Skip to main content

Trip from Blades, DE to Pike Creek Valley, DE

Compiled and reviewed by the Trip.ovh planning team at COD Solutions Oy · Last reviewed Apr 17, 2026 · Editorial standards

Drive Time

1h 39m

Distance

86.7 mi

139 km

Drive Score

7/10

Good drive

Same Day?

Yes, doable

Fuel Cost

$14

one way

EV Charging

Unknown

Best Time to Leave

Save up to 22 min
4 AM
1h 32m ★
6 AM
1h 39m
8 AM
1h 54m
10 AM
1h 44m
12 PM
1h 43m
3 PM
1h 45m
5 PM
1h 53m
8 PM
1h 35m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

sharp part of a weapon or cutting tool

Blades, DE

Wikimedia Commons

Downtown Pike Creek Valley, DE, DE

Pike Creek Valley, DE

Tom Fisk

Trip Overview

This 86.7-mile journey from Blades to Pike Creek Valley in Delaware is a straightforward, local drive that can easily be completed in about 1 hour and 39 minutes. With no highway driving involved, it's a good option if you prefer sticking to surface streets. The estimated fuel cost for this trip is around $14, making it an economical choice for a day trip. Given its manageable length and duration, this route is perfectly suited for a single day of travel, allowing for flexibility in your schedule without the need for an overnight stay. It's a practical way to navigate within the Northeast region of Delaware.

Trip Pace

Same-day drive is realistic

A same-day return is realistic if you keep stops short.

Midpoint

43.3 miles from Blades, DE

A natural place for your longest stop of the day , about 49m into the drive .

Who Is This Route For?

Weekend Trip

Doable as a same-day drive at 1h 39m. Total distance: 86.7 miles.

Family Friendly

Moderate complexity with 0 natural rest stops along the way.

Solo Traveler

1h 39m drive, comfortable solo distance.

First-Time Driver

Mostly highway driving (0%). Straightforward navigation.

Scenic Drive

Turn-heavy local drive route profile.

Drive Character

Expect a turn-heavy local drive for the entirety of this 86.7-mile route, as indicated by its 0% highway share. The drive progresses along main roads like East High Street and Concord Road, eventually leading onto Sussex Highway. Since there's no significant highway component, the longest uninterrupted stretch will be relatively short, requiring frequent adjustments in speed and direction. This means you'll be engaging with the local road network consistently, so staying alert to traffic signals and intersections is key throughout the 1 hour and 39 minute journey.

This route has more turning and local-road decision points than a simple highway run.
There are about 19 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
East High Street is one of the defining roads on this drive.

How Hard Is This Drive?

Expect a hands-on drive with frequent turns and local roads rather than long highway stretches. Navigation is very simple - set it and forget it for most of the drive.

Driving Effort 1/10

Very easy - short and simple to drive

Balances navigation complexity with total wheel time.

The drive from Blades, DE to Pike Creek Valley, DE is easy. At 1h 39m with 0% highway, most drivers will find it relaxed and low-stress.

Where does it get tricky?

This route does not have any notably tricky sections. Most of the drive from Blades, DE to Pike Creek Valley, DE is straightforward, with well-signed roads and simple exits.

Main Roads

Road Distance Duration
East High Street
Concord Road
Sussex Highway
South Dupont Highway
Wilmington
Puncheon Run Connector
Korean War Veterans Memorial Highway
Stanton Christiana Road

Some road-level metrics are being recalculated.

Longest stretch: East High Street — detailed segment metrics are refreshing.

Turn-by-Turn Driving Directions

Step-by-step road directions between Blades, DE and Pike Creek Valley, DE.

1

Start on South Market Street

95 ft · 5 sec · South Market Street
2

Turn right onto East High Street

0.5 mi · 56 sec · East High Street
3

Continue on Concord Road

0.4 mi · 49 sec · Concord Road
4

Turn left onto Sussex Highway

14 mi · 18 min · Sussex Highway
5

Continue on South Dupont Highway

21 mi · 25 min · South Dupont Highway
6

Take the exit slight right toward Wilmington, Delaware Memorial Bridge

0.1 mi · 9 sec · Wilmington, Delaware Memorial Bridge
7

Continue on Puncheon Run Connector

2.4 mi · 3 min · Puncheon Run Connector
8

Merge slight left onto Korean War Veterans Memorial Highway

2.3 mi · 2 min · Korean War Veterans Memorial Highway
9

Keep slight right to continue on Korean War Veterans Memorial Highway

28 mi · 31 min · Korean War Veterans Memorial Highway
10

Keep slight left to continue on Korean War Veterans Memorial Highway

6.5 mi · 7 min · Korean War Veterans Memorial Highway
11

Keep slight right to continue on Korean War Veterans Memorial Highway

5.7 mi · 7 min · Korean War Veterans Memorial Highway
12

Continue on Stanton Christiana Road

1.6 mi · 2 min · Stanton Christiana Road
13

Continue on Mitch Road

0.4 mi · 37 sec · Mitch Road
14

Continue on Limestone Road

3.3 mi · 6 min · Limestone Road
15

Turn left onto Skyline Drive

0.6 mi · 1 min · Skyline Drive
16

Turn right onto Foxcroft Drive

0.2 mi · 55 sec · Foxcroft Drive
17

Turn left

335 ft · 30 sec
18

Turn left

36 ft · 3 sec
19

Arrive at your destination

Trip Plan

For this 86.7-mile drive, which takes approximately 1 hour and 39 minutes, flexibility is your advantage. Leaving anytime should be manageable, but consider avoiding peak local traffic times if possible. With no long stretches of highway, you won't need to worry about extensive fuel stops, and the estimated $14 fuel cost is quite budget-friendly. Plan for frequent turns and intersections rather than long, straightaways. A specific tip for this route: pay close attention to signage for Concord Road as it plays a significant role in navigating through local areas.

Morning Departure

Leave by 9 AM and you'll arrive before lunch.

Evening Departure

Even a 4 PM departure gets you there before dark in summer.

You can normally do this drive in one day.
You may only need one short stretch break if traffic stays light.
The halfway point lands around 43.3 miles from Blades, DE, or about 49m into the drive.

This is a comfortable same-day trip.

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 19 miles or 21m in

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 43.3 miles or 49m in

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Final hour starts around 1h 24m

Traffic, exits, and arrival timing usually matter more near Pike Creek Valley, DE than in the middle of the route.

Before You Leave

+

Open the route before leaving Blades, DE so your first major turns are already loaded.

Day 1

Settle into the route from Blades, DE

This is one driving day of about 86.7 miles and 1h 39m.

Your first comfortable stop window is around 19 miles from Blades, DE.
This route can stay practical as a one-day drive if traffic stays reasonable.

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 43.3 mi from Blades, DE · 49m into the drive

town in New Castle County, Delaware, United States

Mid-route town

Meal stop

Middletown, DE

43 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Pacing Suggestions

Dover, DE

Fuel and coffee

A short stop after about 19 miles helps settle the day before fatigue starts building.

Middletown, DE

Meal break

The midpoint is around 43.3 miles from Blades, DE, which is a good place for a longer meal and fuel stop.

Arriving in Pike Creek Valley, DE

The final approach into Pike Creek Valley, DE usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Regular Gas

$14.37 one way

$28.75 round trip

$4.21/gal 25.4 MPG avg 30 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.61 $15.74 $31.49
premium $4.93 $16.81 $33.63
diesel $5.61 $19.14 $38.28

No toll roads detected on this route.

Estimated Trip Cost (one way, 1 person)

Fuel

$14

Meals

$25–$50

Total

$39–$64

Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.

Estimated CO2 emission: 30.3 kg one way. Prices: EIA weekly data, 2026-04-13.

Driving Electric?

About $9 in charging · 0 stops · 67% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 26 0 $9.10 $4.16
Efficient EV 21.7 0 $7.59 $3.47
EV Truck/SUV 34.7 0 $12.14 $5.55

Gas CO2

30 kg

EV CO2

10 kg (67% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast as of Apr 15, 2026

Origin

Blades, DE

Afternoon in Blades on Friday

Local time

2:41 PM

EDT

Current temp

64°F

Unavailable

Live forecast

Destination

Pike Creek Valley, DE

Afternoon in Pike Creek Valley on Friday

Local time

2:41 PM

EDT

Current temp

62°F

Unavailable

Live forecast

59°F

Middletown, DE

43 mi in

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.

Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.

Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

2 degrees cooler at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

1h 39m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Blades, DE to Pike Creek Valley, DE covers 86.7 miles and takes about 1h 39m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.

The main roads are East High Street, Concord Road, Sussex Highway. Expect a mix of highway and local road driving.

This is a comfortable same-day trip.

The midpoint is about 43.3 miles from Blades, DE. Look for rest areas, gas stations, or food options near the halfway mark.

At current regular gas prices, expect to spend about $14.37 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.

Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.

The drive from Blades, DE to Pike Creek Valley, DE is easy. At 1h 39m with 0% highway, most drivers will find it relaxed and low-stress.

This route does not have any notably tricky sections. Most of the drive from Blades, DE to Pike Creek Valley, DE is straightforward, with well-signed roads and simple exits.

The route from Blades, DE to Pike Creek Valley, DE does not surface many named destination signs beyond the main corridor.

How this page is built

Compiled by the Trip.ovh planning team at COD Solutions Oy from open government datasets — OSRM over OpenStreetMap for geometry, and EIA for fuel prices. See our methodology for refresh cadence and limitations.

Was this helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Explore more options from Blades, DE or browse trips ending in Pike Creek Valley, DE.

Looking for more statewide routes? Browse DE road trips.