Skip to main content

Trip from Clinton Township, MI to Rockford, MI

Compiled and reviewed by the Trip.ovh planning team at COD Solutions Oy · Last reviewed Apr 17, 2026 · Editorial standards

Drive Time

3h 15m

Distance

171.8 mi

276 km

Drive Score

8/10

Great drive

Same Day?

Yes, doable

Fuel Cost

$27

one way

EV Charging

Unknown

Best Time to Leave

Save up to 35 min
4 AM
3h 4m ★
6 AM
3h 16m
8 AM
3h 39m
10 AM
3h 24m
12 PM
3h 22m
3 PM
3h 25m
5 PM
3h 38m
8 PM
3h 9m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

Downtown Clinton Township, MI, MI

Clinton Township, MI

fish socks

Downtown Rockford, MI, MI

Rockford, MI

fish socks

Trip Overview

This 171.8-mile drive from Clinton Township, MI, to Rockford, MI, is a straightforward, highway-focused journey that can easily be completed in about 3 hours and 15 minutes. With 88% of the drive on highways, it’s designed for efficient travel, making it ideal as a single-day trip. The estimated fuel cost is around $27, and you'll encounter one main road to navigate: I-96, along with portions of Walter P Reuther Freeway and South Groesbeck Highway. This route is a solid option if you're looking for a practical way to get from the Midwest to another part of the Midwest without much fuss.

Trip Pace

Same-day drive is realistic

A same-day return is realistic if you keep stops short.

Break Rhythm

1 planned break

A short stop every 2 to 3 hours is enough for this drive.

Midpoint

85.9 miles from Clinton Township, MI

A natural place for your longest stop of the day , about 1h 38m into the drive .

Who Is This Route For?

Weekend Trip

Doable as a same-day drive at 3h 15m. Total distance: 171.8 miles.

Family Friendly

Moderate complexity with 1 natural rest stops along the way.

Solo Traveler

3h 15m drive, comfortable solo distance.

First-Time Driver

Mostly highway driving (88%). Some complex stretches to watch for.

Drive Character

Expect a largely highway-intensive experience on this route, with 88% of your travel time spent on high-speed roads. The bulk of your journey, a continuous stretch of 125.6 miles, will be on I-96. This means you'll have long, uninterrupted periods of driving, allowing for a consistent pace. While the profile is highway-focused, keep in mind that the initial and final segments may involve navigating urban and suburban surface streets before merging onto and exiting the main interstate.

Most of the miles stay on highways, which makes pacing and fuel planning easier than turn-by-turn city driving.
There are about 19 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
I 96 is the longest continuous segment at about 125.6 miles.

How Hard Is This Drive?

This is a straightforward highway drive that stays mostly on I 96 and Walter P Reuther Freeway. This route has several spots where lane changes, forks, or exits need your full attention. The trickiest moment comes around 0.3 miles in near Moravian Drive.

Driving Effort 7/10

Demanding - plan breaks and stay ahead of the key maneuvers

Balances navigation complexity with total wheel time.

This is a demanding drive. With 15 significant decision points across 171.8 miles, you will need to stay alert - especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.

Where does it get tricky?

The main spots that need attention: at 0.3 miles (Moravian Drive): Navigation decision point; at 0.4 miles (Harrington Street): Lane positioning matters here; at 1 miles (M 97 / South Groesbeck Highway): Lane positioning matters here.

Critical Maneuvers

5 of 15 key points

These are the spots where you need to pay the most attention. Preview them before you drive.

5
0.3 mi into trip | ~1m in | Moravian Drive

At end of road, turn left onto Moravian Drive

Navigation decision point

5
0.4 mi into trip | ~1m in | Harrington Street

Turn right onto Harrington Street

Lane positioning matters here

Use the right lane.
5
1 mi into trip | ~2m in | M 97 / South Groesbeck Highway

Turn right onto M 97 / South Groesbeck Highway

Lane positioning matters here

Use the straight / right lanes.
6
52.5 mi into trip | ~1h 2m in | I 96

Keep slight left at fork onto I 96

Highway fork - watch signs carefully. Lane positioning matters here

Use the straight / slight right lanes.
8
160.2 mi into trip | ~2h 58m in

Take the exit toward M 44, M 37 South: East Beltline Avenue

Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one

Use the slight right lane. Exit 38 Toward M 44, M 37 South: East Beltline Avenue

Towns Mentioned on Route Signs

Based on OSRM destination-sign hints, not a full list of every settlement the road passes.

On the drive from Clinton Township, MI to Rockford, MI, road signs begin pointing toward M 44 along the way.

M 44

160.2 mi in | ~2h 58m

Main Roads

Road Distance Duration
I 96 125.6 mi 2h 14m
Walter P Reuther Freeway 25.5 mi 27m
South Groesbeck Highway 7.3 mi 11m
East Beltline Avenue Northeast 5.7 mi 7m
Northland Drive Northeast 4.6 mi 6m
South Fremont Street Northeast 0.6 mi 1m
Harrington Street 0.6 mi 1m
East 11 Mile Road 0.5 mi <1m
Longest stretch: I 96 — 125.6 mi, about 2h 14m

Turn-by-Turn Driving Directions

Step-by-step road directions between Clinton Township, MI and Rockford, MI.

1

Start on Red Oaks Drive

289 ft · 17 sec · Red Oaks Drive
2

Turn left onto White Oaks Drive

0.2 mi · 55 sec · White Oaks Drive
3

At end of road, turn left onto Moravian Drive

0.1 mi · 16 sec · Moravian Drive
4

Turn right onto Harrington Street

0.6 mi · 1 min · Harrington Street
Use the right lane.
5

Turn right onto M 97

7.3 mi · 11 min · South Groesbeck Highway
Use the straight / right lanes.
6

Turn right onto East 11 Mile Road

0.5 mi · 59 sec · East 11 Mile Road
Use the straight / right lanes.
7

Take the ramp

0.3 mi · 37 sec
Toward I 696 West
8

Merge onto I 696

25 mi · 27 min · Walter P Reuther Freeway
Use the straight / slight right lanes.
9

Merge onto I 96

18 mi · 19 min · I 96
Use the straight / slight right lanes.
10

Keep slight left at fork onto I 96

55 mi · 58 min · I 96
Use the straight / slight right lanes.
11

Keep slight left at fork onto I 96

53 mi · 56 min · I 96
Toward I 96 West: Grand Rapids
12

Take the exit

0.4 mi · 41 sec
Exit 38 Toward M 44, M 37 South: East Beltline Avenue Use the slight right lane.
13

Turn straight onto M 44

5.7 mi · 7 min · East Beltline Avenue Northeast
Use the left lane.
14

Continue on M 44

1.8 mi · 2 min · Northland Drive Northeast
15

Turn left onto Northland Drive Northeast

2.8 mi · 3 min · Northland Drive Northeast
16

Continue on South Fremont Street Northeast

0.6 mi · 1 min · South Fremont Street Northeast
17

Turn left onto East Bridge Street Northeast

0.2 mi · 52 sec · East Bridge Street Northeast
18

Turn right

82 ft · 6 sec
19

Arrive at destination

Trip Plan

For this 3-hour and 15-minute drive, leaving in the morning is advisable to avoid potential rush hour traffic around the Detroit metropolitan area. Since it's a relatively short, highway-dominant trip, you won't necessarily need to plan for multiple extensive stops. However, factor in a quick stop for fuel and stretching, especially given the longest stretch on I-96 is over 125 miles. The $27 fuel cost is a good estimate, but always check current prices. Being a single-day journey, you have the flexibility to depart when it's most convenient for you.

Morning Departure

An early start around 7-8 AM gets you there with plenty of daylight left.

Evening Departure

A late afternoon start means arriving after dark. Morning is better.

You can normally do this drive in one day.
Plan roughly 1 meaningful break for fuel, food, and rest.
The halfway point lands around 85.9 miles from Clinton Township, MI, or about 1h 38m into the drive.
The longest continuous stretch on this route runs about 125.6 miles.

This is a comfortable same-day trip.

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 38 miles or 47m in

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 85.9 miles or 1h 38m in

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Final hour starts around 2h 37m

Traffic, exits, and arrival timing usually matter more near Rockford, MI than in the middle of the route.

Before You Leave

+

Open the route before leaving Clinton Township, MI so your first major turns are already loaded.

+

Leave with enough water and a charging cable within reach, not packed away.

+

Check your fuel range against the first long segment, especially if you are starting outside city service areas.

Day 1

Settle into the route from Clinton Township, MI

This is one driving day of about 171.8 miles and 3h 15m.

Your first comfortable stop window is around 38 miles from Clinton Township, MI.
This route can stay practical as a one-day drive if traffic stays reasonable.
Plan about 1 real break rather than only quick fuel stops.
The longest stretch is on I 96 for about 125.6 miles.

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 85.9 mi from Clinton Township, MI · 1h 38m into the drive

Downtown Dexter, MI, MI

Mid-route town

Meal stop

Dexter, MI

86 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Pacing Suggestions

Farmington, MI

Fuel and coffee

A short stop after about 38 miles helps settle the day before fatigue starts building.

Haslett, MI

Meal break

The midpoint is around 85.9 miles from Clinton Township, MI, which is a good place for a longer meal and fuel stop.

Before the longest stretch

Fuel check

Top up before I 96 if your tank is already low. That segment runs about 125.6 miles.

Arriving in Rockford, MI

The final approach into Rockford, MI usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Rockford, MI.

After long uninterrupted mileage, take five minutes before the last urban segment to reset and refocus on exits, merges, and city traffic.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Regular Gas

$26.86 one way

$53.72 round trip

$3.97/gal 25.4 MPG avg 60 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.36 $29.49 $58.98
premium $4.89 $33.06 $66.12
diesel $5.61 $37.93 $75.86

No toll roads detected on this route.

Estimated Trip Cost (one way, 1 person)

Fuel

$27

Meals

$25–$50

Total

$52–$77

Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.

Estimated CO2 emission: 60.1 kg one way. Prices: EIA weekly data, 2026-04-13.

Driving Electric?

About $18 in charging · 0 stops · 67% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 51.5 0 $18.04 $8.25
Efficient EV 43 0 $15.03 $6.87
EV Truck/SUV 68.7 0 $24.05 $11.00

Gas CO2

60 kg

EV CO2

20 kg (67% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast as of Apr 15, 2026

Origin

Clinton Township, MI

Evening in Clinton Township on Friday

Local time

7:48 PM

EDT

Current temp

49°F

Unavailable

Live forecast

Destination

Rockford, MI

Evening in Rockford on Friday

Local time

7:48 PM

EDT

Current temp

66°F

Unavailable

Live forecast

46°F

Dexter, MI

86 mi in

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.

Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.

Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

17 degrees warmer at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

3h 15m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Clinton Township, MI to Rockford, MI covers 171.8 miles and takes about 3h 15m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.

The main roads are I 96, Walter P Reuther Freeway, South Groesbeck Highway. Most of the drive stays on highways, so watch for ramps and exits.

This is a comfortable same-day trip.

The midpoint is about 85.9 miles from Clinton Township, MI. Look for rest areas, gas stations, or food options near the halfway mark.

At current regular gas prices, expect to spend about $26.86 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.

An early start around 7-8 AM gets you there with plenty of daylight left. A late afternoon start means arriving after dark. Morning is better.

Plan about 1 meaningful break for fuel, food, or rest. A short stop every 2 to 3 hours is enough for this drive.

This is a demanding drive. With 15 significant decision points across 171.8 miles, you will need to stay alert - especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.

The main spots that need attention: at 0.3 miles (Moravian Drive): Navigation decision point; at 0.4 miles (Harrington Street): Lane positioning matters here; at 1 miles (M 97 / South Groesbeck Highway): Lane positioning matters here.

On the drive from Clinton Township, MI to Rockford, MI, road signs begin pointing toward M 44 along the way.

How this page is built

Compiled by the Trip.ovh planning team at COD Solutions Oy from open government datasets — OSRM over OpenStreetMap for geometry, and EIA for fuel prices. See our methodology for refresh cadence and limitations.

Was this helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Return Trip

Rockford, MI to Clinton Township, MI

Plan the drive back the other way.

176.7 mi 3h 21m

More trips to Rockford, MI

Explore more options from Clinton Township, MI or browse trips ending in Rockford, MI.

Looking for more statewide routes? Browse MI road trips.