Origin
Cascade, MI
Night in Cascade on Wednesday
Local time
10:24 PM
EDT
Current temp
57°F
Unavailable
Live forecast
Trip from Cascade, MI to Beverly Hills, MI
Last recalculated Apr 16, 2026
Drive Time
23m
Distance
10.9 mi
17 km
Drive Score
6/10
Good drive
Same Day?
Yes, doable
Fuel Cost
$2
one way
Best Time to Leave
4 AM
0h 21m
★
6 AM
0h 23m
8 AM
0h 28m
10 AM
0h 25m
12 PM
0h 24m
3 PM
0h 25m
5 PM
0h 27m
8 PM
0h 22m
Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.
Cascade, MI
Lorenza Magnaghi
Beverly Hills, MI
Simon Steiner
Trip Overview
The drive from Cascade, MI to Beverly Hills, MI covers 10.9 miles and takes about 23m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.
The route leans on County Road 480, County Road NC, County Road NG for much of the mileage, and the overall profile is turn-heavy local drive. The longest uninterrupted segment is about 7.2 miles on County Road 480. At current regular gas prices, budget about $1.70 one way before food or hotel costs.
Trip Pace
Same-day drive is realistic
A same-day return is realistic if you keep stops short.
Break Rhythm
0 planned breaks
This drive is short enough that no stops are needed.
Midpoint
5.4 miles from Cascade, MI
A natural place for your longest stop of the day , about 14m into the drive .
Drive Character
Expect a 23m drive with frequent turns across 10.9 miles of local and secondary roads.
This route has more turning and local-road decision points than a simple highway run.
There are about 10 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
County Road 480 is the longest continuous segment at about 7.2 miles.
How Hard Is This Drive?
Expect a hands-on drive with frequent turns and local roads rather than long highway stretches. There are only a few real navigation decisions along the way. The trickiest moment comes around 2.5 miles in near CR 480 / County Road 480.
Route Complexity
3/10
Easy - simple navigation with a manageable amount of wheel time
This is a straightforward 23m drive. You will face about 5 decision points, but nothing that requires special attention if you follow navigation.
Where does it get tricky?
The main spots that need attention: at 2.5 miles (CR 480 / County Road 480): Navigation decision point; at 9.7 miles (South Healy Avenue): Navigation decision point; at 9.9 miles (East Main Street): Navigation decision point.
Critical Maneuvers
5 of 5 key pointsThese are the spots where you need to pay the most attention. Preview them before you drive.
3
2.5 mi into trip
|
~9m in
|
CR 480 / County Road 480
Turn left onto CR 480 / County Road 480
Navigation decision point
3
9.7 mi into trip
|
~20m in
|
South Healy Avenue
Turn right onto South Healy Avenue
Navigation decision point
4
9.9 mi into trip
|
~21m in
|
East Main Street
Turn left onto East Main Street
Navigation decision point
4
10 mi into trip
|
~21m in
|
Brown Avenue
Turn right onto Brown Avenue
Navigation decision point
4
10.9 mi into trip
|
~23m in
|
Maas Street
Turn right onto Maas Street
Navigation decision point
Main Roads
| Road | Distance | Duration |
|---|---|---|
| County Road 480 | 7.2 mi | 10m |
| County Road NC | 0.8 mi | 2m |
| County Road NG | 0.7 mi | 2m |
| Baldwin Avenue | 0.6 mi | 1m |
| Brown Avenue | 0.3 mi | <1m |
| South Healy Avenue | 0.1 mi | <1m |
| East Main Street | <0.1 mi | <1m |
| Maas Street | <0.1 mi | <1m |
Longest stretch:
County Road 480
— 7.2 mi, about 10m
Turn-by-Turn Driving Directions
Step-by-step road directions between Cascade, MI and Beverly Hills, MI.
1
Start on this road
1.0 mi
·
3 min
·
this road
2
Continue on County Road NC
0.8 mi
·
2 min
·
County Road NC
3
Continue on County Road NG
0.7 mi
·
2 min
·
County Road NG
4
Turn left onto CR 480
7.2 mi
·
10 min
·
County Road 480
5
Turn right onto South Healy Avenue
0.1 mi
·
26 sec
·
South Healy Avenue
6
Turn left onto East Main Street
422 ft
·
13 sec
·
East Main Street
7
Turn right onto Brown Avenue
0.3 mi
·
37 sec
·
Brown Avenue
8
Continue on Baldwin Avenue
0.6 mi
·
1 min
·
Baldwin Avenue
9
Turn right onto Maas Street
47 ft
·
1 sec
·
Maas Street
10
Arrive at destination
Maas Street
Trip Plan
Morning Departure
Leave by 9 AM and you'll arrive before lunch.
Evening Departure
Even a 4 PM departure gets you there before dark in summer.
You can normally do this drive in one day.
You may only need one short stretch break if traffic stays light.
The halfway point lands around 5.4 miles from Cascade, MI, or about 14m into the drive.
The longest continuous stretch on this route runs about 7.2 miles.
This is a comfortable same-day trip.
Departure
Before you leave
Start with fuel, water, and navigation already sorted so the first hour feels easy.
First stop
Around 10.9 miles or 23m in
Use this first pause for coffee, a restroom break, and a quick traffic check ahead.
Halfway reset
Around 5.4 miles or 14m in
This is the best place for your longest stop, a real meal, and a full fuel check.
Final approach
Final hour starts around 19m
Traffic, exits, and arrival timing usually matter more near Beverly Hills, MI than in the middle of the route.
Before You Leave
+
Have your navigation ready before leaving Cascade, MI.
Day 1
Settle into the route from Cascade, MI
This is one driving day of about 10.9 miles and 23m.
At 10.9 miles this is a quick drive — no planned stops needed.
The longest stretch is on County Road 480 for about 7.2 miles.
Where to Stop
Rest stops, refuel points, and overnight suggestions along this route.
Halfway Point
Midpoint
About 5.4 mi from Cascade, MI · 14m into the drive
Pacing Suggestions
Fuel and coffee
A short stop after about 10.9 miles helps settle the day before fatigue starts building.
Meal break
The midpoint is around 5.4 miles from Cascade, MI, which is a good place for a longer meal and fuel stop.
Arriving in Beverly Hills, MI
Allow a few extra minutes for the final approach into Beverly Hills, MI if you are unfamiliar with the area.
These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.
Fuel & Cost
Regular Gas
$1.70 one way
$3.41 round trip
$3.97/gal
25.4 MPG avg
4 kg CO2
| Fuel Type | $/gal | One Way | Round Trip |
|---|---|---|---|
| midgrade | $4.36 | $1.87 | $3.74 |
| premium | $4.89 | $2.10 | $4.20 |
| diesel | $5.61 | $2.41 | $4.81 |
No toll roads detected on this route.
Estimated Trip Cost (one way, 1 person)
Fuel
$2
Meals
$25–$50
Total
$27–$52
Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.
Estimated CO2 emission: 3.8 kg one way. Prices: EIA weekly data, 2026-04-13.
Driving Electric?
About $1 in charging · 0 stops · 75% less CO2
| Vehicle Type | kWh | Stops | DC Fast | Home Charge |
|---|---|---|---|---|
| Average EV | 3.3 | 0 | $1.14 | $0.52 |
| Efficient EV | 2.7 | 0 | $0.95 | $0.44 |
| EV Truck/SUV | 4.4 | 0 | $1.53 | $0.70 |
Gas CO2
4 kg
EV CO2
1 kg (75% less)
This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.
DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.
Travel Intel
Current conditions at both ends of the drive.
Destination
Beverly Hills, MI
Night in Beverly Hills on Wednesday
Local time
10:24 PM
EDT
Current temp
36°F
Unavailable
Live forecast
Time zone
Same local time
Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.
Temperature spread
21 degrees cooler at arrival
A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.
Road read
23m on the road
Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.
Weather data from the National Weather Service. Conditions may change; check closer to your travel date.
Frequently Asked Questions
The drive from Cascade, MI to Beverly Hills, MI covers 10.9 miles and takes about 23m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are County Road 480, County Road NC, County Road NG. Expect a mix of highway and local road driving.
This is a comfortable same-day trip.
The midpoint is about 5.4 miles from Cascade, MI. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $1.70 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
This is a straightforward 23m drive. You will face about 5 decision points, but nothing that requires special attention if you follow navigation.
The main spots that need attention: at 2.5 miles (CR 480 / County Road 480): Navigation decision point; at 9.7 miles (South Healy Avenue): Navigation decision point; at 9.9 miles (East Main Street): Navigation decision point.
The route from Cascade, MI to Beverly Hills, MI does not surface many named destination signs beyond the main corridor.
Was this route helpful?
Thanks for your feedback!
Your tip has been submitted. Thanks!
/500
Recent Tips
·