Trip from Beaver, OH to Youngstown, OH

Drive Time

4h 9m

Distance

249.1 mi

Route Type

Turn-heavy local drive

Long day trip

Trip Overview

The drive from Beaver, OH to Youngstown, OH covers 249.1 miles and takes about 4h 9m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.

The route leans on Main Street, James A, Schuster Road for much of the mileage, and the overall profile is turn-heavy local drive. At current regular gas prices, budget about $36.34 one way before food or hotel costs.

Trip Pace

Same-day drive is realistic

A same-day return is possible, but it will make for a full day on the road.

Break Rhythm

1 planned break

Plan on a short reset every 3 to 4 hours to stay fresh behind the wheel.

Midpoint

124.6 miles from Beaver, OH

A natural place for your longest stop of the day.

Drive Character

Expect a 4h 9m drive with frequent turns across 249.1 miles of local and secondary roads.

This route has more turning and local-road decision points than a simple highway run.

There are about 32 navigation steps in the underlying route data, so the final approach matters more than the middle miles.

Main Street is one of the defining roads on this drive.

Main Roads

Road	Distance	Duration
Main Street	0 mi	0m
James A	0 mi	0m
Schuster Road	0 mi	0m
West 3rd Street	0 mi	0m
South Market Street	0 mi	0m
East Emmitt Avenue	0 mi	0m
US 23 North	0 mi	0m
South High Street	0 mi	0m

Longest stretch: Main Street — 0 mi, about 0m

Step-by-Step Directions

1

Start on the route

2

Turn right onto Main Street

3

Turn left

4

Turn right onto James A. Rhodes Appalachian Highway

5

Turn right onto Schuster Road

6

At the end of the road, turn right onto West 3rd Street

7

Turn left onto South Market Street

8

Turn right onto East Emmitt Avenue

9

Keep slight right to continue on US 23 North: Columbus

10

Continue on South High Street

11

Take the exit slight right toward I 270: Columbus, Wheeling

12

Keep slight left to continue on I 270 West

13

Merge slight left onto Jack Nicklaus Freeway

14

Take the exit slight right toward I 71: Cincinnati, Columbus

15

Keep slight right to continue on I 71 North: Columbus

16

Merge slight left onto South Freeway

17

Take the exit slight right toward I 71 North, I 70 East: Cleveland, Wheeling

18

Merge slight left onto South Innerbelt

19

Keep slight right to continue on I 71 North: Cleveland

20

Keep slight left

21

Take the exit slight right toward I 76, US 224: Lodi, Akron

22

Keep slight right to continue on I 76, US 224 East: Akron

23

Merge slight left

24

Keep slight right to continue on Kenmore Expressway

25

Keep slight right to continue on I 76 East: Akron

26

Keep slight left

27

Continue straight

28

Keep slight right to continue on I 680: Youngstown

29

Take the exit slight right

30

Turn sharp left onto Market Street

31

Keep slight right to continue on Central Square

32

Arrive at your destination

When to Leave

Morning Departure

An early start around 7-8 AM gets you there with plenty of daylight left.

Evening Departure

A late afternoon start means arriving after dark. Morning is better.

You can normally do this drive in one day.

Plan roughly 1 meaningful break for fuel, food, and rest.

The halfway point lands around 124.6 miles from Beaver, OH.

This is a comfortable same-day trip.

Drive Plan

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 80 miles

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 124.6 miles

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Last hour of driving

Traffic, exits, and arrival timing usually matter more near Youngstown, OH than in the middle of the route.

Before You Leave

+

Open the route before leaving Beaver, OH so your first major turns are already loaded.

+

Leave with enough water and a charging cable within reach, not packed away.

+

Check your fuel range against the first long segment, especially if you are starting outside city service areas.

Trip Strategy

Day 1

Settle into the route from Beaver, OH

This is one driving day of about 249.1 miles and 4h 9m.

Your first comfortable stop window is around 80 miles from Beaver, OH.

This route can stay practical as a one-day drive if traffic stays reasonable.

Plan about 1 real break rather than only quick fuel stops.

Best Stop Towns on This Route

These towns line up with the pace of this drive and give you clearer places to stop with a purpose.

Late stop town

Meal stop

Ashley, OH

125 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Travel Advice

Arrival Notes

The final approach into Youngstown, OH usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Youngstown, OH.

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.

Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.

Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Stops Along the Way

Halfway Point

Midpoint

About 124.6 mi from Beaver, OH

Ashville, OH

Fuel and coffee

A short stop after about 80 miles helps settle the day before fatigue starts building.

Ashley, OH

Meal break

The midpoint is around 124.6 miles from Beaver, OH, which is a good place for a longer meal and fuel stop.

These stop ideas are pacing suggestions for the drive, so the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Fuel Type	$/gal	One Way	Round Trip
regular	$3.71	$36.34	$72.67
midgrade	$4.24	$41.60	$83.20
premium	$4.79	$46.98	$93.95
diesel	$4.30	$42.21	$84.42

Based on 25.4 MPG average. Estimated CO2 emission: 87.2 kg one way.

Frequently Asked Questions

The drive from Beaver, OH to Youngstown, OH covers 249.1 miles and takes about 4h 9m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.

The main roads are Main Street, James A, Schuster Road. Expect a mix of highway and local road driving.

This is a comfortable same-day trip.

The midpoint is about 124.6 miles from Beaver, OH. Look for rest areas, gas stations, or food options near the halfway mark.

At current regular gas prices, expect to spend about $36.34 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.

An early start around 7-8 AM gets you there with plenty of daylight left. A late afternoon start means arriving after dark. Morning is better.

Plan about 1 meaningful break for fuel, food, or rest. Plan on a short reset every 3 to 4 hours to stay fresh behind the wheel.