Origin
Bethesda, MD
Morning in Bethesda on Wednesday
Local time
7:41 AM
EDT
Current temp
89°F
Unavailable
Live forecast
Trip from Bethesda, MD to Pikesville, MD
Data updated 1 second ago
Drive Time
1h 2m
Distance
40.8 mi
66 km
Drive Score
6/10
Good drive
Same Day?
Yes, doable
Fuel Cost
$7
one way
EV Charging
Loading...
station data
Best Time to Leave
4 AM
0h 58m
★
6 AM
1h 3m
8 AM
1h 13m
10 AM
1h 6m
12 PM
1h 5m
3 PM
1h 7m
5 PM
1h 12m
8 PM
1h 0m
Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.
Bethesda, MD
Wikimedia Commons
Pikesville, MD
Wikimedia Commons
Trip Overview
The drive from Bethesda, MD to Pikesville, MD covers 40.8 miles and takes about 1h 2m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.
The route leans on Columbia Pike, Baltimore Beltway, I 70 for much of the mileage, and the overall profile is turn-heavy local drive. The longest uninterrupted segment is about 21.3 miles on Columbia Pike. At current regular gas prices, budget about $6.76 one way before food or hotel costs.
Trip Pace
Same-day drive is realistic
A same-day return is realistic if you keep stops short.
Break Rhythm
0 planned breaks
A short stop every 2 to 3 hours is enough for this drive.
Midpoint
20.4 miles from Bethesda, MD
A natural place for your longest stop of the day , about 32m into the drive .
Loading map...
Drive Character
Expect a 1h 2m drive with frequent turns across 40.8 miles of local and secondary roads.
This route has more turning and local-road decision points than a simple highway run.
There are about 24 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
Columbia Pike is the longest continuous segment at about 21.3 miles.
How Hard Is This Drive?
Expect a hands-on drive with frequent turns and local roads rather than long highway stretches. This route has several spots where lane changes, forks, or exits need your full attention. The trickiest moment comes around 2.8 miles in.
Route Complexity
10/10
High effort - long or complex enough to need steady focus all day
This is a demanding drive. With 19 significant decision points across 40.8 miles, you will need to stay alert — especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.
Where does it get tricky?
The main spots that need attention: at 2.8 miles: Lane positioning matters here. Multiple destination signs - pick the right one; at 33.6 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one; at 33.8 miles: Highway fork - watch signs carefully. Lane positioning matters here. Multiple destination signs - pick the right one.
Critical Maneuvers
5 of 19 key pointsThese are the spots where you need to pay the most attention. Preview them before you drive.
7
2.8 mi into trip
|
~7m in
Take the ramp toward I 495 East: Baltimore, Silver Spring
Lane positioning matters here. Multiple destination signs - pick the right one
Use the slight right lane.
Toward I 495 East: Baltimore, Silver Spring
8
33.6 mi into trip
|
~50m in
Take the exit toward I 695 North, I 695 South: New York, Towson, Baltimore, Glen Burnie
Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one
Use the slight right lane.
Exit 91B-A
Toward I 695 North, I 695 South: New York, Tows...
9
33.8 mi into trip
|
~50m in
Keep slight left at fork toward I 695 North: New York, Towson
Highway fork - watch signs carefully. Lane positioning matters here. Multiple destination signs - pick the right one
Use the slight left lane.
Exit 91B
Toward I 695 North: New York, Towson
8
39.5 mi into trip
|
~58m in
Take the exit toward MD 140: Pikesville, Garrison
Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one
Use the slight right lane.
Exit 20
Toward MD 140: Pikesville, Garrison
8
39.8 mi into trip
|
~59m in
Keep slight right at fork toward MD 140 South: Pikesville
Highway fork - watch signs carefully. Lane positioning matters here
Use the slight right lane.
Toward MD 140 South: Pikesville
Towns Mentioned on Route Signs
Based on OSRM destination-sign hints, not a full list of every settlement the road passes.
Between Bethesda, MD and Pikesville, MD, road signs point toward Silver Spring, Towson, Baltimore and Glen Burnie.
Silver Spring
2.8 mi in
|
~7m
Towson
33.6 mi in
|
~50m
Baltimore
33.6 mi in
|
~50m
Glen Burnie
33.6 mi in
|
~50m
Main Roads
| Road | Distance | Duration |
|---|---|---|
| Columbia Pike | 21.3 mi | 29m |
| Baltimore Beltway | 5 mi | 6m |
| I 70 | 3.8 mi | 4m |
| Capital Beltway | 3.4 mi | 4m |
| Colesville Road | 1.2 mi | 2m |
| Jones Bridge Road | 1.1 mi | 2m |
| Reisterstown Road | 0.8 mi | 2m |
| Wisconsin Avenue | 0.7 mi | 1m |
Longest stretch:
Columbia Pike
— 21.3 mi, about 29m
Turn-by-Turn Driving Directions
Step-by-step road directions between Bethesda, MD and Pikesville, MD.
1
Start on this road
44 ft
·
5 sec
·
this road
2
Turn right onto Bethesda Avenue
510 ft
·
24 sec
·
Bethesda Avenue
3
Turn left onto Arlington Road
0.3 mi
·
55 sec
·
Arlington Road
4
Turn right onto Edgemoor Lane
0.3 mi
·
51 sec
·
Edgemoor Lane
5
Turn left onto MD 355
0.7 mi
·
1 min
·
Wisconsin Avenue
6
Continue on MD 355
0.1 mi
·
19 sec
·
Rockville Pike
7
Turn right onto Jones Bridge Road
1.1 mi
·
2 min
·
Jones Bridge Road
8
Turn left onto MD 185
0.3 mi
·
39 sec
·
Connecticut Avenue
Use the left / slight left lanes.
9
Take the ramp
0.2 mi
·
31 sec
Toward I 495 East: Baltimore, Silver Spring
Use the slight right lane.
10
Merge onto I 495
3.4 mi
·
4 min
·
Capital Beltway
Use the straight / slight right lanes.
11
Take the exit
0.2 mi
·
28 sec
Exit 30A
Toward US 29 North: Columbia
Use the straight / right lanes.
12
Merge onto US 29
1.2 mi
·
2 min
·
Colesville Road
13
Continue on US 29
21 mi
·
29 min
·
Columbia Pike
Use the straight / slight right lanes.
14
Take the exit
0.7 mi
·
1 min
Exit 25A
Toward I 70 East: Baltimore
Use the slight right lane.
15
Merge onto I 70
3.8 mi
·
4 min
·
I 70
16
Take the exit
0.2 mi
·
16 sec
Exit 91B-A
Toward I 695 North, I 695 South: New York, Towson, Baltimore, Glen Burnie
Use the slight right lane.
17
Keep slight left at fork
0.8 mi
·
1 min
Exit 91B
Toward I 695 North: New York, Towson
Use the slight left lane.
18
Merge onto I 695
5.0 mi
·
6 min
·
Baltimore Beltway
19
Take the exit
0.2 mi
·
40 sec
Exit 20
Toward MD 140: Pikesville, Garrison
Use the slight right lane.
20
Keep slight right at fork
0.1 mi
·
20 sec
Toward MD 140 South: Pikesville
Use the slight right lane.
21
Turn straight onto MD 140
0.8 mi
·
2 min
·
Reisterstown Road
Use the straight lane.
22
Turn left onto East Sudbrook Lane
177 ft
·
6 sec
·
East Sudbrook Lane
23
Turn right
410 ft
·
30 sec
24
Arrive at destination
Trip Plan
Morning Departure
Leave by 9 AM and you'll arrive before lunch.
Evening Departure
Even a 4 PM departure gets you there before dark in summer.
You can normally do this drive in one day.
You may only need one short stretch break if traffic stays light.
The halfway point lands around 20.4 miles from Bethesda, MD, or about 32m into the drive.
The longest continuous stretch on this route runs about 21.3 miles.
This is a comfortable same-day trip.
Departure
Before you leave
Start with fuel, water, and navigation already sorted so the first hour feels easy.
First stop
Around 40.8 miles or 1h 2m in
Use this first pause for coffee, a restroom break, and a quick traffic check ahead.
Halfway reset
Around 20.4 miles or 32m in
This is the best place for your longest stop, a real meal, and a full fuel check.
Final approach
Final hour starts around 52m
Traffic, exits, and arrival timing usually matter more near Pikesville, MD than in the middle of the route.
Before You Leave
+
Open the route before leaving Bethesda, MD so your first major turns are already loaded.
+
Leave with enough water and a charging cable within reach, not packed away.
+
Check your fuel range against the first long segment, especially if you are starting outside city service areas.
Day 1
Settle into the route from Bethesda, MD
This is one driving day of about 40.8 miles and 1h 2m.
Your first comfortable stop window is around 80 miles from Bethesda, MD.
This route can stay practical as a one-day drive if traffic stays reasonable.
You may only need one short stretch stop if conditions stay smooth.
The longest stretch is on Columbia Pike for about 21.3 miles.
Where to Stop
Rest stops, refuel points, and overnight suggestions along this route.
Halfway Point
Midpoint
About 20.4 mi from Bethesda, MD · 32m into the drive
Mid-route town
Meal stop
20 mi into the route
Best for: Lunch, fuel, and a longer reset
This sits close to the middle of the route, so it works well for the longest stop of the day.
Pacing Suggestions
Fuel and coffee
A short stop after about 40.8 miles helps settle the day before fatigue starts building.
Meal break
The midpoint is around 20.4 miles from Bethesda, MD, which is a good place for a longer meal and fuel stop.
Arriving in Pikesville, MD
The final approach into Pikesville, MD usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.
Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Pikesville, MD.
These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.
Fuel & Cost
Regular Gas
$6.76 one way
$13.53 round trip
$4.21/gal
25.4 MPG avg
14 kg CO2
| Fuel Type | $/gal | One Way | Round Trip |
|---|---|---|---|
| midgrade | $4.61 | $7.41 | $14.82 |
| premium | $4.93 | $7.91 | $15.83 |
| diesel | $5.61 | $9.01 | $18.02 |
No toll roads detected on this route.
Estimated Trip Cost (one way, 1 person)
Fuel
$7
Meals
$25–$50
Total
$32–$57
Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.
Estimated CO2 emission: 14.3 kg one way. Prices: EIA weekly data, 2026-04-13.
Driving Electric?
About $4 in charging · 0 stops · 64% less CO2
| Vehicle Type | kWh | Stops | DC Fast | Home Charge |
|---|---|---|---|---|
| Average EV | 12.2 | 0 | $4.28 | $1.96 |
| Efficient EV | 10.2 | 0 | $3.57 | $1.63 |
| EV Truck/SUV | 16.3 | 0 | $5.71 | $2.61 |
Gas CO2
14 kg
EV CO2
5 kg (64% less)
This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.
DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.
Travel Intel
Current conditions at both ends of the drive.
Destination
Pikesville, MD
Morning in Pikesville on Wednesday
Local time
7:41 AM
EDT
Current temp
84°F
Unavailable
Live forecast
Seasonal Notes
Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.
Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.
Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.
Time zone
Same local time
Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.
Temperature spread
5 degrees cooler at arrival
A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.
Road read
1h 2m on the road
Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.
Weather data from the National Weather Service. Conditions may change; check closer to your travel date.
Frequently Asked Questions
The drive from Bethesda, MD to Pikesville, MD covers 40.8 miles and takes about 1h 2m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are Columbia Pike, Baltimore Beltway, I 70. Expect a mix of highway and local road driving.
This is a comfortable same-day trip.
The midpoint is about 20.4 miles from Bethesda, MD. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $6.76 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
This is a demanding drive. With 19 significant decision points across 40.8 miles, you will need to stay alert — especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.
The main spots that need attention: at 2.8 miles: Lane positioning matters here. Multiple destination signs - pick the right one; at 33.6 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one; at 33.8 miles: Highway fork - watch signs carefully. Lane positioning matters here. Multiple destination signs - pick the right one.
Between Bethesda, MD and Pikesville, MD, road signs point toward Silver Spring, Towson, Baltimore and Glen Burnie.
Was this route helpful?
Thanks for your feedback!
Your tip has been submitted. Thanks!
/500
Recent Tips
·
Explore More
Continue From Pikesville, MD
Explore more options from Bethesda, MD or browse trips ending in Pikesville, MD.
Looking for more statewide routes? Browse MD road trips.
Explore maps for Bethesda, MD or Pikesville, MD on MapSof.net.