Skip to main content

Trip from Blakeslee, NY to Sullivan, NY

Data updated 0 seconds ago

Drive Time

10m

Distance

6.3 mi

10 km

Drive Score

6/10

Good drive

Same Day?

Yes, doable

Fuel Cost

$1

one way

EV Charging

Loading...

station data

Best Time to Leave

4 AM
0h 10m ★
6 AM
0h 11m
8 AM
0h 13m
10 AM
0h 12m
12 PM
0h 11m
3 PM
0h 12m
5 PM
0h 13m
8 PM
0h 10m ★

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

human settlement in Madison County, New York, United States of America

Sullivan, NY

Wikimedia Commons

Trip Overview

The drive from Blakeslee, NY to Sullivan, NY covers 6.3 miles and takes about 10m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.

The route leans on Perryville Road, Madison Street, Falls Boulevard for much of the mileage, and the overall profile is turn-heavy local drive. At current regular gas prices, budget about $1.04 one way before food or hotel costs.

Trip Pace

Same-day drive is realistic

A same-day return is realistic if you keep stops short.

Break Rhythm

0 planned breaks

A short stop every 2 to 3 hours is enough for this drive.

Midpoint

3.1 miles from Blakeslee, NY

A natural place for your longest stop of the day , about 5m into the drive .

Loading map...

Drive Character

Expect a 10m drive with frequent turns across 6.3 miles of local and secondary roads.

This route has more turning and local-road decision points than a simple highway run.
There are about 9 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
Perryville Road is one of the defining roads on this drive.

How Hard Is This Drive?

Expect a hands-on drive with frequent turns and local roads rather than long highway stretches. Navigation is very simple — set it and forget it for most of the drive.

Route Complexity 1/10

Very easy - short and simple to drive

The drive from Blakeslee, NY to Sullivan, NY is easy. At 10m with 0% highway, most drivers will find it relaxed and low-stress.

Where does it get tricky?

This route does not have any notably tricky sections. Most of the drive from Blakeslee, NY to Sullivan, NY is straightforward, with well-signed roads and simple exits.

Main Roads

Road Distance Duration
Perryville Road Unavailable Refreshing
Madison Street Unavailable Refreshing
Falls Boulevard Unavailable Refreshing
Genesee Street Unavailable Refreshing
East Genesee Street Unavailable Refreshing
State Route 5 Unavailable Refreshing
Canaseraga Road Unavailable Refreshing

Per-road distance and duration are being refreshed from OSRM for this route.

Longest stretch: Perryville Road — detailed segment metrics are refreshing.

Turn-by-Turn Driving Directions

Step-by-step road directions between Blakeslee, NY and Sullivan, NY.

1

Start on Perryville Road

0.2 mi · 27 sec · Perryville Road
2

Continue on Perryville Road

3.3 mi · 7 min · Perryville Road
3

Continue on Madison Street

0.4 mi · 57 sec · Madison Street
4

Turn right onto Falls Boulevard

0.1 mi · 21 sec · Falls Boulevard
5

Turn right onto Genesee Street

0.7 mi · 1 min · Genesee Street
6

Continue on East Genesee Street

0.9 mi · 1 min · East Genesee Street
7

Continue on State Route 5

354 ft · 9 sec · State Route 5
8

Turn left onto Canaseraga Road

62 ft · 3 sec · Canaseraga Road
9

Arrive at your destination

Trip Plan

Morning Departure

Leave by 9 AM and you'll arrive before lunch.

Evening Departure

Even a 4 PM departure gets you there before dark in summer.

You can normally do this drive in one day.
You may only need one short stretch break if traffic stays light.
The halfway point lands around 3.1 miles from Blakeslee, NY, or about 5m into the drive.

This is a comfortable same-day trip.

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 6.3 miles or 10m in

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 3.1 miles or 5m in

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Final hour starts around 9m

Traffic, exits, and arrival timing usually matter more near Sullivan, NY than in the middle of the route.

Before You Leave

+

Open the route before leaving Blakeslee, NY so your first major turns are already loaded.

+

Leave with enough water and a charging cable within reach, not packed away.

+

Check your fuel range against the first long segment, especially if you are starting outside city service areas.

Day 1

Settle into the route from Blakeslee, NY

This is one driving day of about 6.3 miles and 10m.

Your first comfortable stop window is around 80 miles from Blakeslee, NY.
This route can stay practical as a one-day drive if traffic stays reasonable.
You may only need one short stretch stop if conditions stay smooth.

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 3.1 mi from Blakeslee, NY · 5m into the drive

city in and county seat of Onondaga County, New York, United States

Mid-route town

Meal stop

Syracuse, NY

3 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Pacing Suggestions

Syracuse, NY

Fuel and coffee

A short stop after about 6.3 miles helps settle the day before fatigue starts building.

Syracuse, NY

Meal break

The midpoint is around 3.1 miles from Blakeslee, NY, which is a good place for a longer meal and fuel stop.

Arriving in Sullivan, NY

The final approach into Sullivan, NY usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Sullivan, NY.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Regular Gas

$1.04 one way

$2.07 round trip

$4.18/gal 25.4 MPG avg 2 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.52 $1.12 $2.24
premium $4.92 $1.22 $2.44
diesel $5.61 $1.39 $2.78

No toll roads detected on this route.

Estimated Trip Cost (one way, 1 person)

Fuel

$1

Meals

$25–$50

Total

$26–$51

Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.

Estimated CO2 emission: 2.2 kg one way. Prices: EIA weekly data, 2026-04-13.

Driving Electric?

About $1 in charging · 0 stops · 50% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 1.9 0 $0.66 $0.30
Efficient EV 1.6 0 $0.55 $0.25
EV Truck/SUV 2.5 0 $0.88 $0.40

Gas CO2

2 kg

EV CO2

1 kg (50% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast data refreshed 4 days ago

Origin

Blakeslee, NY

Morning in Blakeslee on Wednesday

Local time

8:33 AM

EDT

Current temp

50°F

Unavailable

Live forecast

Destination

Sullivan, NY

Morning in Sullivan on Wednesday

Local time

8:33 AM

EDT

Current temp

49°F

Unavailable

Live forecast

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.

Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.

Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

1 degrees cooler at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

10m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Blakeslee, NY to Sullivan, NY covers 6.3 miles and takes about 10m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are Perryville Road, Madison Street, Falls Boulevard. Expect a mix of highway and local road driving.
This is a comfortable same-day trip.
The midpoint is about 3.1 miles from Blakeslee, NY. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $1.04 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
The drive from Blakeslee, NY to Sullivan, NY is easy. At 10m with 0% highway, most drivers will find it relaxed and low-stress.
This route does not have any notably tricky sections. Most of the drive from Blakeslee, NY to Sullivan, NY is straightforward, with well-signed roads and simple exits.
The route from Blakeslee, NY to Sullivan, NY does not surface many named destination signs beyond the main corridor.

Was this route helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Explore more options from Blakeslee, NY or browse trips ending in Sullivan, NY.

Looking for more statewide routes? Browse NY road trips.

Explore maps for Blakeslee, NY or Sullivan, NY on MapSof.net.