Traveling from Bellevue to Chicago covers 170.5 miles across the Illinois landscape. You should plan for a total drive time of approximately 2 hours and 47 minutes, making this a straightforward journey that easily fits into a single day. Since the entire trip takes place within the Midwest, you can expect familiar regional terrain throughout the duration of your travel. Budgeting roughly $25 for fuel will keep you covered for the trip. Because this is a turn-heavy local drive rather than a high-speed interstate haul, it works best as a direct, no-fuss day trip.
Trip Pace
Same-day drive is realistic
A same-day return is realistic if you keep stops short.
Break Rhythm
1 planned break
A short stop every 2 to 3 hours is enough for this drive.
Midpoint
85.1 miles from Bellevue, IL
A natural place for your longest stop of the day
, about 1h 38m into the drive
.
Who Is This Route For?
Weekend Trip
Doable as a same-day drive at 3h 19m. Total distance: 170.3 miles.
Family Friendly
Moderate complexity with 1 natural rest stops along the way.
Solo Traveler
3h 19m drive, comfortable solo distance.
First-Time Driver
Mostly highway driving (96%). Some complex stretches to watch for.
Drive Character
Expect a hands-on experience behind the wheel, as this route consists entirely of local roads without any highway stretches. You will navigate using South Main Street, West Plank Road, and South Airport Road to reach your destination. Because the path is characterized as a turn-heavy local drive, you will find yourself paying closer attention to navigation than you would on a standard interstate. There is no long-distance cruising here, as evidenced by the longest stretch being 0 miles on South Main Street. Be prepared for a slower, more deliberate pace that requires your full focus on the road ahead.
Most of the miles stay on highways, which makes pacing and fuel planning easier than turn-by-turn city driving.
There are about 19 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
I 55 is the longest continuous segment at about 123.2 miles.
How Hard Is This Drive?
This is a straightforward highway drive that stays mostly on I 55 and I 74. This route has several spots where lane changes, forks, or exits need your full attention. The trickiest moment comes around 39.2 miles in.
Driving Effort7/10
Demanding - plan breaks and stay ahead of the key maneuvers
Balances navigation complexity with total wheel time.
This is a demanding drive. With 14 significant decision points across 170.3 miles, you will need to stay alert — especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.
Where does it get tricky?
The main spots that need attention: at 39.2 miles: Highway fork - watch signs carefully. Multiple destination signs - pick the right one; at 40.6 miles (I 55; US 51): Merge point - match speed before joining. Lane positioning matters here; at 167.4 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one.
Critical Maneuvers
5 of 14 key points
These are the spots where you need to pay the most attention. Preview them before you drive.
6
39.2 mi into trip|~45m in
Keep slight left at fork toward I 55 North, US 51 North: Chicago
Highway fork - watch signs carefully. Multiple destination signs - pick the right one
Toward I 55 North, US 51 North: Chicago
5
40.6 mi into trip|~47m in|I 55; US 51
Merge onto I 55; US 51
Merge point - match speed before joining. Lane positioning matters here
Use the straight / slight right lanes.
8
167.4 mi into trip|~3h 12m in
Take the exit toward Damen Avenue, Ashland Avenue
Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one
Use the straight / slight right lanes.
Exit 290
Toward Damen Avenue, Ashland Avenue
8
167.6 mi into trip|~3h 13m in
Keep slight left at fork toward Damen Avenue
Highway fork - watch signs carefully. Lane positioning matters here
Use the straight / slight right lanes.
Toward Damen Avenue
9
167.9 mi into trip|~3h 13m in
Keep slight left at fork toward Ashland Market Place, South Damen Avenue
Highway fork - watch signs carefully. Lane positioning matters here. Multiple destination signs - pick the right one
Use the left lane.
Toward Ashland Market Place, South Damen Avenue
Main Roads
Road
Distance
Duration
I 55
123.2 mi
2h 19m
I 74
27 mi
28m
I 474
9.1 mi
9m
Stevenson Expressway
3.6 mi
4m
West Plank Road
1.3 mi
2m
South Airport Road
1 mi
1m
West Cermak Road
0.8 mi
1m
South Damen Avenue
0.8 mi
1m
Longest stretch:
I 55
— 123.2 mi, about 2h 19m
Turn-by-Turn Driving Directions
Step-by-step road directions between Bellevue, IL and Chicago, IL.
1
Start on West Closen Road
72 ft·4 sec·West Closen Road
2
Turn right onto South Main Street
0.3 mi·1 min·South Main Street
3
At end of road, turn right onto IL 116
1.3 mi·2 min·West Plank Road
4
Turn sharp right onto South Airport Road
1.0 mi·1 min·South Airport Road
5
Take the ramp
0.5 mi·1 min
6
Merge onto I 474
9.1 mi·9 min·I 474
7
Merge onto I 74
27 mi·28 min·I 74
8
Keep slight left at fork
1.4 mi·2 min
Toward I 55 North, US 51 North: Chicago
9
Merge onto I 55; US 51
123 mi·2 hr 19 min·I 55; US 51
Use the straight / slight right lanes.
10
Continue on I 55
3.6 mi·4 min·Stevenson Expressway
Use the straight / slight right lanes.
11
Take the exit
0.2 mi·24 sec
Exit 290Toward Damen Avenue, Ashland AvenueUse the straight / slight right lanes.
12
Keep slight left at fork
0.3 mi·33 sec
Toward Damen AvenueUse the straight / slight right lanes.
13
Keep slight left at fork
440 ft·12 sec
Toward Ashland Market Place, South Damen AvenueUse the left lane.
14
Turn straight onto South Damen Avenue
0.8 mi·1 min·South Damen Avenue
15
Turn right onto South Blue Island Avenue
0.6 mi·1 min·South Blue Island Avenue
16
Turn right onto West Cermak Road
0.8 mi·1 min·West Cermak Road
17
Turn right
152 ft·11 sec
18
Turn right
0.2 mi·58 sec
19
Arrive at destination
Trip Plan
Since you are navigating local roads for the full 170.5 miles, prioritize a departure time that avoids local commuter congestion to keep your drive time closer to the 2 hour and 47 minute estimate. You should plan for at least one stop to stretch your legs, as the constant turning can be more taxing than highway driving. Keep an eye on your fuel gauge early on, as the $25 estimated cost is based on local road efficiency rather than steady highway speeds. Flexibility is your greatest asset on this route, so don't hesitate to pull over for a quick break if the local turns become repetitive. Given the nature of these local roads, verify your GPS routing before you leave to ensure you are comfortable with the specific turns on South Main Street and West Plank Road.
Morning Departure
An early start around 7-8 AM gets you there with plenty of daylight left.
Evening Departure
A late afternoon start means arriving after dark. Morning is better.
You can normally do this drive in one day.
Plan roughly 1 meaningful break for fuel, food, and rest.
The halfway point lands around 85.1 miles from Bellevue, IL, or about 1h 38m into the drive.
The longest continuous stretch on this route runs about 123.2 miles.
This is a comfortable same-day trip.
Departure
Before you leave
Start with fuel, water, and navigation already sorted so the first hour feels easy.
First stop
Around 80 miles or 1h 32m in
Use this first pause for coffee, a restroom break, and a quick traffic check ahead.
Halfway reset
Around 85.1 miles or 1h 38m in
This is the best place for your longest stop, a real meal, and a full fuel check.
Final approach
Final hour starts around 2h 40m
Traffic, exits, and arrival timing usually matter more near Chicago, IL than in the middle of the route.
Before You Leave
+
Open the route before leaving Bellevue, IL so your first major turns are already loaded.
+
Leave with enough water and a charging cable within reach, not packed away.
+
Check your fuel range against the first long segment, especially if you are starting outside city service areas.
Day 1
Settle into the route from Bellevue, IL
This is one driving day of about 170.3 miles and 3h 19m.
Your first comfortable stop window is around 80 miles from Bellevue, IL.
This route can stay practical as a one-day drive if traffic stays reasonable.
Plan about 1 real break rather than only quick fuel stops.
The longest stretch is on I 55 for about 123.2 miles.
Where to Stop
Rest stops, refuel points, and overnight suggestions along this route.
Halfway Point
Midpoint
About 85.1 mi from Bellevue, IL
· 1h 38m into the drive
Place data sourced from public business listings. Hours and availability may vary.
Fuel & Cost
Regular Gas
$26.62 one way
$53.25 round trip
$3.97/gal25.4 MPG avg60 kg CO2
Fuel Type
$/gal
One Way
Round Trip
midgrade
$4.36
$29.23
$58.47
premium
$4.89
$32.77
$65.55
diesel
$5.61
$37.60
$75.20
No toll roads detected on this route.
Estimated Trip Cost (one way, 1 person)
Fuel
$27
Meals
$25–$50
Total
$52–$77
Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.
Estimated CO2 emission: 59.6 kg one way.
Prices: EIA weekly data, 2026-04-13.
Driving Electric?
About $18 in charging
· 0 stops
· 67% less CO2
Vehicle Type
kWh
Stops
DC Fast
Home Charge
Average EV
51.1
0
$17.88
$8.17
Efficient EV
42.6
0
$14.90
$6.81
EV Truck/SUV
68.1
0
$23.84
$10.90
Gas CO2
60 kg
EV CO2
20 kg (67% less)
This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.
DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.
Travel Intel
Current conditions at both ends of the drive.
Forecast as of Apr 17, 2026
Origin
Bellevue, IL
Evening
in Bellevue on Thursday
Local time
8:42 PM
CDT
Current temp
53°F
Unavailable
Live forecast
Destination
Chicago, IL
Evening
in Chicago on Thursday
Local time
8:42 PM
CDT
Current temp
43°F
Areas Of Fog
ENE 5 mph0% chanceLive forecast
Seasonal Notes
Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.
Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.
Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.
Time zone
Same local time
Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.
Temperature spread
10 degrees cooler at arrival
A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.
Road read
3h 19m on the road
The weather snapshot is not static. If you are leaving later, give both cities one more quick forecast check before departure.
Weather data from the National Weather Service. Conditions may change; check closer to your travel date.
Frequently Asked Questions
The drive from Bellevue, IL to Chicago, IL covers 170.3 miles and takes about 3h 19m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are I 55, I 74, I 474. Most of the drive stays on highways, so watch for ramps and exits.
This is a comfortable same-day trip.
The midpoint is about 85.1 miles from Bellevue, IL. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $26.62 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
An early start around 7-8 AM gets you there with plenty of daylight left. A late afternoon start means arriving after dark. Morning is better.
Plan about 1 meaningful break for fuel, food, or rest. A short stop every 2 to 3 hours is enough for this drive.
This is a demanding drive. With 14 significant decision points across 170.3 miles, you will need to stay alert — especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.
The main spots that need attention: at 39.2 miles: Highway fork - watch signs carefully. Multiple destination signs - pick the right one; at 40.6 miles (I 55; US 51): Merge point - match speed before joining. Lane positioning matters here; at 167.4 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one.
The route from Bellevue, IL to Chicago, IL does not surface many named destination signs beyond the main corridor.
