Trip from City of Janesville, WI to Clintonville, WI

Drive Time

3h 22m

Distance

151.1 mi

243 km

Drive Score

8/10

Great drive

Same Day?

Yes, doable

Fuel Cost

$23

one way

EV Charging

Loading...

station data

Best Time to Leave

Save up to 36 min
4 AM
3h 11m ★
6 AM
3h 23m
8 AM
3h 47m
10 AM
3h 31m
12 PM
3h 29m
3 PM
3h 32m
5 PM
3h 46m
8 PM
3h 16m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

Downtown City of Janesville, WI, WI

City of Janesville, WI

Tom Fisk

Downtown Clintonville, WI, WI

Clintonville, WI

Tom Fisk

Trip Overview

The drive from City of Janesville, WI to Clintonville, WI covers 151.1 miles and takes about 3h 22m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.

The route leans on Harrison Street, East Milwaukee Street, Milton Avenue for much of the mileage, and the overall profile is turn-heavy local drive. At current regular gas prices, budget about $22.95 one way before food or hotel costs.

Trip Pace

Same-day drive is realistic

A same-day return is realistic if you keep stops short.

Break Rhythm

1 planned break

A short stop every 2 to 3 hours is enough for this drive.

Midpoint

75.5 miles from City of Janesville, WI

A natural place for your longest stop of the day , about 1h 41m into the drive .

Drive Character

Expect a 3h 22m drive with frequent turns across 151.1 miles of local and secondary roads.

This route has more turning and local-road decision points than a simple highway run.
There are about 30 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
Harrison Street is one of the defining roads on this drive.

How Hard Is This Drive?

Expect a hands-on drive with frequent turns and local roads rather than long highway stretches. Navigation is very simple — set it and forget it for most of the drive.

Route Complexity 1/10

Very easy - short and simple to drive

The drive from City of Janesville, WI to Clintonville, WI is easy. At 3h 22m with 0% highway, most drivers will find it relaxed and low-stress.

Where does it get tricky?

This route does not have any notably tricky sections. Most of the drive from City of Janesville, WI to Clintonville, WI is straightforward, with well-signed roads and simple exits.

Main Roads

Road Distance Duration
Harrison Street Unavailable Refreshing
East Milwaukee Street Unavailable Refreshing
Milton Avenue Unavailable Refreshing
Western Avenue Unavailable Refreshing
West North Street Unavailable Refreshing
North Main Street Unavailable Refreshing
Highway 26 Unavailable Refreshing
Front Street Unavailable Refreshing

Per-road distance and duration are being refreshed from OSRM for this route.

Longest stretch: Harrison Street — detailed segment metrics are refreshing.

Turn-by-Turn Driving Directions

Step-by-step road directions between City of Janesville, WI and Clintonville, WI.

1

Start on East Court Street

148 ft · 6 sec · East Court Street
2

Turn right onto Harrison Street

512 ft · 27 sec · Harrison Street
3

Turn left onto East Milwaukee Street

0.2 mi · 21 sec · East Milwaukee Street
4

Turn sharp right onto Milton Avenue

14 mi · 20 min · Milton Avenue
5

Continue straight

21 mi · 26 min
6

Continue straight

23 mi · 28 min
7

Turn left onto Western Avenue

0.3 mi · 52 sec · Western Avenue
8

At the end of the road, turn right onto West North Street

0.6 mi · 1 min · West North Street
9

At the end of the road, turn left onto North Main Street

0.9 mi · 1 min · North Main Street
10

Continue on State Highway 26

5.6 mi · 7 min · State Highway 26
11

Continue on Front Street

0.5 mi · 1 min · Front Street
12

Continue on State Highway 26

6.7 mi · 9 min · State Highway 26
13

Take the exit slight right

0.5 mi · 1 min
14

Merge slight left

3.8 mi · 4 min
15

Take the exit slight right toward WI 26 North: Rosendale

0.2 mi · 25 sec · WI 26 North: Rosendale
16

Keep slight right

0.4 mi · 47 sec
17

Turn left onto State Highway 26

10 mi · 13 min · State Highway 26
18

Continue on South Main Street

1.0 mi · 2 min · South Main Street
19

Continue on State Highway 26

11 mi · 15 min · State Highway 26
20

Turn left onto I-41_North: Appleton, Green_Bay

0.3 mi · 39 sec · I-41_North: Appleton, Green_Bay
21

Merge slight left onto Appleton

6.8 mi · 7 min · Appleton
22

Take the exit slight right toward US 45: New London, Algoma Boulevard

0.2 mi · 23 sec · US 45: New London, Algoma Boulevard
23

Keep slight left to continue on US 45 North: New London

0.8 mi · 58 sec · US 45 North: New London
24

Merge slight left

15 mi · 17 min
25

Keep slight right to continue on US 45 North: New London

2.9 mi · 3 min · US 45 North: New London
26

Enter the roundabout and take exit 2 toward US Highway 45

125 ft · 7 sec · US Highway 45
27

Exit the roundabout onto US Highway 45

24 mi · 32 min · US Highway 45
28

Continue on South Main Street

1.1 mi · 2 min · South Main Street
29

Turn left onto 8th Place

108 ft · 5 sec · 8th Place
30

Arrive at your destination

Trip Plan

Morning Departure

An early start around 7-8 AM gets you there with plenty of daylight left.

Evening Departure

A late afternoon start means arriving after dark. Morning is better.

You can normally do this drive in one day.
Plan roughly 1 meaningful break for fuel, food, and rest.
The halfway point lands around 75.5 miles from City of Janesville, WI, or about 1h 41m into the drive.

This is a comfortable same-day trip.

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 80 miles or 1h 47m in

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 75.5 miles or 1h 41m in

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Final hour starts around 2h 46m

Traffic, exits, and arrival timing usually matter more near Clintonville, WI than in the middle of the route.

Before You Leave

+

Open the route before leaving City of Janesville, WI so your first major turns are already loaded.

+

Leave with enough water and a charging cable within reach, not packed away.

+

Check your fuel range against the first long segment, especially if you are starting outside city service areas.

Day 1

Settle into the route from City of Janesville, WI

This is one driving day of about 151.1 miles and 3h 22m.

Your first comfortable stop window is around 80 miles from City of Janesville, WI.
This route can stay practical as a one-day drive if traffic stays reasonable.
Plan about 1 real break rather than only quick fuel stops.

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 75.5 mi from City of Janesville, WI · 1h 41m into the drive

Mid-route town

Meal stop

Rockford, IL

76 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Pacing Suggestions

Rockford, IL

Fuel and coffee

A short stop after about 80 miles helps settle the day before fatigue starts building.

Rockford, IL

Meal break

The midpoint is around 75.5 miles from City of Janesville, WI, which is a good place for a longer meal and fuel stop.

Arriving in Clintonville, WI

The final approach into Clintonville, WI usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Clintonville, WI.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Regular Gas

$22.95 one way

$45.90 round trip

$3.86/gal 25.4 MPG avg 53 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.25 $25.30 $50.60
premium $4.80 $28.52 $57.05
diesel $5.64 $33.57 $67.14

No toll roads detected on this route.

Estimated Trip Cost (one way, 1 person)

Fuel

$23

Meals

$25–$50

Total

$48–$73

Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.

Estimated CO2 emission: 52.9 kg one way. Prices: EIA weekly data, 2026-04-06.

Driving Electric?

About $16 in charging · 0 stops · 66% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 45.3 0 $15.87 $7.25
Efficient EV 37.8 0 $13.22 $6.04
EV Truck/SUV 60.4 0 $21.15 $9.67

Gas CO2

53 kg

EV CO2

18 kg (66% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast data refreshed 3 days ago

Origin

City of Janesville, WI

Night in City of Janesville on Sunday

Local time

9:15 PM

CDT

Current temp

48°F

Unavailable

Live forecast

Destination

Clintonville, WI

Night in Clintonville on Sunday

Local time

9:15 PM

CDT

Current temp

43°F

Unavailable

Live forecast

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.

Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.

Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

5 degrees cooler at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

3h 22m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from City of Janesville, WI to Clintonville, WI covers 151.1 miles and takes about 3h 22m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are Harrison Street, East Milwaukee Street, Milton Avenue. Expect a mix of highway and local road driving.
This is a comfortable same-day trip.
The midpoint is about 75.5 miles from City of Janesville, WI. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $22.95 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
An early start around 7-8 AM gets you there with plenty of daylight left. A late afternoon start means arriving after dark. Morning is better.
Plan about 1 meaningful break for fuel, food, or rest. A short stop every 2 to 3 hours is enough for this drive.
The drive from City of Janesville, WI to Clintonville, WI is easy. At 3h 22m with 0% highway, most drivers will find it relaxed and low-stress.
This route does not have any notably tricky sections. Most of the drive from City of Janesville, WI to Clintonville, WI is straightforward, with well-signed roads and simple exits.
The route from City of Janesville, WI to Clintonville, WI does not surface many named destination signs beyond the main corridor.

Was this route helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Return Trip

Clintonville, WI to City of Janesville, WI

Plan the drive back the other way.

151.1 mi 2h 44m

More trips to Clintonville, WI

Explore more options from City of Janesville, WI or browse trips ending in Clintonville, WI.

Looking for more statewide routes? Browse WI road trips.

Explore maps for City of Janesville, WI or Clintonville, WI on MapSof.net.