Trip from Bryans Road, MD to Gwynn Oak, MD

Drive Time

1h 34m

Distance

59.4 mi

96 km

Drive Score

9/10

Great drive

Same Day?

Yes, doable

Fuel Cost

$10

one way

EV Charging

Loading...

station data

Best Time to Leave

Save up to 22 min
4 AM
1h 27m ★
6 AM
1h 34m
8 AM
1h 49m
10 AM
1h 39m
12 PM
1h 38m
3 PM
1h 40m
5 PM
1h 48m
8 PM
1h 30m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

Downtown Bryans Road, MD, MD

Bryans Road, MD

MINEIA MARTINS

Downtown Gwynn Oak, MD, MD

Gwynn Oak, MD

Iqbal farooz

Trip Overview

Spanning 59.4 miles, this journey from Bryans Road to Gwynn Oak is a straightforward trek across Maryland that typically takes 1 hour and 34 minutes. Because the total travel time is relatively short, you can easily complete this trip in a single day without needing an overnight stay. Expect to spend approximately $10 on fuel, making this an economical excursion within the Northeast region. You will navigate a mix of road types, transitioning from local corridors to major arterial highways. It is a practical route for commuters or travelers looking to bridge the gap between these two Maryland communities efficiently.

Trip Pace

Same-day drive is realistic

A same-day return is realistic if you keep stops short.

Break Rhythm

0 planned breaks

A short stop every 2 to 3 hours is enough for this drive.

Midpoint

29.7 miles from Bryans Road, MD

A natural place for your longest stop of the day , about 46m into the drive .

Drive Character

This trip offers a mixed driving profile, balancing local roads with significant highway stretches. You will spend about 54% of your time on highways, utilizing the Indian Head Highway, the Anacostia Freeway, and the Baltimore-Washington Parkway. Your longest uninterrupted segment occurs on the Baltimore-Washington Parkway, where you will cover 23.7 miles of steady driving. The character of the road shifts from the quieter, local feel of Bryans Road toward the faster-paced, high-traffic environment of the D.C. and Baltimore metro corridors. Be prepared for the transition as the route opens up into the more substantial highway portions of your journey.

Expect a mix of faster highway mileage and slower local approaches near the beginning or end.
There are about 20 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
Baltimore-Washington Parkway is the longest continuous segment at about 23.7 miles.

How Hard Is This Drive?

This route mixes highway mileage with some local-road sections near the start or finish. This route has several spots where lane changes, forks, or exits need your full attention. The trickiest moment comes early in the drive near MD 210 / Indian Head Highway.

Route Complexity 10/10

High effort - long or complex enough to need steady focus all day

This is a demanding drive. With 12 significant decision points across 59.4 miles, you will need to stay alert — especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.

Where does it get tricky?

The main spots that need attention: near the start (MD 210 / Indian Head Highway): Sharp turn - reduce speed on approach. Lane positioning matters here; at 16.8 miles: Highway fork - watch signs carefully; at 19.1 miles (DC 295 / Anacostia Freeway): Highway fork - watch signs carefully. Lane positioning matters here.

Critical Maneuvers

5 of 12 key points

These are the spots where you need to pay the most attention. Preview them before you drive.

7
0 mi into trip | ~0m in | MD 210 / Indian Head Highway

Turn sharp left onto MD 210 / Indian Head Highway

Sharp turn - reduce speed on approach. Lane positioning matters here

Use the none lane.
6
16.8 mi into trip | ~26m in

Keep slight left at fork toward I 295 North

Highway fork - watch signs carefully

Toward I 295 North
7
19.1 mi into trip | ~30m in | DC 295 / Anacostia Freeway

Keep slight right at fork onto DC 295 / Anacostia Freeway toward DC 295 North

Highway fork - watch signs carefully. Lane positioning matters here

Use the straight / slight left / none lanes. Toward DC 295 North
7
24.2 mi into trip | ~38m in

Keep slight left at fork toward Baltimore

Highway fork - watch signs carefully. Lane positioning matters here

Use the slight left lane. Toward Baltimore
8
52.3 mi into trip | ~1h 16m in | MD 166

Keep slight right at fork onto MD 166 toward MD 166: Catonsville, Community College of Baltimore County

Highway fork - watch signs carefully. Lane positioning matters here. Multiple destination signs - pick the right one

Use the slight right lane. Toward MD 166: Catonsville, Community College o...

Towns Along This Route

Between Bryans Road, MD and Gwynn Oak, MD, road signs point toward Dhs, Baltimore and Community College Of Baltimore County.

Dhs

16.7 mi in | ~26m

Baltimore

24.2 mi in | ~38m

Community College Of Baltimore County

52.3 mi in | ~1h 16m | via MD 166

Main Roads

Road Distance Duration
Baltimore-Washington Parkway 23.7 mi 32m
Indian Head Highway 15.5 mi 23m
Anacostia Freeway 4.9 mi 8m
Metropolitan Boulevard 3.7 mi 4m
Ingleside Avenue 2.7 mi 5m
Kenilworth Avenue Freeway 2.3 mi 3m
North Forest Park Avenue 1.4 mi 3m
South Capitol Street 1.2 mi 3m
Longest stretch: Baltimore-Washington Parkway — 23.7 mi, about 32m

Turn-by-Turn Driving Directions

Step-by-step road directions between Bryans Road, MD and Gwynn Oak, MD.

1

Start on MD 227

20 ft · 9 sec · Livingston Road
2

Turn sharp left onto MD 210

15 mi · 23 min · Indian Head Highway
Use the none lane.
3

Continue on South Capitol Street

1.2 mi · 3 min · South Capitol Street
4

Turn slight right

0.1 mi · 18 sec
Toward I 295 North: Malcolm X Avenue, Dorothea Dix Avenue, DHS Use the straight / slight right lanes.
5

Keep slight left at fork

0.2 mi · 24 sec
Toward I 295 North
6

Merge onto I 295

2.2 mi · 3 min · Anacostia Freeway
Use the none lane.
7

Keep slight right at fork onto DC 295

2.7 mi · 4 min · Anacostia Freeway
Toward DC 295 North Use the straight / slight left / none lanes.
8

Continue on DC 295

2.3 mi · 3 min · Kenilworth Avenue Freeway
Use the straight / slight left / none lanes.
9

Keep slight left at fork

0.4 mi · 24 sec
Toward Baltimore Use the slight left lane.
10

Merge onto Baltimore-Washington Parkway

24 mi · 32 min · Baltimore-Washington Parkway
Use the none lane.
11

Take the exit

0.3 mi · 37 sec
Toward I 195 West: Catonsville Use the slight right lane.
12

Merge onto I 195

3.7 mi · 4 min · Metropolitan Boulevard
Use the none lane.
13

Keep slight right at fork onto MD 166

1.1 mi · 2 min · MD 166
Toward MD 166: Catonsville, Community College of Baltimore County Use the slight right lane.
14

Turn right onto Bloomsbury Avenue

1.0 mi · 2 min · Bloomsbury Avenue
15

Continue on Ingleside Avenue

2.7 mi · 5 min · Ingleside Avenue
Use the straight lane.
16

Continue on North Forest Park Avenue

1.4 mi · 3 min · North Forest Park Avenue
Use the left / straight lanes.
17

Turn slight left onto Hillsdale Road

0.9 mi · 2 min · Hillsdale Road
18

Turn right onto Haddon Avenue

178 ft · 11 sec · Haddon Avenue
19

Turn left

60 ft · 4 sec
20

Arrive at destination

Trip Plan

Since this is a 1-day trip with no mandatory stops, you have the flexibility to plan your departure around your personal schedule. Keep in mind that the route relies heavily on major parkways and freeways, so checking real-time traffic reports before you leave is a smart way to avoid potential congestion on the 59.4-mile trek. Because the fuel cost is modest at roughly $10, you likely won't need to worry about mid-trip refueling, but it never hurts to check your gauge before hitting the Indian Head Highway. Use the lack of scheduled stops to your advantage by maintaining a steady pace, allowing you to reach Gwynn Oak comfortably within the estimated 1 hour and 34 minutes.

Morning Departure

Leave by 9 AM and you'll arrive before lunch.

Evening Departure

Even a 4 PM departure gets you there before dark in summer.

You can normally do this drive in one day.
You may only need one short stretch break if traffic stays light.
The halfway point lands around 29.7 miles from Bryans Road, MD, or about 46m into the drive.
The longest continuous stretch on this route runs about 23.7 miles.

This is a comfortable same-day trip.

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 59.4 miles or 1h 34m in

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 29.7 miles or 46m in

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Final hour starts around 1h 14m

Traffic, exits, and arrival timing usually matter more near Gwynn Oak, MD than in the middle of the route.

Before You Leave

+

Open the route before leaving Bryans Road, MD so your first major turns are already loaded.

+

Leave with enough water and a charging cable within reach, not packed away.

+

Check your fuel range against the first long segment, especially if you are starting outside city service areas.

Day 1

Settle into the route from Bryans Road, MD

This is one driving day of about 59.4 miles and 1h 34m.

Your first comfortable stop window is around 80 miles from Bryans Road, MD.
This route can stay practical as a one-day drive if traffic stays reasonable.
You may only need one short stretch stop if conditions stay smooth.
The longest stretch is on Baltimore-Washington Parkway for about 23.7 miles.

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 29.7 mi from Bryans Road, MD · 46m into the drive

Mid-route town

Meal stop

Staten Island, NY

30 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Pacing Suggestions

Staten Island, NY

Fuel and coffee

A short stop after about 59.4 miles helps settle the day before fatigue starts building.

Staten Island, NY

Meal break

The midpoint is around 29.7 miles from Bryans Road, MD, which is a good place for a longer meal and fuel stop.

Arriving in Gwynn Oak, MD

The final approach into Gwynn Oak, MD usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Gwynn Oak, MD.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Regular Gas

$9.83 one way

$19.66 round trip

$4.20/gal 25.4 MPG avg 21 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.60 $10.76 $21.51
premium $4.92 $11.51 $23.02
diesel $5.64 $13.20 $26.39

No toll roads detected on this route.

Estimated Trip Cost (one way, 1 person)

Fuel

$10

Meals

$25–$50

Total

$35–$60

Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.

Estimated CO2 emission: 20.8 kg one way. Prices: EIA weekly data, 2026-04-06.

Driving Electric?

About $6 in charging · 0 stops · 67% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 17.8 0 $6.24 $2.85
Efficient EV 14.9 0 $5.20 $2.38
EV Truck/SUV 23.8 0 $8.32 $3.80

Gas CO2

21 kg

EV CO2

7 kg (67% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast data refreshed 12 hours ago

Origin

Bryans Road, MD

Night in Bryans Road on Sunday

Local time

9:04 PM

EDT

Current temp

63°F

Unavailable

Live forecast

Destination

Gwynn Oak, MD

Night in Gwynn Oak on Sunday

Local time

9:04 PM

EDT

Current temp

84°F

Unavailable

Live forecast

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.

Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.

Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

21 degrees warmer at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

1h 34m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Bryans Road, MD to Gwynn Oak, MD covers 59.4 miles and takes about 1h 34m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are Baltimore-Washington Parkway, Indian Head Highway, Anacostia Freeway. Expect a mix of highway and local road driving.
This is a comfortable same-day trip.
The midpoint is about 29.7 miles from Bryans Road, MD. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $9.83 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
This is a demanding drive. With 12 significant decision points across 59.4 miles, you will need to stay alert — especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.
The main spots that need attention: near the start (MD 210 / Indian Head Highway): Sharp turn - reduce speed on approach. Lane positioning matters here; at 16.8 miles: Highway fork - watch signs carefully; at 19.1 miles (DC 295 / Anacostia Freeway): Highway fork - watch signs carefully. Lane positioning matters here.
Between Bryans Road, MD and Gwynn Oak, MD, road signs point toward Dhs, Baltimore and Community College Of Baltimore County.

Was this route helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Return Trip

Gwynn Oak, MD to Bryans Road, MD

Plan the drive back the other way.

60.5 mi 1h 34m

Explore more options from Bryans Road, MD or browse trips ending in Gwynn Oak, MD.

Looking for more statewide routes? Browse MD road trips.

Explore maps for Bryans Road, MD or Gwynn Oak, MD on MapSof.net.