Skip to main content

Trip from Baltimore, MD to Adelphi, MD

Compiled and reviewed by the Trip.ovh planning team at COD Solutions Oy · Last reviewed Apr 17, 2026 · Editorial standards

Drive Time

40m

Distance

30 mi

48 km

Drive Score

7/10

Good drive

Same Day?

Yes, doable

Fuel Cost

$5

one way

EV Charging

Unknown

Best Time to Leave

Save up to 11 min
4 AM
0h 37m ★
6 AM
0h 41m
8 AM
0h 48m
10 AM
0h 43m
12 PM
0h 42m
3 PM
0h 43m
5 PM
0h 47m
8 PM
0h 39m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

Downtown Adelphi, MD, MD

Adelphi, MD

Wikimedia Commons

Trip Overview

Traveling the 30 miles from Baltimore to Adelphi is a straightforward local commute that typically takes about 40 minutes. Because this is a short, turn-heavy drive through Maryland, you can easily complete the trip in a single day without needing an overnight stay. Expect to spend approximately $5 on fuel for this excursion, making it a budget-friendly option for your schedule. You will navigate primarily through local streets like Saint Paul Street, Light Street, and East Conway Street rather than relying on major interstates. Since both cities are located within the Northeast region, you will stay within a familiar geographic corridor throughout your journey. This route is best suited for those who prefer navigating urban and suburban street grids over long-distance highway travel.

Who Is This Route For?

Weekend Trip

Doable as a same-day drive at 40m. Total distance: 30 miles.

Family Friendly

Moderate complexity with 0 natural rest stops along the way.

Solo Traveler

40m drive, comfortable solo distance.

EV Driver

0 DC fast chargers along the route. Coverage: unknown.

First-Time Driver

Mostly highway driving (76%). Some complex stretches to watch for.

Drive Character

Expect a very different experience than a typical highway trek, as this route consists entirely of local roads with 0% highway driving. You should prepare for a turn-heavy drive that requires your full attention as you transition between Saint Paul Street, Light Street, and East Conway Street. Because there are no long, uninterrupted stretches of road, the drive maintains a consistent, stop-and-go pace typical of urban navigation. You won’t find any sections of high-speed cruising here, so settle into a rhythm suited for city driving. The personality of this trip is purely functional, prioritizing direct local connections over scenic open-road motoring.

Most of the miles stay on highways, which makes pacing and fuel planning easier than turn-by-turn city driving.
There are about 11 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
I 95 is the longest continuous segment at about 22.9 miles.

How Hard Is This Drive?

This is a straightforward highway drive that stays mostly on I 95 and Powder Mill Road. You will hit about 6 points where you need to pay attention to lane position or signs. The trickiest moment comes around 0.1 miles in near MD 2 / Saint Paul Street.

Driving Effort 6/10

Moderate - straightforward overall, but long enough or busy enough to require pacing

Balances navigation complexity with total wheel time.

This drive requires moderate attention. Across 30 miles you will encounter 6 spots where lane choice or exit timing matters. Not difficult for experienced highway drivers, but worth previewing the tricky sections before you go.

Where does it get tricky?

The main spots that need attention: at 0.1 miles (MD 2 / Saint Paul Street): Lane positioning matters here; at 0.5 miles (East Conway Street): Lane positioning matters here; at 1.5 miles: Highway fork - watch signs carefully.

Critical Maneuvers

5 of 6 key points

These are the spots where you need to pay the most attention. Preview them before you drive.

7
0.1 mi into trip | ~0m in | MD 2 / Saint Paul Street

Turn left onto MD 2 / Saint Paul Street

Lane positioning matters here

Use the left / straight lanes.
6
0.5 mi into trip | ~1m in | East Conway Street

Turn right onto East Conway Street

Lane positioning matters here

Use the right lane.
5
1.5 mi into trip | ~4m in

Keep slight left at fork toward I 95 South: Washington

Highway fork - watch signs carefully

Toward I 95 South: Washington
5
2.3 mi into trip | ~5m in | I 95

Merge onto I 95

Merge point - match speed before joining. Lane positioning matters here

Use the straight / slight right lanes.
7
25.2 mi into trip | ~32m in

Take the exit toward MD 212 West: Calverton

Exit ramp - move to the correct lane early. Lane positioning matters here

Use the slight right lane. Exit 29B Toward MD 212 West: Calverton

Main Roads

Road Distance Duration
I 95 22.9 mi 27m
Powder Mill Road 2.4 mi 4m
Riggs Road 1.8 mi 3m
Cal Ripken Way 0.7 mi 1m
Light Street 0.4 mi 1m
East Conway Street 0.3 mi <1m
East Fayette Street <0.1 mi <1m
Saint Paul Street <0.1 mi <1m
Longest stretch: I 95 — 22.9 mi, about 27m

Turn-by-Turn Driving Directions

Step-by-step road directions between Baltimore, MD and Adelphi, MD.

1

Start on East Fayette Street

487 ft · 23 sec · East Fayette Street
2

Turn left onto MD 2

312 ft · 10 sec · Saint Paul Street
Use the left / straight lanes.
3

Continue on MD 2

0.4 mi · 1 min · Light Street
Use the straight / left lanes.
4

Turn right onto East Conway Street

0.3 mi · 52 sec · East Conway Street
Use the right lane.
5

Turn left onto I 395

0.7 mi · 1 min · Cal Ripken Way
Use the left / straight / right lanes.
6

Keep slight left at fork

0.7 mi · 1 min
Toward I 95 South: Washington
7

Merge onto I 95

23 mi · 27 min · I 95
Use the straight / slight right lanes.
8

Take the exit

0.6 mi · 42 sec
Exit 29B Toward MD 212 West: Calverton Use the slight right lane.
9

Turn straight onto MD 212

2.4 mi · 4 min · Powder Mill Road
10

Turn straight onto MD 212

1.8 mi · 3 min · Riggs Road
11

Arrive at destination

MD 212

Fuel & Cost

Regular Gas

$4.97 one way

$9.95 round trip

$4.21/gal 25.4 MPG avg 11 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.61 $5.45 $10.89
premium $4.93 $5.82 $11.64
diesel $5.61 $6.62 $13.25

No toll roads detected on this route.

Drive Cost (one way)

Fuel

$5

Estimated CO2 emission: 10.5 kg one way. Prices: EIA weekly data, 2026-04-13.

Driving Electric?

About $3 in charging · 0 stops · 60% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 9 0 $3.15 $1.44
Efficient EV 7.5 0 $2.63 $1.20
EV Truck/SUV 12 0 $4.20 $1.92

Gas CO2

10 kg

EV CO2

4 kg (60% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast as of Apr 17, 2026

Origin

Baltimore, MD

Late night in Baltimore on Friday

Local time

5:19 AM

EDT

Current temp

75°F

Unavailable

Live forecast

Destination

Adelphi, MD

Late night in Adelphi on Friday

Local time

5:19 AM

EDT

Current temp

74°F

Unavailable

Live forecast

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

1 degrees cooler at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

40m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Baltimore, MD to Adelphi, MD covers 30 miles and takes about 40m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.

The main roads are I 95, Powder Mill Road, Riggs Road. Most of the drive stays on highways, so watch for ramps and exits.

This is a comfortable same-day trip.

The midpoint is about 15 miles from Baltimore, MD. Look for rest areas, gas stations, or food options near the halfway mark.

At current regular gas prices, expect to spend about $4.97 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.

Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.

This drive requires moderate attention. Across 30 miles you will encounter 6 spots where lane choice or exit timing matters. Not difficult for experienced highway drivers, but worth previewing the tricky sections before you go.

The main spots that need attention: at 0.1 miles (MD 2 / Saint Paul Street): Lane positioning matters here; at 0.5 miles (East Conway Street): Lane positioning matters here; at 1.5 miles: Highway fork - watch signs carefully.

The route from Baltimore, MD to Adelphi, MD does not surface many named destination signs beyond the main corridor.

Yes. Nearby national parks include Chesapeake & Ohio Canal National Historical Park.

How this page is built

Compiled and maintained by the Trip.ovh planning team at COD Solutions Oy (Helsinki). Each route is built from authoritative open government and mapping datasets rather than crowdsourced reviews. Distances and geometry come from OSRM over OpenStreetMap. Fuel cost uses EIA weekly regional averages. National park proximity is from the NPS API. Pages are published only after passing our data-quality checks; our methodology page documents refresh cadence, editorial standards, and known limitations.

Was this helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Explore more options from Baltimore, MD or browse trips ending in Adelphi, MD.

Looking for more statewide routes? Browse MD road trips.