Origin
City of Baltimore, MD
Afternoon in City of Baltimore on Tuesday
Local time
2:44 PM
EDT
Current temp
85°F
Unavailable
Live forecast
Trip from City of Baltimore, MD to Bennsville, MD
Data updated 0 seconds ago
Drive Time
1h 29m
Distance
59.3 mi
95 km
Drive Score
9/10
Great drive
Same Day?
Yes, doable
Fuel Cost
$10
one way
EV Charging
Loading...
station data
Best Time to Leave
4 AM
1h 22m
★
6 AM
1h 29m
8 AM
1h 43m
10 AM
1h 34m
12 PM
1h 33m
3 PM
1h 35m
5 PM
1h 42m
8 PM
1h 25m
Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.
City of Baltimore, MD
Wikimedia Commons
Bennsville, MD
Jonathan Borba
Trip Overview
The drive from City of Baltimore, MD to Bennsville, MD covers 59.3 miles and takes about 1h 29m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.
The route leans on Baltimore-Washington Parkway, Indian Head Highway, Anacostia Freeway for much of the mileage, and the overall profile is highway-focused drive. The longest uninterrupted segment is about 30.1 miles on Baltimore-Washington Parkway. At current regular gas prices, budget about $9.83 one way before food or hotel costs.
Trip Pace
Same-day drive is realistic
A same-day return is realistic if you keep stops short.
Break Rhythm
0 planned breaks
A short stop every 2 to 3 hours is enough for this drive.
Midpoint
29.7 miles from City of Baltimore, MD
A natural place for your longest stop of the day , about 42m into the drive .
Loading map...
Drive Character
This is a 1h 29m highway drive covering 59.3 miles, with most of the trip on Baltimore-Washington Parkway and Indian Head Highway. The longest continuous stretch is about 30.1 miles on Baltimore-Washington Parkway.
Most of the miles stay on highways, which makes pacing and fuel planning easier than turn-by-turn city driving.
There are about 15 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
Baltimore-Washington Parkway is the longest continuous segment at about 30.1 miles.
How Hard Is This Drive?
This is a straightforward highway drive that stays mostly on Baltimore-Washington Parkway and Indian Head Highway. This route has several spots where lane changes, forks, or exits need your full attention. The trickiest moment comes around 0.6 miles in near MD 295 / North Greene Street.
Route Complexity
8/10
Demanding - plan breaks and stay ahead of the key maneuvers
This is a demanding drive. With 9 significant decision points across 59.3 miles, you will need to stay alert — especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.
Where does it get tricky?
The main spots that need attention: at 0.6 miles (MD 295 / North Greene Street): Lane positioning matters here; at 32.1 miles: Highway fork - watch signs carefully. Lane positioning matters here. Multiple destination signs - pick the right one; at 43.3 miles: Highway fork - watch signs carefully. Lane positioning matters here.
Critical Maneuvers
5 of 9 key pointsThese are the spots where you need to pay the most attention. Preview them before you drive.
5
0.6 mi into trip
|
~1m in
|
MD 295 / North Greene Street
Turn left onto MD 295 / North Greene Street
Lane positioning matters here
Use the left / straight lanes.
8
32.1 mi into trip
|
~46m in
Keep slight left at fork toward US 50 East: Richmond, Annapolis
Highway fork - watch signs carefully. Lane positioning matters here. Multiple destination signs - pick the right one
Use the slight left / slight right lanes.
Toward US 50 East: Richmond, Annapolis
7
43.3 mi into trip
|
~1h 3m in
Keep slight right at fork toward Indian Head
Highway fork - watch signs carefully. Lane positioning matters here
Use the straight / slight left lanes.
Toward Indian Head
7
44.3 mi into trip
|
~1h 5m in
Keep slight left at fork toward MD 210 South
Highway fork - watch signs carefully. Lane positioning matters here
Use the straight / slight right lanes.
Toward MD 210 South
5
44.5 mi into trip
|
~1h 6m in
|
MD 210 / Indian Head Highway
Merge onto MD 210 / Indian Head Highway
Merge point - match speed before joining. Lane positioning matters here
Use the left lane.
Towns Mentioned on Route Signs
Based on OSRM destination-sign hints, not a full list of every settlement the road passes.
Between City of Baltimore, MD and Bennsville, MD, road signs point toward Annapolis and Indian Head.
Annapolis
32.1 mi in
|
~46m
Indian Head
43.3 mi in
|
~1h 3m
Main Roads
| Road | Distance | Duration |
|---|---|---|
| Baltimore-Washington Parkway | 30.1 mi | 41m |
| Indian Head Highway | 9.6 mi | 13m |
| Anacostia Freeway | 8.4 mi | 13m |
| Bensville Road | 3.6 mi | 6m |
| Kenilworth Avenue Freeway | 2.2 mi | 3m |
| Berry Road | 1.5 mi | 2m |
| Russell Street | 1 mi | 2m |
| West Fayette Street | 0.4 mi | 1m |
Longest stretch:
Baltimore-Washington Parkway
— 30.1 mi, about 41m
Turn-by-Turn Driving Directions
Step-by-step road directions between City of Baltimore, MD and Bennsville, MD.
1
Start on East Fayette Street
0.2 mi
·
38 sec
·
East Fayette Street
Use the straight / left lanes.
2
Continue on West Fayette Street
0.4 mi
·
1 min
·
West Fayette Street
3
Turn left onto MD 295
0.4 mi
·
47 sec
·
North Greene Street
Use the left / straight lanes.
4
Continue on MD 295
1.0 mi
·
2 min
·
Russell Street
Use the straight / right lanes.
5
Turn straight onto MD 295
30 mi
·
41 min
·
Baltimore-Washington Parkway
Use the straight / slight right lanes.
6
Keep slight left at fork
0.5 mi
·
35 sec
Toward US 50 East: Richmond, Annapolis
Use the slight left / slight right lanes.
7
Continue on MD 201
2.2 mi
·
3 min
·
Kenilworth Avenue Freeway
Use the straight / slight right lanes.
8
Continue on DC 295
8.4 mi
·
13 min
·
Anacostia Freeway
Use the straight / slight right lanes.
9
Keep slight right at fork
1.0 mi
·
2 min
Toward Indian Head
Use the straight / slight left lanes.
10
Keep slight left at fork
0.3 mi
·
34 sec
Toward MD 210 South
Use the straight / slight right lanes.
11
Merge onto MD 210
9.6 mi
·
13 min
·
Indian Head Highway
Use the left lane.
12
Continue on MD 228
1.5 mi
·
2 min
·
Berry Road
13
Turn right onto MD 229
3.6 mi
·
6 min
·
Bensville Road
14
Turn left onto Billingsley Road
175 ft
·
4 sec
·
Billingsley Road
15
Arrive at destination
Billingsley Road
Trip Plan
Morning Departure
Leave by 9 AM and you'll arrive before lunch.
Evening Departure
Even a 4 PM departure gets you there before dark in summer.
You can normally do this drive in one day.
You may only need one short stretch break if traffic stays light.
The halfway point lands around 29.7 miles from City of Baltimore, MD, or about 42m into the drive.
The longest continuous stretch on this route runs about 30.1 miles.
This is a comfortable same-day trip.
Departure
Before you leave
Start with fuel, water, and navigation already sorted so the first hour feels easy.
First stop
Around 59.3 miles or 1h 29m in
Use this first pause for coffee, a restroom break, and a quick traffic check ahead.
Halfway reset
Around 29.7 miles or 42m in
This is the best place for your longest stop, a real meal, and a full fuel check.
Final approach
Final hour starts around 1h 14m
Traffic, exits, and arrival timing usually matter more near Bennsville, MD than in the middle of the route.
Before You Leave
+
Open the route before leaving City of Baltimore, MD so your first major turns are already loaded.
+
Leave with enough water and a charging cable within reach, not packed away.
+
Check your fuel range against the first long segment, especially if you are starting outside city service areas.
Day 1
Settle into the route from City of Baltimore, MD
This is one driving day of about 59.3 miles and 1h 29m.
Your first comfortable stop window is around 80 miles from City of Baltimore, MD.
This route can stay practical as a one-day drive if traffic stays reasonable.
You may only need one short stretch stop if conditions stay smooth.
The longest stretch is on Baltimore-Washington Parkway for about 30.1 miles.
Where to Stop
Rest stops, refuel points, and overnight suggestions along this route.
Halfway Point
Midpoint
About 29.7 mi from City of Baltimore, MD · 42m into the drive
Mid-route town
Meal stop
30 mi into the route
Best for: Lunch, fuel, and a longer reset
This sits close to the middle of the route, so it works well for the longest stop of the day.
Pacing Suggestions
Fuel and coffee
A short stop after about 59.3 miles helps settle the day before fatigue starts building.
Meal break
The midpoint is around 29.7 miles from City of Baltimore, MD, which is a good place for a longer meal and fuel stop.
Arriving in Bennsville, MD
The final approach into Bennsville, MD usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.
Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Bennsville, MD.
These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.
Fuel & Cost
Regular Gas
$9.83 one way
$19.66 round trip
$4.21/gal
25.4 MPG avg
21 kg CO2
| Fuel Type | $/gal | One Way | Round Trip |
|---|---|---|---|
| midgrade | $4.61 | $10.77 | $21.53 |
| premium | $4.93 | $11.50 | $23.00 |
| diesel | $5.61 | $13.09 | $26.19 |
No toll roads detected on this route.
Estimated Trip Cost (one way, 1 person)
Fuel
$10
Meals
$25–$50
Total
$35–$60
Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.
Estimated CO2 emission: 20.7 kg one way. Prices: EIA weekly data, 2026-04-13.
Driving Electric?
About $6 in charging · 0 stops · 67% less CO2
| Vehicle Type | kWh | Stops | DC Fast | Home Charge |
|---|---|---|---|---|
| Average EV | 17.8 | 0 | $6.23 | $2.85 |
| Efficient EV | 14.8 | 0 | $5.19 | $2.37 |
| EV Truck/SUV | 23.7 | 0 | $8.30 | $3.80 |
Gas CO2
21 kg
EV CO2
7 kg (67% less)
This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.
DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.
Travel Intel
Current conditions at both ends of the drive.
Destination
Bennsville, MD
Afternoon in Bennsville on Tuesday
Local time
2:44 PM
EDT
Current temp
89°F
Unavailable
Live forecast
Seasonal Notes
Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.
Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.
Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.
Time zone
Same local time
Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.
Temperature spread
4 degrees warmer at arrival
A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.
Road read
1h 29m on the road
Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.
Weather data from the National Weather Service. Conditions may change; check closer to your travel date.
Frequently Asked Questions
The drive from City of Baltimore, MD to Bennsville, MD covers 59.3 miles and takes about 1h 29m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are Baltimore-Washington Parkway, Indian Head Highway, Anacostia Freeway. Most of the drive stays on highways, so watch for ramps and exits.
This is a comfortable same-day trip.
The midpoint is about 29.7 miles from City of Baltimore, MD. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $9.83 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
This is a demanding drive. With 9 significant decision points across 59.3 miles, you will need to stay alert — especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.
The main spots that need attention: at 0.6 miles (MD 295 / North Greene Street): Lane positioning matters here; at 32.1 miles: Highway fork - watch signs carefully. Lane positioning matters here. Multiple destination signs - pick the right one; at 43.3 miles: Highway fork - watch signs carefully. Lane positioning matters here.
Between City of Baltimore, MD and Bennsville, MD, road signs point toward Annapolis and Indian Head.
Was this route helpful?
Thanks for your feedback!
Your tip has been submitted. Thanks!
/500
Recent Tips
·
Explore More
Continue From Bennsville, MD
More trips to Bennsville, MD
Explore more options from City of Baltimore, MD or browse trips ending in Bennsville, MD.
Looking for more statewide routes? Browse MD road trips.
Explore maps for City of Baltimore, MD or Bennsville, MD on MapSof.net.