Skip to main content

Trip from Clinton, MS to Ripley, MS

Compiled and reviewed by the Trip.ovh planning team at COD Solutions Oy · Last reviewed Apr 17, 2026 · Editorial standards

Drive Time

4h 28m

Distance

219 mi

352 km

Drive Score

8/10

Great drive

Same Day?

Yes, doable

Fuel Cost

$33

one way

EV Charging

Unknown

Best Time to Leave

Save up to 40 min
4 AM
4h 15m ★
6 AM
4h 28m
8 AM
4h 55m
10 AM
4h 38m
12 PM
4h 35m
3 PM
4h 39m
5 PM
4h 54m
8 PM
4h 20m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

suburb city of Jackson, located in Hinds County, Mississippi, United States

Clinton, MS

Wikimedia Commons

city in Mississippi, United States

Ripley, MS

Wikimedia Commons

Trip Overview

The drive from Clinton, MS to Ripley, MS covers 219 miles and takes about 4h 28m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.

The route leans on Hester Street, East Leake Street, West Lakeview Drive for much of the mileage, and the overall profile is turn-heavy local drive. At current regular gas prices, budget about $33.07 one way before food or hotel costs.

Trip Pace

Same-day drive is realistic

A same-day return is possible, but it will make for a full day on the road.

Break Rhythm

1 planned break

Plan on a short reset every 3 to 4 hours to stay fresh behind the wheel.

Midpoint

109.5 miles from Clinton, MS

A natural place for your longest stop of the day , about 2h 14m into the drive .

Who Is This Route For?

Weekend Trip

Doable as a same-day drive at 4h 28m. Total distance: 219 miles.

Family Friendly

Moderate complexity with 1 natural rest stops along the way.

Solo Traveler

4h 28m drive, comfortable solo distance.

First-Time Driver

Mostly highway driving (0%). Straightforward navigation.

Scenic Drive

Turn-heavy local drive route profile.

Drive Character

Expect a 4h 28m drive with frequent turns across 219 miles of local and secondary roads.

This route has more turning and local-road decision points than a simple highway run.
There are about 24 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
Hester Street is one of the defining roads on this drive.

How Hard Is This Drive?

Expect a hands-on drive with frequent turns and local roads rather than long highway stretches. There are only a few real navigation decisions along the way.

Driving Effort 3/10

Easy - simple navigation with a manageable amount of wheel time

Balances navigation complexity with total wheel time.

This is a straightforward 4h 28m drive. You will face about 0 decision points, but nothing that requires special attention if you follow navigation.

Where does it get tricky?

This route does not have any notably tricky sections. Most of the drive from Clinton, MS to Ripley, MS is straightforward, with well-signed roads and simple exits.

Main Roads

Road Distance Duration
Hester Street
East Leake Street
West Lakeview Drive
Clinton Boulevard
West Capitol Street
I 55 North
MS 7 North
MS 30

Some road-level metrics are being recalculated.

Longest stretch: Hester Street — detailed segment metrics are refreshing.

Turn-by-Turn Driving Directions

Step-by-step road directions between Clinton, MS and Ripley, MS.

1

Start on Dunton Road

453 ft · 22 sec · Dunton Road
2

Turn right onto Hester Street

0.1 mi · 29 sec · Hester Street
3

Turn left onto East Leake Street

312 ft · 14 sec · East Leake Street
4

Continue on East Leake Street

0.5 mi · 1 min · East Leake Street
5

At the end of the road, turn right onto West Lakeview Drive

0.3 mi · 44 sec · West Lakeview Drive
6

Turn left onto Clinton Boulevard

3.8 mi · 6 min · Clinton Boulevard
7

Continue on West Capitol Street

489 ft · 10 sec · West Capitol Street
8

Take the ramp slight right

0.2 mi · 26 sec
9

Merge slight left

8.7 mi · 9 min
10

Keep slight left to continue on I 55 North

0.7 mi · 1 min · I 55 North
11

Merge slight left

106 mi · 1 hr 54 min
12

Take the exit slight right toward MS 7 North: Coffeeville

36 mi · 41 min · MS 7 North: Coffeeville
13

Enter the roundabout and take exit 2 toward MS 7 North: Oxford

171 ft · 2 sec · MS 7 North: Oxford
14

Exit the roundabout onto MS 7 North: Oxford

8.4 mi · 11 min · MS 7 North: Oxford
15

Take the exit slight right toward MS 30: New Albany

0.2 mi · 24 sec · MS 30: New Albany
16

Turn right onto Mississippi Highway 30

30 mi · 43 min · Mississippi Highway 30
17

Take the ramp right toward Tupelo

2.2 mi · 2 min · Tupelo
18

Take the exit slight right toward MS 15, MS 30 East: Pontotoc, Ripley

0.2 mi · 29 sec · MS 15, MS 30 East: Pontotoc, Ripley
19

Keep slight left

148 ft · 6 sec
20

Turn left onto Mississippi Highway 15

8.8 mi · 13 min · Mississippi Highway 15
21

Turn straight

11 mi · 16 min
22

Turn left onto South Main Street

0.4 mi · 1 min · South Main Street
23

Turn left onto West Walnut Street

456 ft · 20 sec · West Walnut Street
24

Arrive at your destination

Trip Plan

Morning Departure

An early start around 7-8 AM gets you there with plenty of daylight left.

Evening Departure

A late afternoon start means arriving after dark. Morning is better.

You can normally do this drive in one day.
Plan roughly 1 meaningful break for fuel, food, and rest.
The halfway point lands around 109.5 miles from Clinton, MS, or about 2h 14m into the drive.

This is a comfortable same-day trip.

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 48 miles or 58m in

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 109.5 miles or 2h 14m in

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Final hour starts around 3h 40m

Traffic, exits, and arrival timing usually matter more near Ripley, MS than in the middle of the route.

Before You Leave

+

Open the route before leaving Clinton, MS so your first major turns are already loaded.

+

Leave with enough water and a charging cable within reach, not packed away.

+

Check your fuel range against the first long segment, especially if you are starting outside city service areas.

Day 1

Settle into the route from Clinton, MS

This is one driving day of about 219 miles and 4h 28m.

Your first comfortable stop window is around 48 miles from Clinton, MS.
This route can stay practical as a one-day drive if traffic stays reasonable.
Plan about 1 real break rather than only quick fuel stops.

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 109.5 mi from Clinton, MS · 2h 14m into the drive

city in Yalobusha County, Mississippi, United States of America

Mid-route town

Meal stop

Water Valley, MS

110 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Pacing Suggestions

Canton, MS

Fuel and coffee

A short stop after about 48 miles helps settle the day before fatigue starts building.

Water Valley, MS

Meal break

The midpoint is around 109.5 miles from Clinton, MS, which is a good place for a longer meal and fuel stop.

Arriving in Ripley, MS

The final approach into Ripley, MS usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Ripley, MS.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Regular Gas

$33.07 one way

$66.15 round trip

$3.84/gal 25.4 MPG avg 77 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.21 $36.31 $72.61
premium $4.56 $39.31 $78.62
diesel $5.61 $48.35 $96.70

No toll roads detected on this route.

Estimated Trip Cost (one way, 1 person)

Fuel

$33

Meals

$25–$50

Total

$58–$83

Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.

Estimated CO2 emission: 76.6 kg one way. Prices: EIA weekly data, 2026-04-13.

Driving Electric?

About $23 in charging · 0 stops · 66% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 65.7 0 $23.00 $10.51
Efficient EV 54.8 0 $19.16 $8.76
EV Truck/SUV 87.6 1 $30.66 $14.02

Gas CO2

77 kg

EV CO2

26 kg (66% less)

Plan for 0 charging stops, roughly every 270 miles. Allow 25-40 minutes per stop at a DC fast charger.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast as of Apr 15, 2026

Origin

Clinton, MS

Late night in Clinton on Friday

Local time

4:50 AM

CDT

Current temp

54°F

Unavailable

Live forecast

Destination

Ripley, MS

Late night in Ripley on Friday

Local time

4:50 AM

CDT

Current temp

52°F

Unavailable

Live forecast

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.

Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.

Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

2 degrees cooler at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

4h 28m on the road

An early start around 7-8 AM gets you there with plenty of daylight left.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Clinton, MS to Ripley, MS covers 219 miles and takes about 4h 28m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.

The main roads are Hester Street, East Leake Street, West Lakeview Drive. Expect a mix of highway and local road driving.

This is a comfortable same-day trip.

The midpoint is about 109.5 miles from Clinton, MS. Look for rest areas, gas stations, or food options near the halfway mark.

At current regular gas prices, expect to spend about $33.07 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.

An early start around 7-8 AM gets you there with plenty of daylight left. A late afternoon start means arriving after dark. Morning is better.

Plan about 1 meaningful break for fuel, food, or rest. Plan on a short reset every 3 to 4 hours to stay fresh behind the wheel.

This is a straightforward 4h 28m drive. You will face about 0 decision points, but nothing that requires special attention if you follow navigation.

This route does not have any notably tricky sections. Most of the drive from Clinton, MS to Ripley, MS is straightforward, with well-signed roads and simple exits.

The route from Clinton, MS to Ripley, MS does not surface many named destination signs beyond the main corridor.

How this page is built

Compiled and maintained by the Trip.ovh planning team at COD Solutions Oy (Helsinki). Each route is built from authoritative open government and mapping datasets rather than crowdsourced reviews. Distances and geometry come from OSRM over OpenStreetMap. Fuel cost uses EIA weekly regional averages. Pages are published only after passing our data-quality checks; our methodology page documents refresh cadence, editorial standards, and known limitations.

Was this helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Explore more options from Clinton, MS or browse trips ending in Ripley, MS.

Looking for more statewide routes? Browse MS road trips.