity
9/10
Demanding - stay alert through the decision-heavy sections
This drive requires moderate attention. Across 74.5 miles you will encounter 13 spots where lane choice or exit timing matters. Not difficult for experienced highway drivers, but worth previewing the tricky sections before you go.
Where does it get tricky?
The main spots that need attention: at 0.1 miles (MD 2 / Saint Paul Street): Lane positioning matters here; at 5.2 miles: Exit ramp - move to the correct lane early. Lane positioning matters here; at 10.4 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one.
Critical Maneuvers
5 of 13 key pointsThese are the spots where you need to pay the most attention. Preview them before you drive.
7
0.1 mi into trip
|
~0m in
|
MD 2 / Saint Paul Street
Turn left onto MD 2 / Saint Paul Street
Lane positioning matters here
Use the left / straight lanes.
7
5.2 mi into trip
|
~9m in
Take the exit toward I 695 West: Towson
Exit ramp - move to the correct lane early. Lane positioning matters here
Use the straight / slight right lanes.
Exit 49B
Toward I 695 West: Towson
8
10.4 mi into trip
|
~16m in
Take the exit toward I 70: Frederick, Local Traffic
Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one
Use the slight right lane.
Exit 16A-B
Toward I 70: Frederick, Local Traffic
8
10.6 mi into trip
|
~17m in
Keep slight left at fork toward I 70 West: Frederick
Highway fork - watch signs carefully. Lane positioning matters here
Use the slight left lane.
Exit 16A
Toward I 70 West: Frederick
7
70.5 mi into trip
|
~1h 22m in
Take the exit toward US 40 West: Hagerstown
Exit ramp - move to the correct lane early. Lane positioning matters here
Use the straight / slight right lanes.
Exit 32B
Toward US 40 West: Hagerstown
Towns Mentioned on Route Signs
Based on OSRM destination-sign hints, not a full list of every settlement the road passes.
On the drive from Baltimore, MD to Hagerstown, MD, road signs begin pointing toward Local Traffic along the way.
Local Traffic
10.4 mi in
|
~16m
Main Roads
| Road | Distance | Duration |
|---|---|---|
| I 70 | 59.1 mi | 1h 3m |
| Baltimore Beltway | 4.6 mi | 6m |
| Dual Highway | 3.1 mi | 5m |
| I 95 | 2.9 mi | 3m |
| Cal Ripken Way | 0.7 mi | 1m |
| Light Street | 0.4 mi | 1m |
| East Franklin Street | 0.3 mi | <1m |
| East Conway Street | 0.3 mi | <1m |
Longest stretch:
I 70
— 59.1 mi, about 1h 3m
Turn-by-Turn Driving Directions
Step-by-step road directions between Baltimore, MD and Hagerstown, MD.
1
Start on East Fayette Street
487 ft
·
23 sec
·
East Fayette Street
2
Turn left onto MD 2
312 ft
·
10 sec
·
Saint Paul Street
Use the left / straight lanes.
3
Continue on MD 2
0.4 mi
·
1 min
·
Light Street
Use the straight / left lanes.
4
Turn right onto East Conway Street
0.3 mi
·
52 sec
·
East Conway Street
Use the right lane.
5
Turn left onto I 395
0.7 mi
·
1 min
·
Cal Ripken Way
Use the left / straight / right lanes.
6
Keep slight left at fork
0.7 mi
·
1 min
Toward I 95 South: Washington
7
Merge onto I 95
2.9 mi
·
3 min
·
I 95
8
Take the exit
0.6 mi
·
1 min
Exit 49B
Toward I 695 West: Towson
Use the straight / slight right lanes.
9
Merge onto I 695
4.6 mi
·
6 min
·
Baltimore Beltway
Use the straight / slight right lanes.
10
Take the exit
0.2 mi
·
23 sec
Exit 16A-B
Toward I 70: Frederick, Local Traffic
Use the slight right lane.
11
Keep slight left at fork
0.8 mi
·
1 min
Exit 16A
Toward I 70 West: Frederick
Use the slight left lane.
12
Merge onto I 70
14 mi
·
15 min
·
I 70
Use the straight / slight right lanes.
13
Continue on I 70; US 40
12 mi
·
12 min
·
I 70; US 40
Use the straight / slight right lanes.
14
Continue on I 70; US 40
33 mi
·
35 min
·
I 70; US 40
Use the straight / slight right lanes.
15
Take the exit
0.5 mi
·
1 min
Exit 32B
Toward US 40 West: Hagerstown
Use the straight / slight right lanes.
16
Turn straight onto US 40
3.1 mi
·
5 min
·
Dual Highway
17
Continue on US 40
0.3 mi
·
40 sec
·
East Franklin Street
18
Turn left onto North Potomac Street
0.1 mi
·
18 sec
·
North Potomac Street
19
Turn left onto US 40
118 ft
·
4 sec
·
East Washington Street
Use the left lane.
20
Arrive at destination
US 40
Trip Plan
Given the short duration of this 1 hour and 30-minute trip, you have the flexibility to leave whenever suits your schedule. Consider departing early in the morning to avoid potential Baltimore-area traffic, especially if you're starting on a weekday. With only 74.5 miles to cover, extensive rest stops aren't necessary, but you'll find plenty of opportunities for fuel and quick breaks along I-70. A specific tip for this route: be aware that you'll be on the Baltimore Beltway for a portion, which can experience heavy traffic depending on the time of day.
Morning Departure
Leave by 9 AM and you'll arrive before lunch.
Evening Departure
Even a 4 PM departure gets you there before dark in summer.
You can normally do this drive in one day.
You may only need one short stretch break if traffic stays light.
The halfway point lands around 37.3 miles from Baltimore, MD, or about 46m into the drive.
The longest continuous stretch on this route runs about 59.1 miles.
This is a comfortable same-day trip.
Departure
Before you leave
Start with fuel, water, and navigation already sorted so the first hour feels easy.
First stop
Around 16 miles or 23m in
Use this first pause for coffee, a restroom break, and a quick traffic check ahead.
Halfway reset
Around 37.3 miles or 46m in
This is the best place for your longest stop, a real meal, and a full fuel check.
Final approach
Final hour starts around 1h 14m
Traffic, exits, and arrival timing usually matter more near Hagerstown, MD than in the middle of the route.
Before You Leave
+
Open the route before leaving Baltimore, MD so your first major turns are already loaded.
Day 1
Settle into the route from Baltimore, MD
This is one driving day of about 74.5 miles and 1h 30m.
Your first comfortable stop window is around 16 miles from Baltimore, MD.
This route can stay practical as a one-day drive if traffic stays reasonable.
The longest stretch is on I 70 for about 59.1 miles.
Where to Stop
Rest stops, refuel points, and overnight suggestions along this route.
Halfway Point
Midpoint
About 37.3 mi from Baltimore, MD · 46m into the drive
Mid-route town
Meal stop
37 mi into the route
Best for: Lunch, fuel, and a longer reset
This sits close to the middle of the route, so it works well for the longest stop of the day.
Pacing Suggestions
Fuel and coffee
A short stop after about 16 miles helps settle the day before fatigue starts building.
Meal break
The midpoint is around 37.3 miles from Baltimore, MD, which is a good place for a longer meal and fuel stop.
Arriving in Hagerstown, MD
The final approach into Hagerstown, MD usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.
These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.
Fuel & Cost
Regular Gas
$12.35 one way
$24.70 round trip
$4.21/gal
25.4 MPG avg
26 kg CO2
| Fuel Type | $/gal | One Way | Round Trip |
|---|---|---|---|
| midgrade | $4.61 | $13.53 | $27.05 |
| premium | $4.93 | $14.45 | $28.90 |
| diesel | $5.61 | $16.45 | $32.90 |
No toll roads detected on this route.
Estimated Trip Cost (one way, 1 person)
Fuel
$12
Meals
$25–$50
Total
$37–$62
Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.
Estimated CO2 emission: 26.1 kg one way. Prices: EIA weekly data, 2026-04-13.
Driving Electric?
About $8 in charging · 0 stops · 65% less CO2
| Vehicle Type | kWh | Stops | DC Fast | Home Charge |
|---|---|---|---|---|
| Average EV | 22.3 | 0 | $7.82 | $3.58 |
| Efficient EV | 18.6 | 0 | $6.52 | $2.98 |
| EV Truck/SUV | 29.8 | 0 | $10.43 | $4.77 |
Gas CO2
26 kg
EV CO2
9 kg (65% less)
This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.
DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.
Travel Intel
Current conditions at both ends of the drive.
Destination
Hagerstown, MD
Night in Hagerstown on Wednesday
Local time
10:28 PM
EDT
Current temp
67°F
Unavailable
Live forecast
48°F
Mount Airy, MD
37 mi in
Seasonal Notes
Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.
Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.
Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.
Time zone
Same local time
Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.
Temperature spread
16 degrees warmer at arrival
A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.
Road read
1h 30m on the road
Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.
Weather data from the National Weather Service. Conditions may change; check closer to your travel date.
Frequently Asked Questions
The drive from Baltimore, MD to Hagerstown, MD covers 74.5 miles and takes about 1h 30m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are I 70, Baltimore Beltway, Dual Highway. Most of the drive stays on highways, so watch for ramps and exits.
This is a comfortable same-day trip.
The midpoint is about 37.3 miles from Baltimore, MD. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $12.35 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
This drive requires moderate attention. Across 74.5 miles you will encounter 13 spots where lane choice or exit timing matters. Not difficult for experienced highway drivers, but worth previewing the tricky sections before you go.
The main spots that need attention: at 0.1 miles (MD 2 / Saint Paul Street): Lane positioning matters here; at 5.2 miles: Exit ramp - move to the correct lane early. Lane positioning matters here; at 10.4 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one.
On the drive from Baltimore, MD to Hagerstown, MD, road signs begin pointing toward Local Traffic along the way.
Was this route helpful?
Thanks for your feedback!
Your tip has been submitted. Thanks!
/500
Recent Tips
·
Explore More
Continue From Hagerstown, MD
More trips to Hagerstown, MD
Explore more options from Baltimore, MD or browse trips ending in Hagerstown, MD.
Looking for more statewide routes? Browse MD road trips.
Explore maps for Baltimore, MD or Hagerstown, MD on MapSof.net.