Origin
Bellview, NJ
Night in Bellview on Wednesday
Local time
9:35 PM
EDT
Current temp
61°F
Unavailable
Live forecast
Trip from Bellview, NJ to Lumberton, NJ
Last recalculated Apr 16, 2026
Drive Time
23m
Distance
14.5 mi
23 km
Drive Score
8/10
Great drive
Same Day?
Yes, doable
Fuel Cost
$2
one way
Best Time to Leave
4 AM
0h 21m
★
6 AM
0h 23m
8 AM
0h 27m
10 AM
0h 25m
12 PM
0h 24m
3 PM
0h 25m
5 PM
0h 27m
8 PM
0h 22m
Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.
Bellview, NJ
Aisling Kerr
Lumberton, NJ
Wikimedia Commons
Trip Overview
The drive from Bellview, NJ to Lumberton, NJ covers 14.5 miles and takes about 23m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.
The route leans on NJ 38, Hartford Road, Bridgeboro Street for much of the mileage, and the overall profile is mixed drive. The longest uninterrupted segment is about 4.4 miles on NJ 38. At current regular gas prices, budget about $2.40 one way before food or hotel costs.
Trip Pace
Same-day drive is realistic
A same-day return is realistic if you keep stops short.
Break Rhythm
0 planned breaks
This drive is short enough that no stops are needed.
Midpoint
7.2 miles from Bellview, NJ
A natural place for your longest stop of the day , about 13m into the drive .
Drive Character
The drive from Bellview, NJ to Lumberton, NJ covers 14.5 miles and takes about 23m, using a mix of highways and local roads.
Expect a mix of faster highway mileage and slower local approaches near the beginning or end.
There are about 14 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
NJ 38 is the longest continuous segment at about 4.4 miles.
How Hard Is This Drive?
This route mixes highway mileage with some local-road sections near the start or finish. There are only a few real navigation decisions along the way. The trickiest moment comes around 2.1 miles in near Fairview Street.
Route Complexity
4/10
Easy - simple navigation with a manageable amount of wheel time
This is a straightforward 23m drive. You will face about 7 decision points, but nothing that requires special attention if you follow navigation.
Where does it get tricky?
The main spots that need attention: at 2.1 miles (Fairview Street): Lane positioning matters here; at 2.1 miles (CR 613 / Franklin Street): Navigation decision point; at 4.9 miles (CR 686 / Hartford Road): Lane positioning matters here.
Critical Maneuvers
5 of 7 key pointsThese are the spots where you need to pay the most attention. Preview them before you drive.
5
2.1 mi into trip
|
~3m in
|
Fairview Street
Turn right onto Fairview Street
Lane positioning matters here
Use the right lane.
5
2.1 mi into trip
|
~3m in
|
CR 613 / Franklin Street
Turn left onto CR 613 / Franklin Street
Navigation decision point
5
4.9 mi into trip
|
~9m in
|
CR 686 / Hartford Road
Turn left onto CR 686 / Hartford Road
Lane positioning matters here
Use the left lane.
5
13.2 mi into trip
|
~21m in
Take the exit
Exit ramp - move to the correct lane early. Lane positioning matters here
Use the slight right lane.
5
13.3 mi into trip
|
~21m in
|
CR 541 / Mount Holly Bypass
Turn right onto CR 541 / Mount Holly Bypass
Lane positioning matters here
Use the right lane.
Main Roads
| Road | Distance | Duration |
|---|---|---|
| NJ 38 | 4.4 mi | 5m |
| Hartford Road | 3.9 mi | 6m |
| Bridgeboro Street | 1.9 mi | 4m |
| Saint Mihiel Drive | 1.3 mi | 2m |
| Broad Street | 0.7 mi | 1m |
| Mount Holly Bypass | 0.6 mi | <1m |
| Bridgeboro Road | 0.6 mi | <1m |
| Main Street | 0.5 mi | <1m |
Longest stretch:
NJ 38
— 4.4 mi, about 5m
Turn-by-Turn Driving Directions
Step-by-step road directions between Bellview, NJ and Lumberton, NJ.
1
Start on Kern Street
301 ft
·
18 sec
·
Kern Street
2
Turn left onto CR 543
0.7 mi
·
1 min
·
Broad Street
3
Continue on CR 543
1.3 mi
·
2 min
·
Saint Mihiel Drive
4
Turn right onto Fairview Street
121 ft
·
7 sec
·
Fairview Street
Use the right lane.
5
Turn left onto CR 613
303 ft
·
6 sec
·
Franklin Street
6
Continue on CR 613
0.2 mi
·
25 sec
·
West Scott Street
7
Continue on CR 613
1.9 mi
·
4 min
·
Bridgeboro Street
8
Continue on CR 613
0.6 mi
·
53 sec
·
Bridgeboro Road
9
Turn left onto CR 686
3.9 mi
·
6 min
·
Hartford Road
Use the left lane.
10
Turn left onto NJ 38
4.4 mi
·
5 min
·
NJ 38
Use the straight lane.
11
Take the exit
0.1 mi
·
20 sec
Use the slight right lane.
12
Turn right onto CR 541
0.6 mi
·
59 sec
·
Mount Holly Bypass
Use the right lane.
13
Turn right onto CR 541
0.5 mi
·
50 sec
·
Main Street
14
Arrive at destination
CR 541
Trip Plan
Morning Departure
Leave by 9 AM and you'll arrive before lunch.
Evening Departure
Even a 4 PM departure gets you there before dark in summer.
You can normally do this drive in one day.
You may only need one short stretch break if traffic stays light.
The halfway point lands around 7.2 miles from Bellview, NJ, or about 13m into the drive.
The longest continuous stretch on this route runs about 4.4 miles.
This is a comfortable same-day trip.
Departure
Before you leave
Start with fuel, water, and navigation already sorted so the first hour feels easy.
First stop
Around 14.5 miles or 23m in
Use this first pause for coffee, a restroom break, and a quick traffic check ahead.
Halfway reset
Around 7.2 miles or 13m in
This is the best place for your longest stop, a real meal, and a full fuel check.
Final approach
Final hour starts around 20m
Traffic, exits, and arrival timing usually matter more near Lumberton, NJ than in the middle of the route.
Before You Leave
+
Have your navigation ready before leaving Bellview, NJ.
Day 1
Settle into the route from Bellview, NJ
This is one driving day of about 14.5 miles and 23m.
At 14.5 miles this is a quick drive — no planned stops needed.
The longest stretch is on NJ 38 for about 4.4 miles.
Where to Stop
Rest stops, refuel points, and overnight suggestions along this route.
Halfway Point
Midpoint
About 7.2 mi from Bellview, NJ · 13m into the drive
Pacing Suggestions
Fuel and coffee
A short stop after about 14.5 miles helps settle the day before fatigue starts building.
Meal break
The midpoint is around 7.2 miles from Bellview, NJ, which is a good place for a longer meal and fuel stop.
Arriving in Lumberton, NJ
Allow a few extra minutes for the final approach into Lumberton, NJ if you are unfamiliar with the area.
These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.
Fuel & Cost
Regular Gas
$2.40 one way
$4.81 round trip
$4.21/gal
25.4 MPG avg
5 kg CO2
| Fuel Type | $/gal | One Way | Round Trip |
|---|---|---|---|
| midgrade | $4.61 | $2.63 | $5.27 |
| premium | $4.93 | $2.81 | $5.62 |
| diesel | $5.61 | $3.20 | $6.40 |
No toll roads detected on this route.
Estimated Trip Cost (one way, 1 person)
Fuel
$2
Meals
$25–$50
Total
$27–$52
Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.
Estimated CO2 emission: 5.1 kg one way. Prices: EIA weekly data, 2026-04-13.
Driving Electric?
About $2 in charging · 0 stops · 60% less CO2
| Vehicle Type | kWh | Stops | DC Fast | Home Charge |
|---|---|---|---|---|
| Average EV | 4.4 | 0 | $1.52 | $0.70 |
| Efficient EV | 3.6 | 0 | $1.27 | $0.58 |
| EV Truck/SUV | 5.8 | 0 | $2.03 | $0.93 |
Gas CO2
5 kg
EV CO2
2 kg (60% less)
This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.
DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.
Travel Intel
Current conditions at both ends of the drive.
Destination
Lumberton, NJ
Night in Lumberton on Wednesday
Local time
9:35 PM
EDT
Current temp
46°F
Unavailable
Live forecast
Time zone
Same local time
Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.
Temperature spread
15 degrees cooler at arrival
A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.
Road read
23m on the road
Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.
Weather data from the National Weather Service. Conditions may change; check closer to your travel date.
Frequently Asked Questions
The drive from Bellview, NJ to Lumberton, NJ covers 14.5 miles and takes about 23m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are NJ 38, Hartford Road, Bridgeboro Street. Expect a mix of highway and local road driving.
This is a comfortable same-day trip.
The midpoint is about 7.2 miles from Bellview, NJ. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $2.40 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
This is a straightforward 23m drive. You will face about 7 decision points, but nothing that requires special attention if you follow navigation.
The main spots that need attention: at 2.1 miles (Fairview Street): Lane positioning matters here; at 2.1 miles (CR 613 / Franklin Street): Navigation decision point; at 4.9 miles (CR 686 / Hartford Road): Lane positioning matters here.
The route from Bellview, NJ to Lumberton, NJ does not surface many named destination signs beyond the main corridor.
Was this route helpful?
Thanks for your feedback!
Your tip has been submitted. Thanks!
/500
Recent Tips
·
Explore More
Continue From Lumberton, NJ
More trips to Lumberton, NJ
Explore more options from Bellview, NJ or browse trips ending in Lumberton, NJ.
Looking for more statewide routes? Browse NJ road trips.
Explore maps for Bellview, NJ or Lumberton, NJ on MapSof.net.