Trip from Bristol, PA to Darby, PA

Drive Time

51m

Distance

31.5 mi

51 km

Drive Score

7/10

Good drive

Same Day?

Yes, doable

Fuel Cost

$5

one way

EV Charging

Loading...

station data

Best Time to Leave

Save up to 13 min
4 AM
0h 47m ★
6 AM
0h 51m
8 AM
1h 0m
10 AM
0h 54m
12 PM
0h 53m
3 PM
0h 55m
5 PM
0h 59m
8 PM
0h 49m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

Downtown Bristol, PA, PA

Bristol, PA

Jay Brand

Downtown Darby, PA, PA

Darby, PA

Haneul Trac

Trip Overview

Traveling from Bristol to Darby covers a 31.5-mile span through the heart of Pennsylvania’s Northeast region. You can expect the journey to take roughly 51 minutes, making it an ideal candidate for a single-day trip that requires no overnight stops. Budgeting about $5 for fuel should cover your transit costs comfortably. Since the route is entirely contained within the state, you won't need to worry about regional transitions or cross-state logistics. It is a straightforward, highway-focused drive that prioritizes efficiency over leisure, perfect for commuters or those needing to reach their destination quickly. By keeping the trip to a single day, you retain maximum flexibility for your schedule.

Trip Pace

Same-day drive is realistic

A same-day return is realistic if you keep stops short.

Break Rhythm

0 planned breaks

A short stop every 2 to 3 hours is enough for this drive.

Midpoint

15.7 miles from Bristol, PA

A natural place for your longest stop of the day , about 25m into the drive .

Drive Character

This 31.5-mile route is heavily reliant on major thoroughfares, with approximately 71% of your time spent on highways. You will navigate using a combination of the Delaware Expressway, State Road, and Island Avenue to complete your transit. The Delaware Expressway serves as the backbone of the trip, hosting your longest uninterrupted stretch of 22.1 miles. Because this is a highway-focused drive, the experience behind the wheel is characterized by consistent speeds rather than winding backroads. Expect a functional, direct transition between these two points that favors quick movement over technical maneuvering.

Most of the miles stay on highways, which makes pacing and fuel planning easier than turn-by-turn city driving.
There are about 20 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
Delaware Expressway is the longest continuous segment at about 22.1 miles.

How Hard Is This Drive?

This is a straightforward highway drive that stays mostly on Delaware Expressway and State Road. You will hit about 14 points where you need to pay attention to lane position or signs. The trickiest moment comes early in the drive near Washington Street.

Route Complexity 6/10

Moderate - straightforward overall, but long enough or busy enough to require pacing

This drive requires moderate attention. Across 31.5 miles you will encounter 14 spots where lane choice or exit timing matters. Not difficult for experienced highway drivers, but worth previewing the tricky sections before you go.

Where does it get tricky?

The main spots that need attention: near the start (Washington Street): Navigation decision point; at 1.6 miles (PA 413 / New Rodgers Road): Lane positioning matters here; at 5 miles (Street Road): Lane positioning matters here.

Critical Maneuvers

5 of 14 key points

These are the spots where you need to pay the most attention. Preview them before you drive.

5
0 mi into trip | ~0m in | Washington Street

Turn right onto Washington Street

Navigation decision point

6
1.6 mi into trip | ~3m in | PA 413 / New Rodgers Road

Turn left onto PA 413 / New Rodgers Road

Lane positioning matters here

Use the left lane.
6
5 mi into trip | ~10m in | Street Road

Turn right onto Street Road

Lane positioning matters here

Use the right lane.
6
5.7 mi into trip | ~12m in

Turn left toward I 95 South: Central Philadelphia

Lane positioning matters here

Use the left lane. Toward I 95 South: Central Philadelphia
8
28 mi into trip | ~42m in

Take the exit toward Bartram Avenue, Essington Avenue

Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one

Use the slight right lane. Exit 14 Toward Bartram Avenue, Essington Avenue

Main Roads

Road Distance Duration
Delaware Expressway 22.1 mi 30m
State Road 3.3 mi 6m
Island Avenue 1.6 mi 3m
Bartram Avenue 0.8 mi 1m
Main Street 0.7 mi 2m
Street Road 0.6 mi 1m
Otter Street 0.6 mi <1m
Radcliffe Street 0.4 mi <1m
Longest stretch: Delaware Expressway — 22.1 mi, about 30m

Turn-by-Turn Driving Directions

Step-by-step road directions between Bristol, PA and Darby, PA.

1

Start on this road

158 ft · 13 sec · this road
2

Turn right onto Washington Street

0.2 mi · 50 sec · Washington Street
3

At end of road, turn right onto Radcliffe Street

0.4 mi · 45 sec · Radcliffe Street
4

Turn right onto Market Street

0.2 mi · 28 sec · Market Street
5

At end of road, turn left onto Old US Hwy 13

340 ft · 9 sec · Old US Hwy 13
6

Turn right onto Mill Street

229 ft · 4 sec · Mill Street
7

Continue on Otter Street

0.6 mi · 59 sec · Otter Street
8

Continue on Old US Hwy 13

450 ft · 18 sec · Old US Hwy 13
Use the none lane.
9

Turn left onto PA 413

519 ft · 6 sec · New Rodgers Road
Use the left lane.
10

Turn right onto State Road

3.3 mi · 6 min · State Road
Use the none lane.
11

Turn right onto Street Road

0.6 mi · 1 min · Street Road
Use the right lane.
12

Turn left

0.2 mi · 26 sec
Toward I 95 South: Central Philadelphia Use the left lane.
13

Merge onto I 95

22 mi · 30 min · Delaware Expressway
Use the none lane.
14

Take the exit

0.3 mi · 56 sec
Exit 14 Toward Bartram Avenue, Essington Avenue Use the slight right lane.
15

Continue on Bartram Avenue

0.8 mi · 1 min · Bartram Avenue
Use the straight / right lanes.
16

Turn right onto Island Avenue

1.6 mi · 3 min · Island Avenue
Use the right lane.
17

Turn left onto Woodland Avenue

222 ft · 7 sec · Woodland Avenue
18

Continue on Main Street

0.7 mi · 2 min · Main Street
19

Turn right onto Ridge Avenue

47 ft · 2 sec · Ridge Avenue
20

Arrive at destination

Ridge Avenue

Trip Plan

Given the 51-minute duration, you have plenty of flexibility regarding your departure time, though avoiding peak traffic hours on the Delaware Expressway is always a wise strategy. Because the trip is short and requires zero planned stops, you can easily complete the entire trek without needing a dedicated break. Keep an eye on your fuel gauge before you head out, as the estimated $5 cost is quite manageable for most vehicles. To make the most of your drive, familiarize yourself with the transition points between the Delaware Expressway and State Road before you leave to ensure a smooth transition through the various road types. This short distance means you can focus on a direct arrival without the fatigue associated with longer road trips.

Morning Departure

Leave by 9 AM and you'll arrive before lunch.

Evening Departure

Even a 4 PM departure gets you there before dark in summer.

You can normally do this drive in one day.
You may only need one short stretch break if traffic stays light.
The halfway point lands around 15.7 miles from Bristol, PA, or about 25m into the drive.
The longest continuous stretch on this route runs about 22.1 miles.

This is a comfortable same-day trip.

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 31.5 miles or 51m in

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 15.7 miles or 25m in

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Final hour starts around 40m

Traffic, exits, and arrival timing usually matter more near Darby, PA than in the middle of the route.

Before You Leave

+

Open the route before leaving Bristol, PA so your first major turns are already loaded.

+

Leave with enough water and a charging cable within reach, not packed away.

+

Check your fuel range against the first long segment, especially if you are starting outside city service areas.

Day 1

Settle into the route from Bristol, PA

This is one driving day of about 31.5 miles and 51m.

Your first comfortable stop window is around 80 miles from Bristol, PA.
This route can stay practical as a one-day drive if traffic stays reasonable.
You may only need one short stretch stop if conditions stay smooth.
The longest stretch is on Delaware Expressway for about 22.1 miles.

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 15.7 mi from Bristol, PA · 25m into the drive

Mid-route town

Meal stop

Staten Island, NY

16 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Pacing Suggestions

Staten Island, NY

Fuel and coffee

A short stop after about 31.5 miles helps settle the day before fatigue starts building.

Staten Island, NY

Meal break

The midpoint is around 15.7 miles from Bristol, PA, which is a good place for a longer meal and fuel stop.

Arriving in Darby, PA

The final approach into Darby, PA usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Darby, PA.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Regular Gas

$5.21 one way

$10.42 round trip

$4.20/gal 25.4 MPG avg 11 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.60 $5.70 $11.41
premium $4.92 $6.10 $12.21
diesel $5.64 $7.00 $14.00

No toll roads detected on this route.

Estimated Trip Cost (one way, 1 person)

Fuel

$5

Meals

$25–$50

Total

$30–$55

Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.

Estimated CO2 emission: 11 kg one way. Prices: EIA weekly data, 2026-04-06.

Driving Electric?

About $3 in charging · 0 stops · 64% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 9.5 0 $3.31 $1.51
Efficient EV 7.9 0 $2.76 $1.26
EV Truck/SUV 12.6 0 $4.41 $2.02

Gas CO2

11 kg

EV CO2

4 kg (64% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast data refreshed 3 days ago

Origin

Bristol, PA

Evening in Bristol on Sunday

Local time

8:29 PM

EDT

Current temp

63°F

Unavailable

Live forecast

Destination

Darby, PA

Evening in Darby on Sunday

Local time

8:29 PM

EDT

Current temp

65°F

Unavailable

Live forecast

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.

Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.

Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

2 degrees warmer at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

51m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Bristol, PA to Darby, PA covers 31.5 miles and takes about 51m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are Delaware Expressway, State Road, Island Avenue. Most of the drive stays on highways, so watch for ramps and exits.
This is a comfortable same-day trip.
The midpoint is about 15.7 miles from Bristol, PA. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $5.21 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
This drive requires moderate attention. Across 31.5 miles you will encounter 14 spots where lane choice or exit timing matters. Not difficult for experienced highway drivers, but worth previewing the tricky sections before you go.
The main spots that need attention: near the start (Washington Street): Navigation decision point; at 1.6 miles (PA 413 / New Rodgers Road): Lane positioning matters here; at 5 miles (Street Road): Lane positioning matters here.
The route from Bristol, PA to Darby, PA does not surface many named destination signs beyond the main corridor.

Was this route helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Explore more options from Bristol, PA or browse trips ending in Darby, PA.

Looking for more statewide routes? Browse PA road trips.

Explore maps for Bristol, PA or Darby, PA on MapSof.net.