Trip from College Park, MD to Beltsville, MD

Drive Time

10m

Distance

4.3 mi

7 km

Drive Score

5/10

Practical drive

Same Day?

Yes, doable

Fuel Cost

$1

one way

Downtown Beltsville, MD, MD

Photo: Carly Dernetz

Trip Overview

The drive from College Park, MD to Beltsville, MD covers 4.3 miles and takes about 10m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.

The route leans on Baltimore Avenue, Knox Road, Powder Mill Road for much of the mileage, and the overall profile is turn-heavy local drive. The longest uninterrupted segment is about 4.2 miles on Baltimore Avenue. At current regular gas prices, budget about $0.71 one way before food or hotel costs.

Trip Pace

Same-day drive is realistic

A same-day return is realistic if you keep stops short.

Break Rhythm

0 planned breaks

A short stop every 2 to 3 hours is enough for this drive.

Midpoint

2.1 miles from College Park, MD

A natural place for your longest stop of the day , about 5m into the drive .

Drive Character

Expect a 10m drive with frequent turns across 4.3 miles of local and secondary roads.

This route has more turning and local-road decision points than a simple highway run.
There are about 4 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
Baltimore Avenue is the longest continuous segment at about 4.2 miles.

How Hard Is This Drive?

Expect a hands-on drive with frequent turns and local roads rather than long highway stretches. Navigation is very simple — set it and forget it for most of the drive. The trickiest moment comes around 0.1 miles in near US 1 / Baltimore Avenue.

Route Complexity 2/10

Very easy - short and simple to drive

The drive from College Park, MD to Beltsville, MD is easy. At 10m with 0% highway, most drivers will find it relaxed and low-stress.

Where does it get tricky?

The main spots that need attention: at 0.1 miles (US 1 / Baltimore Avenue): Lane positioning matters here; at 4.3 miles (MD 212A / Powder Mill Road): Lane positioning matters here.

Critical Maneuvers

2 of 2 key points

These are the spots where you need to pay the most attention. Preview them before you drive.

5
0.1 mi into trip | ~0m in | US 1 / Baltimore Avenue

Turn right onto US 1 / Baltimore Avenue

Lane positioning matters here

Use the none lane.
6
4.3 mi into trip | ~10m in | MD 212A / Powder Mill Road

Turn left onto MD 212A / Powder Mill Road

Lane positioning matters here

Use the left lane.

Main Roads

Road Distance Duration
Baltimore Avenue 4.2 mi 10m
Knox Road <0.1 mi <1m
Powder Mill Road <0.1 mi Refreshing

Per-road distance and duration are being refreshed from OSRM for this route.

Longest stretch: Baltimore Avenue — 4.2 mi, about 10m

Turn-by-Turn Driving Directions

Step-by-step road directions between College Park, MD and Beltsville, MD.

1

Start on Knox Road

272 ft · 15 sec · Knox Road
2

Turn right onto US 1

4.2 mi · 10 min · Baltimore Avenue
Use the none lane.
3

Turn left onto MD 212A

13 ft · 0 sec · Powder Mill Road
Use the left lane.
4

Arrive at destination

MD 212A

Trip Plan

Morning Departure

Leave by 9 AM and you'll arrive before lunch.

Evening Departure

Even a 4 PM departure gets you there before dark in summer.

You can normally do this drive in one day.
You may only need one short stretch break if traffic stays light.
The halfway point lands around 2.1 miles from College Park, MD, or about 5m into the drive.
The longest continuous stretch on this route runs about 4.2 miles.

This is a comfortable same-day trip.

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 4.3 miles or 10m in

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 2.1 miles or 5m in

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Final hour starts around 8m

Traffic, exits, and arrival timing usually matter more near Beltsville, MD than in the middle of the route.

Before You Leave

+

Open the route before leaving College Park, MD so your first major turns are already loaded.

+

Leave with enough water and a charging cable within reach, not packed away.

+

Check your fuel range against the first long segment, especially if you are starting outside city service areas.

Day 1

Settle into the route from College Park, MD

This is one driving day of about 4.3 miles and 10m.

Your first comfortable stop window is around 80 miles from College Park, MD.
This route can stay practical as a one-day drive if traffic stays reasonable.
You may only need one short stretch stop if conditions stay smooth.
The longest stretch is on Baltimore Avenue for about 4.2 miles.

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 2.1 mi from College Park, MD · 5m into the drive

Downtown Staten Island, NY, NY

Mid-route town

Meal stop

Staten Island, NY

2 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Pacing Suggestions

Staten Island, NY

Fuel and coffee

A short stop after about 4.3 miles helps settle the day before fatigue starts building.

Staten Island, NY

Meal break

The midpoint is around 2.1 miles from College Park, MD, which is a good place for a longer meal and fuel stop.

Arriving in Beltsville, MD

The final approach into Beltsville, MD usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Beltsville, MD.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Regular Gas

$0.71 one way

$1.42 round trip

$4.20/gal 25.4 MPG avg 2 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.60 $0.78 $1.56
premium $4.92 $0.83 $1.67
diesel $5.64 $0.96 $1.91

No toll roads detected on this route.

Estimated Trip Cost (one way, 1 person)

Fuel

$1

Meals

$25–$50

Total

$26–$51

Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.

Estimated CO2 emission: 1.5 kg one way. Prices: EIA weekly data, 2026-04-06.

Driving Electric?

About $0 in charging · 0 stops · 50% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 1.3 0 $0.45 $0.21
Efficient EV 1.1 0 $0.38 $0.17
EV Truck/SUV 1.7 0 $0.60 $0.28

Gas CO2

2 kg

EV CO2

1 kg (50% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Local time and weather at both ends of the drive

Current conditions at both ends of the drive. If you're planning ahead, check the forecast closer to your travel date.

Forecast data refreshed 2 days ago

Origin

College Park, MD

Late night in College Park on Sunday

Local time

2:27 AM

EDT

Current temp

89°F

Forecast unavailable right now

EDT Live forecast

Destination

Beltsville, MD

Late night in Beltsville on Sunday

Local time

2:27 AM

EDT

Current temp

68°F

Forecast unavailable right now

EDT Live forecast

Along the Route

59°F

Staten Island, NY

2 mi in

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.

Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.

Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

21 degrees cooler at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

10m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Frequently Asked Questions

The drive from College Park, MD to Beltsville, MD covers 4.3 miles and takes about 10m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are Baltimore Avenue, Knox Road, Powder Mill Road. Expect a mix of highway and local road driving.
This is a comfortable same-day trip.
The midpoint is about 2.1 miles from College Park, MD. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $0.71 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
The drive from College Park, MD to Beltsville, MD is easy. At 10m with 0% highway, most drivers will find it relaxed and low-stress.
The main spots that need attention: at 0.1 miles (US 1 / Baltimore Avenue): Lane positioning matters here; at 4.3 miles (MD 212A / Powder Mill Road): Lane positioning matters here.
The route from College Park, MD to Beltsville, MD does not surface many named destination signs beyond the main corridor.

Was this route helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Explore more options from College Park, MD or browse trips ending in Beltsville, MD.

Looking for more statewide routes? Browse MD road trips.

Explore maps for College Park, MD or Beltsville, MD on MapSof.net.