Origin
Clearview, WA
Night in Clearview on Thursday
Local time
10:16 PM
PDT
Current temp
42°F
Unavailable
Live forecast
Trip from Clearview, WA to Vancouver, WA
Compiled by the Trip.ovh editorial team · Last recalculated Apr 17, 2026 · Methodology
Drive Time
3h 38m
Distance
184 mi
296 km
Drive Score
8/10
Great drive
Same Day?
Yes, doable
Fuel Cost
$39
one way
EV Charging
Unknown
Best Time to Leave
4 AM
3h 26m
★
6 AM
3h 38m
8 AM
4h 3m
10 AM
3h 47m
12 PM
3h 45m
3 PM
3h 48m
5 PM
4h 2m
8 PM
3h 31m
Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.
Clearview, WA
Pixabay
Trip Overview
This 184-mile journey from Clearview, WA to Vancouver, WA is a straightforward, highway-focused drive that can easily be completed in a single day, taking approximately 3 hours and 38 minutes. You'll primarily be on I-5 and I-405, with a short stint on State Route 9, making it a 99% highway experience. With an estimated fuel cost of $39, this route offers a practical way to travel between two points within the Pacific Coast region of Washington state. It's designed for efficiency, making it ideal if you're looking to get from point A to point B without much fuss.
Trip Pace
Same-day drive is realistic
A same-day return is realistic if you keep stops short.
Break Rhythm
1 planned break
A short stop every 2 to 3 hours is enough for this drive.
Midpoint
92 miles from Clearview, WA
A natural place for your longest stop of the day , about 1h 53m into the drive .
Who Is This Route For?
Weekend Trip
Doable as a same-day drive at 3h 38m. Total distance: 184 miles.
Family Friendly
Moderate complexity with 1 natural rest stops along the way.
Solo Traveler
3h 38m drive, comfortable solo distance.
First-Time Driver
Mostly highway driving (99%). Some complex stretches to watch for.
Drive Character
Expect a predominantly highway-driven experience on this route, with 99% of your travel occurring on major freeways like I-5 and I-405. This means consistent speeds and fewer opportunities for spontaneous roadside stops. The longest uninterrupted stretch you'll encounter is a substantial 152.7 miles, primarily on I-5, so be prepared for extended periods of highway cruising. While State Route 9 offers a slight variation, the overall character remains that of a fast-paced, efficient drive designed to cover distance.
Most of the miles stay on highways, which makes pacing and fuel planning easier than turn-by-turn city driving.
There are about 15 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
I 5 is the longest continuous segment at about 152.7 miles.
How Hard Is This Drive?
This is a straightforward highway drive that stays mostly on I 5 and I 405. This route has several spots where lane changes, forks, or exits need your full attention. The trickiest moment comes early in the drive near 180th Street Southeast.
Driving Effort
9/10
High effort - long or complex enough to need steady focus all day
Balances navigation complexity with total wheel time.
This is a demanding drive. With 13 significant decision points across 184 miles, you will need to stay alert - especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.
Where does it get tricky?
The main spots that need attention: near the start (180th Street Southeast): Sharp turn - reduce speed on approach; at 6.4 miles: Exit ramp - move to the correct lane early. Lane positioning matters here; at 30.6 miles: Exit ramp - move to the correct lane early. Lane positioning matters here.
Critical Maneuvers
5 of 13 key pointsThese are the spots where you need to pay the most attention. Preview them before you drive.
8
0 mi into trip
|
~0m in
|
180th Street Southeast
Turn uturn onto 180th Street Southeast
Sharp turn - reduce speed on approach
6
6.4 mi into trip
|
~10m in
Take the exit toward I 405 South: Bellevue
Exit ramp - move to the correct lane early. Lane positioning matters here
Use the straight / slight right lanes.
Toward I 405 South: Bellevue
6
30.6 mi into trip
|
~40m in
Take the exit toward I 5 South: Portland
Exit ramp - move to the correct lane early. Lane positioning matters here
Use the straight / right lanes.
Toward I 5 South: Portland
7
183.6 mi into trip
|
~3h 37m in
Take the exit toward 4th Plain Boulevard
Exit ramp - move to the correct lane early. Lane positioning matters here
Use the straight / slight right lanes.
Exit 1D
Toward 4th Plain Boulevard
8
183.8 mi into trip
|
~3h 37m in
Keep slight left at fork toward 4th Plain Boulevard East
Highway fork - watch signs carefully. Lane positioning matters here
Use the left lane.
Toward 4th Plain Boulevard East
Main Roads
| Road | Distance | Duration |
|---|---|---|
| I 5 | 152.7 mi | 2h 55m |
| I 405 | 23.5 mi | 29m |
| State Route 9 | 3.7 mi | 6m |
| State Route 522 | 2.3 mi | 2m |
| East Fourth Plain Boulevard | 0.2 mi | <1m |
| 180th Street Southeast | <0.1 mi | <1m |
Longest stretch:
I 5
— 152.7 mi, about 2h 55m
Turn-by-Turn Driving Directions
Step-by-step road directions between Clearview, WA and Vancouver, WA.
1
Start on 180th Street Southeast
245 ft
·
34 sec
·
180th Street Southeast
2
Turn uturn onto 180th Street Southeast
266 ft
·
9 sec
·
180th Street Southeast
3
Turn left onto WA 9
3.7 mi
·
6 min
·
State Route 9
Use the left / uturn lanes.
4
Take the ramp
0.3 mi
·
38 sec
Toward WA 522 West: Seattle
5
Merge onto WA 522
2.3 mi
·
2 min
·
State Route 522
Use the straight / slight right lanes.
6
Take the exit
0.8 mi
·
58 sec
Toward I 405 South: Bellevue
Use the straight / slight right lanes.
7
Turn slight left onto I 405
23 mi
·
29 min
·
I 405
Use the straight / slight right lanes.
8
Take the exit
0.3 mi
·
48 sec
Toward I 5 South: Portland
Use the straight / right lanes.
9
Merge onto I 5
20 mi
·
25 min
·
I 5
Use the straight / slight right lanes.
10
Keep slight right at fork onto I 5
126 mi
·
2 hr 22 min
·
I 5
Use the straight / slight right lanes.
11
Keep slight left at fork onto I 5
6.2 mi
·
7 min
·
I 5
Use the straight / slight right lanes.
12
Take the exit
0.2 mi
·
23 sec
Exit 1D
Toward 4th Plain Boulevard
Use the straight / slight right lanes.
13
Keep slight left at fork
242 ft
·
13 sec
Toward 4th Plain Boulevard East
Use the left lane.
14
Turn left onto East Fourth Plain Boulevard
0.2 mi
·
23 sec
·
East Fourth Plain Boulevard
Use the left lane.
15
Arrive at destination
East Fourth Plain Boulevard
Trip Plan
Given its 3-hour 38-minute duration, this route is perfectly suited for a single-day trip, offering flexibility in your departure time. Plan for one main stop to break up the 184 miles, perhaps around the halfway point, to stretch your legs and refuel. The substantial 152.7-mile stretch on I-5 means you'll want to ensure you have a full tank before embarking on that segment. Be mindful of potential traffic, especially as you approach and navigate the Seattle metropolitan area via I-405.
Morning Departure
An early start around 7-8 AM gets you there with plenty of daylight left.
Evening Departure
A late afternoon start means arriving after dark. Morning is better.
You can normally do this drive in one day.
Plan roughly 1 meaningful break for fuel, food, and rest.
The halfway point lands around 92 miles from Clearview, WA, or about 1h 53m into the drive.
The longest continuous stretch on this route runs about 152.7 miles.
This is a comfortable same-day trip.
Departure
Before you leave
Start with fuel, water, and navigation already sorted so the first hour feels easy.
First stop
Around 40 miles or 53m in
Use this first pause for coffee, a restroom break, and a quick traffic check ahead.
Halfway reset
Around 92 miles or 1h 53m in
This is the best place for your longest stop, a real meal, and a full fuel check.
Final approach
Final hour starts around 2h 59m
Traffic, exits, and arrival timing usually matter more near Vancouver, WA than in the middle of the route.
Before You Leave
+
Open the route before leaving Clearview, WA so your first major turns are already loaded.
+
Leave with enough water and a charging cable within reach, not packed away.
+
Check your fuel range against the first long segment, especially if you are starting outside city service areas.
Day 1
Settle into the route from Clearview, WA
This is one driving day of about 184 miles and 3h 38m.
Your first comfortable stop window is around 40 miles from Clearview, WA.
This route can stay practical as a one-day drive if traffic stays reasonable.
Plan about 1 real break rather than only quick fuel stops.
The longest stretch is on I 5 for about 152.7 miles.
Where to Stop
Rest stops, refuel points, and overnight suggestions along this route.
Halfway Point
Midpoint
About 92 mi from Clearview, WA · 1h 53m into the drive
Mid-route town
Meal stop
92 mi into the route
Best for: Lunch, fuel, and a longer reset
This sits close to the middle of the route, so it works well for the longest stop of the day.
Pacing Suggestions
Fuel and coffee
A short stop after about 40 miles helps settle the day before fatigue starts building.
Meal break
The midpoint is around 92 miles from Clearview, WA, which is a good place for a longer meal and fuel stop.
Before the longest stretch
Fuel checkTop up before I 5 if your tank is already low. That segment runs about 152.7 miles.
Arriving in Vancouver, WA
The final approach into Vancouver, WA usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.
Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Vancouver, WA.
After long uninterrupted mileage, take five minutes before the last urban segment to reset and refocus on exits, merges, and city traffic.
These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.
Fuel & Cost
Regular Gas
$38.51 one way
$77.02 round trip
$5.32/gal
25.4 MPG avg
64 kg CO2
| Fuel Type | $/gal | One Way | Round Trip |
|---|---|---|---|
| midgrade | $5.58 | $40.39 | $80.77 |
| premium | $5.77 | $41.78 | $83.57 |
| diesel | $5.61 | $40.62 | $81.25 |
No toll roads detected on this route.
Estimated Trip Cost (one way, 1 person)
Fuel
$39
Meals
$25–$50
Total
$64–$89
Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.
Estimated CO2 emission: 64.4 kg one way. Prices: EIA weekly data, 2026-04-13.
Driving Electric?
About $19 in charging · 0 stops · 66% less CO2
| Vehicle Type | kWh | Stops | DC Fast | Home Charge |
|---|---|---|---|---|
| Average EV | 55.2 | 0 | $19.32 | $8.83 |
| Efficient EV | 46 | 0 | $16.10 | $7.36 |
| EV Truck/SUV | 73.6 | 0 | $25.76 | $11.78 |
Gas CO2
64 kg
EV CO2
22 kg (66% less)
This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.
DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.
Travel Intel
Current conditions at both ends of the drive.
Destination
Vancouver, WA
Night in Vancouver on Thursday
Local time
10:16 PM
PDT
Current temp
49°F
Unavailable
Live forecast
Seasonal Notes
Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.
Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.
Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.
Time zone
Same local time
Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.
Temperature spread
7 degrees warmer at arrival
A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.
Road read
3h 38m on the road
Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.
Weather data from the National Weather Service. Conditions may change; check closer to your travel date.
Frequently Asked Questions
The drive from Clearview, WA to Vancouver, WA covers 184 miles and takes about 3h 38m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are I 5, I 405, State Route 9. Most of the drive stays on highways, so watch for ramps and exits.
This is a comfortable same-day trip.
The midpoint is about 92 miles from Clearview, WA. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $38.51 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
An early start around 7-8 AM gets you there with plenty of daylight left. A late afternoon start means arriving after dark. Morning is better.
Plan about 1 meaningful break for fuel, food, or rest. A short stop every 2 to 3 hours is enough for this drive.
This is a demanding drive. With 13 significant decision points across 184 miles, you will need to stay alert - especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.
The main spots that need attention: near the start (180th Street Southeast): Sharp turn - reduce speed on approach; at 6.4 miles: Exit ramp - move to the correct lane early. Lane positioning matters here; at 30.6 miles: Exit ramp - move to the correct lane early. Lane positioning matters here.
The route from Clearview, WA to Vancouver, WA does not surface many named destination signs beyond the main corridor.
Was this helpful?
Thanks for your feedback!
Your tip has been submitted. Thanks!
/500
Recent Tips
·
Explore More
Continue From Vancouver, WA
More from Clearview, WA
More trips to Vancouver, WA
Explore more options from Clearview, WA or browse trips ending in Vancouver, WA.
Looking for more statewide routes? Browse WA road trips.