Skip to main content

Trip from Clinton Township, MI to Chase, MI

Data updated 0 seconds ago

Drive Time

3h 50m

Distance

200.3 mi

322 km

Drive Score

8/10

Great drive

Same Day?

Yes, doable

Fuel Cost

$31

one way

EV Charging

Loading...

station data

Best Time to Leave

Save up to 38 min
4 AM
3h 38m ★
6 AM
3h 51m
8 AM
4h 16m
10 AM
4h 0m
12 PM
3h 57m
3 PM
4h 1m
5 PM
4h 15m
8 PM
3h 43m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

Downtown Clinton Township, MI, MI

Clinton Township, MI

fish socks

Trip Overview

The drive from Clinton Township, MI to Chase, MI covers 200.3 miles and takes about 3h 50m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.

The route leans on White Oaks Drive, Moravian Drive, Cass Avenue for much of the mileage, and the overall profile is turn-heavy local drive. At current regular gas prices, budget about $31.31 one way before food or hotel costs.

Trip Pace

Same-day drive is realistic

A same-day return is realistic if you keep stops short.

Break Rhythm

1 planned break

A short stop every 2 to 3 hours is enough for this drive.

Midpoint

100.2 miles from Clinton Township, MI

A natural place for your longest stop of the day , about 1h 55m into the drive .

Loading map...

Drive Character

Expect a 3h 50m drive with frequent turns across 200.3 miles of local and secondary roads.

This route has more turning and local-road decision points than a simple highway run.
There are about 20 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
White Oaks Drive is one of the defining roads on this drive.

How Hard Is This Drive?

Expect a hands-on drive with frequent turns and local roads rather than long highway stretches. There are only a few real navigation decisions along the way.

Route Complexity 3/10

Easy - simple navigation with a manageable amount of wheel time

This is a straightforward 3h 50m drive. You will face about 0 decision points, but nothing that requires special attention if you follow navigation.

Where does it get tricky?

This route does not have any notably tricky sections. Most of the drive from Clinton Township, MI to Chase, MI is straightforward, with well-signed roads and simple exits.

Main Roads

Road Distance Duration
White Oaks Drive Unavailable Refreshing
Moravian Drive Unavailable Refreshing
Cass Avenue Unavailable Refreshing
Romeo Plank Road Unavailable Refreshing
Hall Road Unavailable Refreshing
M 59 West Unavailable Refreshing
I 75 North Unavailable Refreshing
I 75 Unavailable Refreshing

Per-road distance and duration are being refreshed from OSRM for this route.

Longest stretch: White Oaks Drive — detailed segment metrics are refreshing.

Turn-by-Turn Driving Directions

Step-by-step road directions between Clinton Township, MI and Chase, MI.

1

Start on Red Oaks Drive

289 ft · 18 sec · Red Oaks Drive
2

Turn left onto White Oaks Drive

0.2 mi · 56 sec · White Oaks Drive
3

At the end of the road, turn left onto Moravian Drive

1.2 mi · 2 min · Moravian Drive
4

At the end of the road, turn left onto Cass Avenue

1.6 mi · 2 min · Cass Avenue
5

Enter the roundabout and take exit 1 toward Romeo Plank Road

82 ft · 2 sec · Romeo Plank Road
6

Exit the roundabout onto Romeo Plank Road

0.1 mi · 11 sec · Romeo Plank Road
7

Enter the roundabout and take exit 2 toward Romeo Plank Road

92 ft · 2 sec · Romeo Plank Road
8

Exit the roundabout onto Romeo Plank Road

1.0 mi · 1 min · Romeo Plank Road
9

Turn right onto Hall Road

502 ft · 9 sec · Hall Road
10

Take the exit slight left toward M 59 West

259 ft · 9 sec · M 59 West
11

Merge slight right onto Hall Road

16 mi · 20 min · Hall Road
12

Take the exit slight right toward I 75 North: Flint

0.6 mi · 1 min · I 75 North: Flint
13

Merge slight left

33 mi · 35 min
14

Keep slight left to continue on I 75: Saginaw

51 mi · 54 min · I 75: Saginaw
15

Take the exit slight right toward US 10 West: Midland

0.2 mi · 36 sec · US 10 West: Midland
16

Continue straight

11 mi · 11 min
17

Keep slight right to continue on US 10: Clare

38 mi · 38 min · US 10: Clare
18

Take the exit slight right toward US 10 WEST, TO M 115: Ludington, Cadillac

46 mi · 1 hr · US 10 WEST, TO M 115: Ludington, Cadillac
19

Turn right onto 3rd Choice Street

489 ft · 22 sec · 3rd Choice Street
20

Arrive at your destination

Trip Plan

Morning Departure

An early start around 7-8 AM gets you there with plenty of daylight left.

Evening Departure

A late afternoon start means arriving after dark. Morning is better.

You can normally do this drive in one day.
Plan roughly 1 meaningful break for fuel, food, and rest.
The halfway point lands around 100.2 miles from Clinton Township, MI, or about 1h 55m into the drive.

This is a comfortable same-day trip.

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 80 miles or 1h 32m in

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 100.2 miles or 1h 55m in

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Final hour starts around 3h 9m

Traffic, exits, and arrival timing usually matter more near Chase, MI than in the middle of the route.

Before You Leave

+

Open the route before leaving Clinton Township, MI so your first major turns are already loaded.

+

Leave with enough water and a charging cable within reach, not packed away.

+

Check your fuel range against the first long segment, especially if you are starting outside city service areas.

Day 1

Settle into the route from Clinton Township, MI

This is one driving day of about 200.3 miles and 3h 50m.

Your first comfortable stop window is around 80 miles from Clinton Township, MI.
This route can stay practical as a one-day drive if traffic stays reasonable.
Plan about 1 real break rather than only quick fuel stops.

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 100.2 mi from Clinton Township, MI · 1h 55m into the drive

Downtown Ann Arbor, MI, MI

Mid-route town

Meal stop

Ann Arbor, MI

100 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Pacing Suggestions

Canton, MI

Fuel and coffee

A short stop after about 80 miles helps settle the day before fatigue starts building.

Ann Arbor, MI

Meal break

The midpoint is around 100.2 miles from Clinton Township, MI, which is a good place for a longer meal and fuel stop.

Arriving in Chase, MI

The final approach into Chase, MI usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Chase, MI.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Regular Gas

$31.31 one way

$62.63 round trip

$3.97/gal 25.4 MPG avg 70 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.36 $34.38 $68.76
premium $4.89 $38.55 $77.09
diesel $5.61 $44.22 $88.45

No toll roads detected on this route.

Estimated Trip Cost (one way, 1 person)

Fuel

$31

Meals

$25–$50

Total

$56–$81

Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.

Estimated CO2 emission: 70.1 kg one way. Prices: EIA weekly data, 2026-04-13.

Driving Electric?

About $21 in charging · 0 stops · 67% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 60.1 0 $21.03 $9.61
Efficient EV 50.1 0 $17.53 $8.01
EV Truck/SUV 80.1 1 $28.04 $12.82

Gas CO2

70 kg

EV CO2

23 kg (67% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast data refreshed 5 days ago

Origin

Clinton Township, MI

Late night in Clinton Township on Wednesday

Local time

12:32 AM

EDT

Current temp

48°F

Unavailable

Live forecast

Destination

Chase, MI

Late night in Chase on Wednesday

Local time

12:32 AM

EDT

Current temp

46°F

Unavailable

Live forecast

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.

Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.

Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

2 degrees cooler at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

3h 50m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Clinton Township, MI to Chase, MI covers 200.3 miles and takes about 3h 50m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are White Oaks Drive, Moravian Drive, Cass Avenue. Expect a mix of highway and local road driving.
This is a comfortable same-day trip.
The midpoint is about 100.2 miles from Clinton Township, MI. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $31.31 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
An early start around 7-8 AM gets you there with plenty of daylight left. A late afternoon start means arriving after dark. Morning is better.
Plan about 1 meaningful break for fuel, food, or rest. A short stop every 2 to 3 hours is enough for this drive.
This is a straightforward 3h 50m drive. You will face about 0 decision points, but nothing that requires special attention if you follow navigation.
This route does not have any notably tricky sections. Most of the drive from Clinton Township, MI to Chase, MI is straightforward, with well-signed roads and simple exits.
The route from Clinton Township, MI to Chase, MI does not surface many named destination signs beyond the main corridor.

Was this route helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Explore more options from Clinton Township, MI or browse trips ending in Chase, MI.

Looking for more statewide routes? Browse MI road trips.

Explore maps for Clinton Township, MI or Chase, MI on MapSof.net.