Trip from Campbellsville, KY to Georgetown, KY

Drive Time

3h 51m

Distance

188 mi

303 km

Drive Score

9/10

Great drive

Same Day?

Yes, doable

Fuel Cost

$29

one way

Best Time to Leave

Save up to 38 min
4 AM
3h 39m ★
6 AM
3h 52m
8 AM
4h 17m
10 AM
4h 1m
12 PM
3h 58m
3 PM
4h 2m
5 PM
4h 16m
8 PM
3h 44m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

Downtown Campbellsville, KY, KY

Campbellsville, KY

Vietnam Hidden Light

Downtown Georgetown, KY, KY

Georgetown, KY

Vietnam Hidden Light

Trip Overview

If you are planning a trip from Campbellsville to Georgetown, expect a 188-mile journey that typically takes about 3 hours and 51 minutes of driving time. This route is designed as a straightforward, single-day excursion, making it an efficient way to transit across this part of Kentucky. Budget roughly $29 for fuel to cover the distance, which remains consistent across the Southeast region. Because the trip is manageable in a single stint, you won't need to worry about booking an overnight stay unless you prefer a slower pace. It is a highly practical connection for those looking to get from point A to point B without unnecessary detours.

Trip Pace

Same-day drive is realistic

A same-day return is realistic if you keep stops short.

Break Rhythm

1 planned break

A short stop every 2 to 3 hours is enough for this drive.

Midpoint

94 miles from Campbellsville, KY

A natural place for your longest stop of the day , about 1h 48m into the drive .

Drive Character

Expect a highway-focused experience, as roughly 71% of your travel time will be spent on major routes like the Cumberland Parkway, KY 80, and the Cumberland Gap Parkway. You will settle into a steady rhythm behind the wheel, with your longest uninterrupted stretch covering 36.7 miles on the Cumberland Parkway. The road maintains a consistent, efficient personality throughout the drive rather than shifting into technical or winding local paths. You will find that the transitions between these main parkways are fluid, allowing you to maintain a reliable speed for the majority of the nearly four-hour duration.

Most of the miles stay on highways, which makes pacing and fuel planning easier than turn-by-turn city driving.
There are about 27 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
Cumberland Parkway is the longest continuous segment at about 36.7 miles.

How Hard Is This Drive?

This is a straightforward highway drive that stays mostly on Cumberland Parkway and KY 80. There are only a few real navigation decisions along the way. The trickiest moment comes around 19.1 miles in near KY 55 Business; KY 80 / Jamestown Road.

Route Complexity 4/10

Easy - simple navigation with a manageable amount of wheel time

This is a straightforward 3h 51m drive. You will face about 14 decision points, but nothing that requires special attention if you follow navigation.

Where does it get tricky?

The main spots that need attention: at 19.1 miles (KY 55 Business; KY 80 / Jamestown Road): Roundabout - know your exit number before entering; at 20.3 miles: Navigation decision point; at 57.4 miles: Exit ramp - move to the correct lane early. Multiple destination signs - pick the right one.

Critical Maneuvers

5 of 14 key points

These are the spots where you need to pay the most attention. Preview them before you drive.

5
19.1 mi into trip | ~22m in | KY 55 Business; KY 80 / Jamestown Road

Enter roundabout onto KY 55 Business; KY 80 / Jamestown Road

Roundabout - know your exit number before entering

5
20.3 mi into trip | ~24m in

Take the ramp toward KY 55: Columbia

Navigation decision point

Exit 49 Toward KY 55: Columbia
6
57.4 mi into trip | ~1h 4m in

Take the exit toward KY 914: Somerset, Burnside

Exit ramp - move to the correct lane early. Multiple destination signs - pick the right one

Exit 86 Toward KY 914: Somerset, Burnside
5
103.5 mi into trip | ~1h 59m in

Take the exit toward US 25, US 25E: Corbin, Barbourville

Exit ramp - move to the correct lane early. Multiple destination signs - pick the right one

Toward US 25, US 25E: Corbin, Barbourville
5
168.5 mi into trip | ~3h 17m in | KY 38

Enter roundabout onto KY 38

Roundabout - know your exit number before entering

Towns Along This Route

Between Campbellsville, KY and Georgetown, KY, road signs point toward Burnside and Barbourville.

Burnside

57.4 mi in | ~1h 4m

Barbourville

103.5 mi in | ~1h 59m

Main Roads

Road Distance Duration
Cumberland Parkway 36.7 mi 39m
KY 80 33.8 mi 40m
Cumberland Gap Parkway 30.7 mi 36m
KY 38 19.7 mi 34m
Harlan Road 15.9 mi 18m
Pineville Road 13.1 mi 14m
I 75 11.3 mi 12m
New Columbia Road 10.3 mi 11m
Longest stretch: Cumberland Parkway — 36.7 mi, about 39m

Turn-by-Turn Driving Directions

Step-by-step road directions between Campbellsville, KY and Georgetown, KY.

1

Start on US 68

0.3 mi · 23 sec · East Broadway Street
2

Continue on US 68; KY 55; KY 70

0.3 mi · 21 sec · West Broadway
3

Continue on US 68; KY 55; KY 70

0.5 mi · 44 sec · Greensburg Road
4

Turn left onto KY 210

10 mi · 11 min · New Columbia Road
5

Continue on KY 55

7.3 mi · 8 min · Campbellsville Road
6

Continue on KY 55 Business

0.5 mi · 43 sec · Campbellsville Street
7

Enter roundabout onto KY 55 Business; KY 80

276 ft · 4 sec · Jamestown Road
8

Continue on KY 55 Business; KY 80

81 ft · 1 sec · Jamestown Road
9

Turn slight right onto KY 55 Business; KY 80

1.2 mi · 1 min · Jamestown Street
10

Take the ramp

0.3 mi · 38 sec
Exit 49 Toward KY 55: Columbia
11

Merge onto Cumberland Parkway

37 mi · 39 min · Cumberland Parkway
12

Take the exit

0.3 mi · 32 sec
Exit 86 Toward KY 914: Somerset, Burnside
13

Continue on KY 914

0.4 mi · 33 sec · KY 914
14

Turn left onto KY 80

34 mi · 40 min · KY 80
Use the left lane.
15

Take the exit

0.3 mi · 43 sec
16

Merge onto I 75

11 mi · 12 min · I 75
17

Take the exit

0.3 mi · 37 sec
Toward US 25, US 25E: Corbin, Barbourville
18

Turn left onto US 25E

2.0 mi · 3 min · Corbin Bypass
19

Continue on US 25E

31 mi · 36 min · Cumberland Gap Parkway
20

Continue on US 25E

1.8 mi · 2 min · Bob Madon Bypass
21

Turn left onto US 119

16 mi · 18 min · Harlan Road
22

Continue on US 119

13 mi · 14 min · Pineville Road
23

Turn right onto US 421

1.1 mi · 2 min · US 421
24

Turn left onto KY 38

386 ft · 9 sec · KY 38
25

Enter roundabout onto KY 38

91 ft · 1 sec · KY 38
26

Continue on KY 38

20 mi · 34 min · KY 38
27

Arrive at destination

KY 38

Trip Plan

Since this is a one-day drive, you have plenty of flexibility regarding your departure time, though hitting the road early helps avoid any unexpected regional traffic. Plan for at least one dedicated stop to stretch your legs and refresh, as the nearly four-hour duration can be taxing if you push through without a break. Keep an eye on your fuel gauge during the longer segments, particularly when navigating the 36.7-mile stretch on the Cumberland Parkway, to ensure you don't run low between service intervals. Because the total fuel cost is estimated at $29, filling up before you leave Campbellsville is a smart way to simplify your travel expenses. Use the single recommended stop to break up the drive into more manageable, shorter segments.

Morning Departure

An early start around 7-8 AM gets you there with plenty of daylight left.

Evening Departure

A late afternoon start means arriving after dark. Morning is better.

You can normally do this drive in one day.
Plan roughly 1 meaningful break for fuel, food, and rest.
The halfway point lands around 94 miles from Campbellsville, KY, or about 1h 48m into the drive.
The longest continuous stretch on this route runs about 36.7 miles.

This is a comfortable same-day trip.

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 80 miles or 1h 32m in

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 94 miles or 1h 48m in

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Final hour starts around 3h

Traffic, exits, and arrival timing usually matter more near Georgetown, KY than in the middle of the route.

Before You Leave

+

Open the route before leaving Campbellsville, KY so your first major turns are already loaded.

+

Leave with enough water and a charging cable within reach, not packed away.

+

Check your fuel range against the first long segment, especially if you are starting outside city service areas.

Day 1

Settle into the route from Campbellsville, KY

This is one driving day of about 188 miles and 3h 51m.

Your first comfortable stop window is around 80 miles from Campbellsville, KY.
This route can stay practical as a one-day drive if traffic stays reasonable.
Plan about 1 real break rather than only quick fuel stops.
The longest stretch is on Cumberland Parkway for about 36.7 miles.

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 94 mi from Campbellsville, KY · 1h 48m into the drive

Downtown Knoxville, TN, TN

Mid-route town

Meal stop

Knoxville, TN

94 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Pacing Suggestions

Nicholasville, KY

Fuel and coffee

A short stop after about 80 miles helps settle the day before fatigue starts building.

Nicholasville, KY

Meal break

The midpoint is around 94 miles from Campbellsville, KY, which is a good place for a longer meal and fuel stop.

Arriving in Georgetown, KY

The final approach into Georgetown, KY usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Georgetown, KY.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Regular Gas

$28.56 one way

$57.11 round trip

$3.86/gal 25.4 MPG avg 66 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.25 $31.48 $62.96
premium $4.80 $35.49 $70.98
diesel $5.64 $41.77 $83.53

No toll roads detected on this route.

Estimated Trip Cost (one way, 1 person)

Fuel

$29

Meals

$25–$50

Total

$54–$79

Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.

Estimated CO2 emission: 65.8 kg one way. Prices: EIA weekly data, 2026-04-06.

Driving Electric?

About $20 in charging · 0 stops · 67% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 56.4 0 $19.74 $9.02
Efficient EV 47 0 $16.45 $7.52
EV Truck/SUV 75.2 0 $26.32 $12.03

Gas CO2

66 kg

EV CO2

22 kg (67% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast data refreshed 2 days ago

Origin

Campbellsville, KY

Afternoon in Campbellsville on Sunday

Local time

3:46 PM

EDT

Current temp

63°F

Unavailable

Live forecast

Destination

Georgetown, KY

Afternoon in Georgetown on Sunday

Local time

3:46 PM

EDT

Current temp

78°F

Unavailable

Live forecast

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.

Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.

Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

15 degrees warmer at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

3h 51m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Campbellsville, KY to Georgetown, KY covers 188 miles and takes about 3h 51m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are Cumberland Parkway, KY 80, Cumberland Gap Parkway. Most of the drive stays on highways, so watch for ramps and exits.
This is a comfortable same-day trip.
The midpoint is about 94 miles from Campbellsville, KY. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $28.56 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
An early start around 7-8 AM gets you there with plenty of daylight left. A late afternoon start means arriving after dark. Morning is better.
Plan about 1 meaningful break for fuel, food, or rest. A short stop every 2 to 3 hours is enough for this drive.
This is a straightforward 3h 51m drive. You will face about 14 decision points, but nothing that requires special attention if you follow navigation.
The main spots that need attention: at 19.1 miles (KY 55 Business; KY 80 / Jamestown Road): Roundabout - know your exit number before entering; at 20.3 miles: Navigation decision point; at 57.4 miles: Exit ramp - move to the correct lane early. Multiple destination signs - pick the right one.
Between Campbellsville, KY and Georgetown, KY, road signs point toward Burnside and Barbourville.

Was this route helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Return Trip

Georgetown, KY to Campbellsville, KY

Plan the drive back the other way.

189 mi 3h 53m

Explore more options from Campbellsville, KY or browse trips ending in Georgetown, KY.

Looking for more statewide routes? Browse KY road trips.

Explore maps for Campbellsville, KY or Georgetown, KY on MapSof.net.