This 101.6-mile drive from Clinton Township, MI to Bath, MI is easily manageable as a single-day trip, taking approximately 1 hour and 57 minutes. With a projected fuel cost of around $16, it’s an economical option for exploring the Midwest region. The route primarily utilizes major highways, making it a straightforward journey without the need for an overnight stay. You'll spend a good portion of your time on freeways, so expect a consistent pace for most of the drive. This is a practical choice if you're looking for an efficient way to travel between these two Michigan locations.
Trip Pace
Same-day drive is realistic
A same-day return is realistic if you keep stops short.
Midpoint
50.8 miles from Clinton Township, MI
A natural place for your longest stop of the day
, about 1h 2m into the drive
.
Who Is This Route For?
Weekend Trip
Doable as a same-day drive at 1h 57m. Total distance: 101.6 miles.
Family Friendly
Moderate complexity with 0 natural rest stops along the way.
Solo Traveler
1h 57m drive, comfortable solo distance.
First-Time Driver
Mostly highway driving (77%). Some complex stretches to watch for.
Drive Character
The majority of this drive, about 77% highway, is focused on efficient travel. You'll be on the Chevrolet-Buick Freeway and I-75 for significant stretches, offering a consistent, high-speed experience. The longest uninterrupted segment measures 40.1 miles on the Chevrolet-Buick Freeway, so you can settle in for a solid run. While primarily a highway-focused route, be aware that your experience will be dominated by this type of road, rather than winding country lanes or scenic byways. Expect a steady progression as you cover the distance.
Most of the miles stay on highways, which makes pacing and fuel planning easier than turn-by-turn city driving.
There are about 21 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
Chevrolet-Buick Freeway is the longest continuous segment at about 40.1 miles.
How Hard Is This Drive?
This is a straightforward highway drive that stays mostly on Chevrolet-Buick Freeway and I 75. This route has several spots where lane changes, forks, or exits need your full attention. The trickiest moment comes around 4.3 miles in.
Driving Effort10/10
Demanding - stay alert through the decision-heavy sections
Balances navigation complexity with total wheel time.
This drive requires moderate attention. Across 101.6 miles you will encounter 17 spots where lane choice or exit timing matters. Not difficult for experienced highway drivers, but worth previewing the tricky sections before you go.
Where does it get tricky?
The main spots that need attention: at 4.3 miles: Exit ramp - move to the correct lane early. Lane positioning matters here; at 20.1 miles: Exit ramp - move to the correct lane early. Lane positioning matters here; at 58.4 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one.
Critical Maneuvers
5 of 17 key points
These are the spots where you need to pay the most attention. Preview them before you drive.
7
4.3 mi into trip|~8m in
Take the exit toward M 59 West
Exit ramp - move to the correct lane early. Lane positioning matters here
Use the left lane.
Toward M 59 West
7
20.1 mi into trip|~28m in
Take the exit toward I 75 North: Flint
Exit ramp - move to the correct lane early. Lane positioning matters here
Use the slight right lane.
Exit 40B
Toward I 75 North: Flint
7
58.4 mi into trip|~1h 10m in
Take the exit toward I 69: Lansing, Port Huron
Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one
Use the slight right lane.
Toward I 69: Lansing, Port Huron
7
58.6 mi into trip|~1h 11m in
Keep slight right at fork toward I 69: Lansing, Flint, Port Huron
Highway fork - watch signs carefully. Multiple destination signs - pick the right one
Toward I 69: Lansing, Flint, Port Huron
6
100 mi into trip|~1h 54m in
Take the exit toward Bath
Exit ramp - move to the correct lane early. Lane positioning matters here
Use the slight right lane.
Toward Bath
Towns Mentioned on Route Signs
Based on OSRM destination-sign hints, not a full list of every settlement the road passes.
Between Clinton Township, MI and Bath, MI, road signs point toward Port Huron and Flint.
Port Huron
58.4 mi in|~1h 10m
Flint
58.6 mi in|~1h 11m
Main Roads
Road
Distance
Duration
Chevrolet-Buick Freeway
40.1 mi
40m
I 75
37.7 mi
40m
Hall Road
15.8 mi
20m
Cass Avenue
1.6 mi
2m
Webster Road
1.3 mi
2m
Romeo Plank Road
1.2 mi
1m
Moravian Drive
1.2 mi
2m
White Oaks Drive
0.2 mi
<1m
Longest stretch:
Chevrolet-Buick Freeway
— 40.1 mi, about 40m
Turn-by-Turn Driving Directions
Step-by-step road directions between Clinton Township, MI and Bath, MI.
1
Start on Red Oaks Drive
289 ft·17 sec·Red Oaks Drive
2
Turn left onto White Oaks Drive
0.2 mi·55 sec·White Oaks Drive
3
At end of road, turn left onto Moravian Drive
1.2 mi·2 min·Moravian Drive
4
At end of road, turn left onto Cass Avenue
1.6 mi·2 min·Cass Avenue
5
Enter roundabout onto Romeo Plank Road
82 ft·1 sec·Romeo Plank Road
6
Continue on Romeo Plank Road
0.1 mi·11 sec·Romeo Plank Road
7
Enter roundabout onto Romeo Plank Road
90 ft·1 sec·Romeo Plank Road
8
Continue on Romeo Plank Road
1.0 mi·1 min·Romeo Plank Road
9
Turn right onto M 59
501 ft·8 sec·Hall Road
10
Take the exit
259 ft·9 sec
Toward M 59 WestUse the left lane.
11
Merge onto M 59
16 mi·20 min·Hall Road
Use the left lane.
12
Take the exit
0.6 mi·1 min
Exit 40BToward I 75 North: FlintUse the slight right lane.
13
Merge onto I 75
33 mi·35 min·I 75
14
Keep slight left at fork onto I 75
4.9 mi·5 min·I 75
Toward I 75: Saginaw
15
Take the exit
0.3 mi·33 sec
Toward I 69: Lansing, Port HuronUse the slight right lane.
16
Keep slight right at fork
0.2 mi·25 sec
Toward I 69: Lansing, Flint, Port Huron
17
Keep slight left at fork
1.0 mi·2 min
Toward I 69 West: Lansing
18
Merge onto I 69
40 mi·40 min·Chevrolet-Buick Freeway
19
Take the exit
0.3 mi·43 sec
Toward BathUse the slight right lane.
20
Turn left onto Webster Road
1.3 mi·2 min·Webster Road
Use the left lane.
21
Arrive at destination
Webster Road
Trip Plan
Given the relatively short duration of under two hours, this trip offers flexibility. You could depart in the morning and arrive well before lunch, or leave in the afternoon for an evening arrival. With no designated stops, you have the freedom to pull over as needed for breaks or to refuel. Keep an eye on your fuel gauge, especially considering the estimated $16 cost, and plan your fill-up accordingly. A practical tip for this route: since much of it is on I-75, be mindful of potential traffic, especially if traveling during peak commuting hours or on weekends.
Morning Departure
Leave by 9 AM and you'll arrive before lunch.
Evening Departure
Even a 4 PM departure gets you there before dark in summer.
You can normally do this drive in one day.
You may only need one short stretch break if traffic stays light.
The halfway point lands around 50.8 miles from Clinton Township, MI, or about 1h 2m into the drive.
The longest continuous stretch on this route runs about 40.1 miles.
This is a comfortable same-day trip.
Departure
Before you leave
Start with fuel, water, and navigation already sorted so the first hour feels easy.
First stop
Around 22 miles or 31m in
Use this first pause for coffee, a restroom break, and a quick traffic check ahead.
Halfway reset
Around 50.8 miles or 1h 2m in
This is the best place for your longest stop, a real meal, and a full fuel check.
Final approach
Final hour starts around 1h 37m
Traffic, exits, and arrival timing usually matter more near Bath, MI than in the middle of the route.
Before You Leave
+
Open the route before leaving Clinton Township, MI so your first major turns are already loaded.
Day 1
Settle into the route from Clinton Township, MI
This is one driving day of about 101.6 miles and 1h 57m.
Your first comfortable stop window is around 22 miles from Clinton Township, MI.
This route can stay practical as a one-day drive if traffic stays reasonable.
The longest stretch is on Chevrolet-Buick Freeway for about 40.1 miles.
Where to Stop
Rest stops, refuel points, and overnight suggestions along this route.
Halfway Point
Midpoint
About 50.8 mi from Clinton Township, MI
· 1h 2m into the drive
Station data from NREL Alternative Fuel Stations database.
Driving Electric?
About $11 in charging
· 0 stops
· 67% less CO2
Vehicle Type
kWh
Stops
DC Fast
Home Charge
Average EV
30.5
0
$10.67
$4.88
Efficient EV
25.4
0
$8.89
$4.06
EV Truck/SUV
40.6
0
$14.22
$6.50
Gas CO2
36 kg
EV CO2
12 kg (67% less)
This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.
DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.
Travel Intel
Current conditions at both ends of the drive.
Forecast as of Apr 16, 2026
Origin
Clinton Township, MI
Night
in Clinton Township on Thursday
Local time
9:16 PM
EDT
Current temp
73°F
Showers And Thunderstorms
WSW 10 mph85% chanceLive forecast
Special Weather Statement
Special Weather Statement issued April 16 at 3:21PM EDT by NWS Grand Rapids MI
Flash Flood Warning
Flash Flood Warning issued April 16 at 1:53PM EDT until April 17 at 12:00AM EDT by NWS Gaylord MI
Destination
Bath, MI
Night
in Bath on Thursday
Local time
9:16 PM
EDT
Current temp
63°F
Unavailable
Live forecast
Seasonal Notes
Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.
Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.
Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.
Time zone
Same local time
Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.
Temperature spread
10 degrees cooler at arrival
A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.
Road read
1h 57m on the road
The weather snapshot is not static. If you are leaving later, give both cities one more quick forecast check before departure.
Weather data from the National Weather Service. Conditions may change; check closer to your travel date.
Frequently Asked Questions
The drive from Clinton Township, MI to Bath, MI covers 101.6 miles and takes about 1h 57m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are Chevrolet-Buick Freeway, I 75, Hall Road. Most of the drive stays on highways, so watch for ramps and exits.
This is a comfortable same-day trip.
The midpoint is about 50.8 miles from Clinton Township, MI. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $15.88 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
This drive requires moderate attention. Across 101.6 miles you will encounter 17 spots where lane choice or exit timing matters. Not difficult for experienced highway drivers, but worth previewing the tricky sections before you go.
The main spots that need attention: at 4.3 miles: Exit ramp - move to the correct lane early. Lane positioning matters here; at 20.1 miles: Exit ramp - move to the correct lane early. Lane positioning matters here; at 58.4 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one.
Between Clinton Township, MI and Bath, MI, road signs point toward Port Huron and Flint.
