Blairsville, PA to Scranton, PA is 241.2 miles and takes about 4h 44m via Keystone Shortway and I-99, with a fuel budget near $40 and enough daylight to finish in a day. This drive stays within Pennsylvania, traversing the Northeast region of the state. Expect a mixed driving experience that's manageable for a single-day trip. The route offers a blend of highway speeds and potentially more local road sections, making it a practical choice for getting from point A to point B without significant detours. Consider this a straightforward journey through the heart of PA.
Trip Pace
Same-day drive is realistic
A same-day return is possible, but it will make for a full day on the road.
Break Rhythm
1 planned break
Plan on a short reset every 3 to 4 hours to stay fresh behind the wheel.
Midpoint
120.6 miles from Blairsville, PA
A natural place for your longest stop of the day
, about 2h 26m into the drive
.
Scranton is a city in Northeastern Pennsylvania. It is near Wilkes-Barre, and is the seventh most populous city in the state. Today, it is perhaps best known as the setting of the hit TV show "The Office" and the birthplace of Joe Biden, the 46th President of the United States.
Doable as a same-day drive at 4h 44m. Total distance: 241.2 miles.
Family Friendly
Moderate complexity with 1 natural rest stops along the way.
Solo Traveler
4h 44m drive, comfortable solo distance.
Scenic Drive
Mixed drive route profile with national parks nearby.
Drive Character
This trip features a mixed drive profile, with 37% of the route utilizing highways. You'll experience stretches on the Keystone Shortway and I-99, offering periods of faster travel. The longest uninterrupted drive on the Keystone Shortway measures 99.3 miles, providing a substantial segment of consistent road. As you progress, the character of the drive will shift, moving between these primary arteries and potentially sections of the historic William Penn Highway, offering a varied driving experience.
Expect a mix of faster highway mileage and slower local approaches near the beginning or end.
There are about 23 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
Keystone Shortway is the longest continuous segment at about 99.3 miles.
How Hard Is This Drive?
This route mixes highway mileage with some local-road sections near the start or finish. This route has several spots where lane changes, forks, or exits need your full attention. The trickiest moment comes around 1.9 miles in near US 22; US 119 / William Penn Highway.
Driving Effort7/10
Demanding - plan breaks and stay ahead of the key maneuvers
Balances navigation complexity with total wheel time.
This is a demanding drive. With 15 significant decision points across 241.2 miles, you will need to stay alert - especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.
Where does it get tricky?
The main spots that need attention: at 1.9 miles (US 22; US 119 / William Penn Highway): Lane positioning matters here; at 48.6 miles: Highway fork - watch signs carefully. Multiple destination signs - pick the right one; at 90.5 miles (I 99; US 220; US 322): Highway fork - watch signs carefully. Lane positioning matters here.
Critical Maneuvers
5 of 15 key points
These are the spots where you need to pay the most attention. Preview them before you drive.
6
1.9 mi into trip|~4m in|US 22; US 119 / William Penn Highway
Turn right onto US 22; US 119 / William Penn Highway
Lane positioning matters here
Use the straight / right lanes.
6
48.6 mi into trip|~1h 5m in
Keep slight left at fork toward I 99 North, US 220 North: Altoona
Highway fork - watch signs carefully. Multiple destination signs - pick the right one
Toward I 99 North, US 220 North: Altoona
6
90.5 mi into trip|~1h 52m in|I 99; US 220; US 322
Keep slight left at fork onto I 99; US 220; US 322
Highway fork - watch signs carefully. Lane positioning matters here
Use the straight lane.
7
106.8 mi into trip|~2h 11m in
Turn left toward I 80 East, US 220 North: Williamsport
Lane positioning matters here. Multiple destination signs - pick the right one
Use the left lane.
Toward I 80 East, US 220 North: Williamsport
7
240.6 mi into trip|~4h 43m in|Cedar Avenue
At end of road, turn right onto Cedar Avenue
Lane positioning matters here
Use the straight / right lanes.
Towns Mentioned on Route Signs
Based on OSRM destination-sign hints, not a full list of every settlement the road passes.
On the drive from Blairsville, PA to Scranton, PA, road signs begin pointing toward Bedford along the way.
Bedford
48.1 mi in|~1h 5m
Main Roads
Road
Distance
Duration
Keystone Shortway
99.3 mi
1h 47m
I 99
57.2 mi
1h 4m
William Penn Highway
32.6 mi
41m
I 81
32.4 mi
39m
Admiral Peary Highway
13.7 mi
19m
River Street
1 mi
1m
Old William Penn Highway
0.9 mi
1m
East Market Street
0.7 mi
1m
Longest stretch:
Keystone Shortway
— 99.3 mi, about 1h 47m
Turn-by-Turn Driving Directions
Step-by-step road directions between Blairsville, PA and Scranton, PA.
1
Start on this road
58 ft·9 sec·this road
2
Turn left onto East Market Street
0.7 mi·1 min·East Market Street
3
Continue on Old William Penn Highway
0.9 mi·1 min·Old William Penn Highway
4
Turn left onto Villa Road
0.2 mi·34 sec·Villa Road
5
Turn right onto US 22; US 119
16 mi·21 min·William Penn Highway
Use the straight / right lanes.
6
Continue on US 22
14 mi·19 min·Admiral Peary Highway
Use the straight / right lanes.
7
Continue on US 22
17 mi·19 min·William Penn Highway
8
Continue on this road
0.5 mi·45 sec·this road
Toward I 99, US 220: Altoona, Bedford
9
Keep slight left at fork
0.9 mi·1 min
Toward I 99 North, US 220 North: Altoona
10
Merge onto I 99; US 220
41 mi·44 min·I 99; US 220
11
Keep slight left at fork onto I 99; US 220; US 322
4.0 mi·4 min·I 99; US 220; US 322
Use the straight lane.
12
Keep slight left at fork onto I 99; US 220
12 mi·14 min·I 99; US 220
Toward I 99 North, US 220 North: Bellefonte
13
Turn left
0.2 mi·31 sec
Toward I 80 East, US 220 North: WilliamsportUse the left lane.
14
Merge onto I 80; US 220
99 mi·1 hr 47 min·Keystone Shortway
15
Take the exit
0.7 mi·1 min
Exit 260BToward I 81 North: Wilkes-Barre
16
Merge onto I 81
32 mi·39 min·I 81
17
Take the exit
0.2 mi·22 sec
Toward PA 307
18
Turn left onto River Street
1.0 mi·1 min·River Street
19
At end of road, turn right onto Cedar Avenue
0.3 mi·31 sec·Cedar Avenue
Use the straight / right lanes.
20
Continue on Adams Avenue
0.1 mi·17 sec·Adams Avenue
21
Turn left onto Biden Street
0.2 mi·25 sec·Biden Street
22
Turn right onto Wyoming Avenue
135 ft·4 sec·Wyoming Avenue
23
Arrive at destination
Wyoming Avenue
Trip Plan
Given the 4h 44m duration, leaving Blairsville in the morning allows ample time to reach Scranton before evening. With only one recommended stop and a relatively short overall distance, you have flexibility in pacing. Keep an eye on your fuel gauge, especially during the 99.3-mile stretch on the Keystone Shortway, as services might be less frequent in certain areas. The $40 fuel cost is a good estimate for planning, but it's always wise to have a buffer. This is a comfortable one-day drive, so you can afford to take your time.
Morning Departure
An early start around 7-8 AM gets you there with plenty of daylight left.
Evening Departure
A late afternoon start means arriving after dark. Morning is better.
You can normally do this drive in one day.
Plan roughly 1 meaningful break for fuel, food, and rest.
The halfway point lands around 120.6 miles from Blairsville, PA, or about 2h 26m into the drive.
The longest continuous stretch on this route runs about 99.3 miles.
This is a comfortable same-day trip.
Departure
Before you leave
Start with fuel, water, and navigation already sorted so the first hour feels easy.
First stop
Around 53 miles or 1h 11m in
Use this first pause for coffee, a restroom break, and a quick traffic check ahead.
Halfway reset
Around 120.6 miles or 2h 26m in
This is the best place for your longest stop, a real meal, and a full fuel check.
Final approach
Final hour starts around 3h 50m
Traffic, exits, and arrival timing usually matter more near Scranton, PA than in the middle of the route.
Before You Leave
+
Open the route before leaving Blairsville, PA so your first major turns are already loaded.
+
Leave with enough water and a charging cable within reach, not packed away.
+
Check your fuel range against the first long segment, especially if you are starting outside city service areas.
Day 1
Settle into the route from Blairsville, PA
This is one driving day of about 241.2 miles and 4h 44m.
Your first comfortable stop window is around 53 miles from Blairsville, PA.
This route can stay practical as a one-day drive if traffic stays reasonable.
Plan about 1 real break rather than only quick fuel stops.
The longest stretch is on Keystone Shortway for about 99.3 miles.
Where to Stop
Rest stops, refuel points, and overnight suggestions along this route.
Halfway Point
Midpoint
About 120.6 mi from Blairsville, PA
· 2h 26m into the drive
Place data sourced from public business listings. Hours and availability may vary.
National Parks Near This Route
Worth a detour if your schedule allows.
Johnstown Flood National Memorial
National Memorial
The South Fork Dam failed on Friday, May 31, 1889, and unleashed 20,000,000 tons of water that devastated Johnstown, PA. The flood killed 2,209 people but it brought the nation and the world together...
On Tuesday morning, September 11, 2001, the U.S. came under attack when four commercial airliners were hijacked and used to strike targets on the ground. Nearly 3,000 people tragically lost their live...
27 mi from route
~67 min detour
Free
near mile 16.6
Station data from NREL Alternative Fuel Stations database.
Driving Electric?
About $25 in charging
· 0 stops
· 67% less CO2
Vehicle Type
kWh
Stops
DC Fast
Home Charge
Average EV
72.4
0
$25.33
$11.58
Efficient EV
60.3
0
$21.10
$9.65
EV Truck/SUV
96.5
1
$33.77
$15.44
Gas CO2
84 kg
EV CO2
28 kg (67% less)
Plan for 0 charging stops, roughly every 270 miles. Allow 25-40 minutes per stop at a DC fast charger.
DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.
Travel Intel
Current conditions at both ends of the drive.
Forecast as of Apr 18, 2026
Origin
Blairsville, PA
Morning
in Blairsville on Saturday
Local time
8:42 AM
EDT
Current temp
68°F
Unavailable
Live forecast
Destination
Scranton, PA
Morning
in Scranton on Saturday
Local time
8:42 AM
EDT
Current temp
55°F
Partly Cloudy
E 2 mph0% chanceLive forecast
Seasonal Notes
Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.
Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.
Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.
Time zone
Same local time
Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.
Temperature spread
13 degrees cooler at arrival
A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.
Road read
4h 44m on the road
An early start around 7-8 AM gets you there with plenty of daylight left.
Weather data from the National Weather Service. Conditions may change; check closer to your travel date.
Frequently Asked Questions
The drive from Blairsville, PA to Scranton, PA covers 241.2 miles and takes about 4h 44m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are Keystone Shortway, I 99, William Penn Highway. Expect a mix of highway and local road driving.
This is a comfortable same-day trip.
The midpoint is about 120.6 miles from Blairsville, PA. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $39.99 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
An early start around 7-8 AM gets you there with plenty of daylight left. A late afternoon start means arriving after dark. Morning is better.
Plan about 1 meaningful break for fuel, food, or rest. Plan on a short reset every 3 to 4 hours to stay fresh behind the wheel.
This is a demanding drive. With 15 significant decision points across 241.2 miles, you will need to stay alert - especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.
The main spots that need attention: at 1.9 miles (US 22; US 119 / William Penn Highway): Lane positioning matters here; at 48.6 miles: Highway fork - watch signs carefully. Multiple destination signs - pick the right one; at 90.5 miles (I 99; US 220; US 322): Highway fork - watch signs carefully. Lane positioning matters here.
On the drive from Blairsville, PA to Scranton, PA, road signs begin pointing toward Bedford along the way.
How this page is built
Compiled by the Trip.ovh planning team at COD Solutions Oy from open government datasets — OSRM over OpenStreetMap for geometry, EIA for fuel prices, NREL for EV charging, and NPS for national parks. See our methodology for refresh cadence and limitations.
