Origin
Co on Rapids, MN
Afternoon in Co on Rapids on Sunday
Local time
4:23 PM
CDT
Current temp
40°F
Unavailable
Live forecast
Trip from Co on Rapids, MN to Albertville, MN
Drive Time
28m
Distance
23.3 mi
37 km
Drive Score
6/10
Good drive
Same Day?
Yes, doable
Fuel Cost
$3
one way
EV Charging
Loading...
station data
Best Time to Leave
4 AM
0h 26m
★
6 AM
0h 29m
8 AM
0h 34m
10 AM
0h 31m
12 PM
0h 30m
3 PM
0h 31m
5 PM
0h 34m
8 PM
0h 27m
Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.
Co on Rapids, MN
Tom Fisk
Albertville, MN
Tom Fisk
Trip Overview
If you are looking for a quick and straightforward commute, the 23.3-mile trip from Coon Rapids to Albertville is an ideal choice. Expect to spend about 28 minutes behind the wheel, making this a perfect candidate for a single-day excursion. You will primarily utilize MN-610 and I-94 W to navigate between these two Midwestern locations. Budgeting roughly $3 for fuel should cover your travel costs, keeping this trip highly economical. Because the duration is so brief, there is no need to plan for overnight stays or complex logistics. Whether you are traveling for business or a quick visit, this route offers a no-fuss transit experience.
Trip Pace
Same-day drive is realistic
A same-day return is realistic if you keep stops short.
Break Rhythm
0 planned breaks
A short stop every 2 to 3 hours is enough for this drive.
Midpoint
11.6 miles from Co on Rapids, MN
A natural place for your longest stop of the day , about 15m into the drive .
Drive Character
This highway-focused drive keeps you moving efficiently, with 88% of your journey spent on high-speed roads. You will find the most consistent pace during the 10.6-mile stretch along MN-610, which represents the longest uninterrupted segment of the trip. The transition from the local East River Road onto the major interstate network shifts the feel of the drive from residential to high-capacity transit. Expect a functional, interstate-heavy experience that prioritizes speed and directness over winding, technical paths. Staying focused is key, as the route is designed to get you to your destination with minimal distractions.
Most of the miles stay on highways, which makes pacing and fuel planning easier than turn-by-turn city driving.
There are about 13 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
MN-610 is the longest continuous segment at about 10.6 miles.
How Hard Is This Drive?
This is a straightforward highway drive that stays mostly on MN-610 and I-94 W. This route has several spots where lane changes, forks, or exits need your full attention. The trickiest moment comes around 1.5 miles in.
Route Complexity
8/10
Demanding - plan breaks and stay ahead of the key maneuvers
This is a demanding drive. With 10 significant decision points across 23.3 miles, you will need to stay alert — especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.
Where does it get tricky?
The main spots that need attention: at 1.5 miles: Lane positioning matters here; at 1.9 miles (MN 610 / MN-610): Merge point - match speed before joining. Lane positioning matters here; at 12.5 miles (I 94 / I-94 W): Merge point - match speed before joining. Lane positioning matters here.
Critical Maneuvers
5 of 10 key pointsThese are the spots where you need to pay the most attention. Preview them before you drive.
7
1.5 mi into trip
|
~3m in
Turn left toward MN 610 West
Lane positioning matters here
Use the left lane.
Toward MN 610 West
5
1.9 mi into trip
|
~4m in
|
MN 610 / MN-610
Merge onto MN 610 / MN-610
Merge point - match speed before joining. Lane positioning matters here
Use the none lane.
5
12.5 mi into trip
|
~16m in
|
I 94 / I-94 W
Merge onto I 94 / I-94 W
Merge point - match speed before joining. Lane positioning matters here
Use the none / straight / slight right lanes.
8
22.4 mi into trip
|
~27m in
Take the exit toward CR 37, CR 137, CR 19: Albertville
Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one
Use the slight right lane.
Exit 202-201
Toward CR 37, CR 137, CR 19: Albertville
10
22.6 mi into trip
|
~27m in
Keep slight right at fork toward CR 37, CR 137
Highway fork - watch signs carefully. Lane positioning matters here. Multiple destination signs - pick the right one
Use the slight left / slight right lanes.
Exit 202
Toward CR 37, CR 137
Main Roads
| Road | Distance | Duration |
|---|---|---|
| MN-610 | 10.6 mi | 12m |
| I-94 W | 9.9 mi | 10m |
| East River Road | 1.4 mi | 2m |
| 61st Street Northeast | 0.2 mi | <1m |
| 60th Street Northeast | 0.1 mi | <1m |
| Mississippi Boulevard Northwest | 0.1 mi | <1m |
| Main Avenue Northeast | <0.1 mi | <1m |
Longest stretch:
MN-610
— 10.6 mi, about 12m
Turn-by-Turn Driving Directions
Step-by-step road directions between Co on Rapids, MN and Albertville, MN.
1
Start on Mississippi Boulevard Northwest
0.1 mi
·
30 sec
·
Mississippi Boulevard Northwest
2
Turn left onto CR 1
1.4 mi
·
2 min
·
East River Road
Use the none lane.
3
Turn left
0.4 mi
·
59 sec
Toward MN 610 West
Use the left lane.
4
Merge onto MN 610
11 mi
·
12 min
·
MN-610
Use the none lane.
5
Merge onto I 94
9.9 mi
·
10 min
·
I-94 W
Use the none / straight / slight right lanes.
6
Take the exit
0.2 mi
·
15 sec
Exit 202-201
Toward CR 37, CR 137, CR 19: Albertville
Use the slight right lane.
7
Keep slight right at fork
0.3 mi
·
25 sec
Exit 202
Toward CR 37, CR 137
Use the slight left / slight right lanes.
8
Turn left onto CR 137
523 ft
·
9 sec
·
60th Street Northeast
9
Continue on CR 37
0.2 mi
·
30 sec
·
61st Street Northeast
10
Turn left onto Main Avenue Northeast
192 ft
·
6 sec
·
Main Avenue Northeast
11
Turn right onto 60th Street Northeast
205 ft
·
14 sec
·
60th Street Northeast
12
Turn left
85 ft
·
6 sec
13
Arrive at destination
Trip Plan
Since this is a short, 28-minute drive, you have plenty of flexibility regarding your departure time, though it is wise to monitor I-94 traffic patterns before you head out. You will not need to plan for any formal stops along the way, allowing you to reach Albertville in one continuous push. Keep your $3 fuel budget in mind, but rest assured that your vehicle will handle this distance easily without requiring mid-trip refueling. Because the route relies so heavily on major highways, keep a close watch on signage when transitioning between MN-610 and I-94 W. Taking advantage of the route's simplicity means you can focus on arriving at your destination refreshed and on schedule.
Morning Departure
Leave by 9 AM and you'll arrive before lunch.
Evening Departure
Even a 4 PM departure gets you there before dark in summer.
You can normally do this drive in one day.
You may only need one short stretch break if traffic stays light.
The halfway point lands around 11.6 miles from Co on Rapids, MN, or about 15m into the drive.
The longest continuous stretch on this route runs about 10.6 miles.
This is a comfortable same-day trip.
Departure
Before you leave
Start with fuel, water, and navigation already sorted so the first hour feels easy.
First stop
Around 23.3 miles or 28m in
Use this first pause for coffee, a restroom break, and a quick traffic check ahead.
Halfway reset
Around 11.6 miles or 15m in
This is the best place for your longest stop, a real meal, and a full fuel check.
Final approach
Final hour starts around 24m
Traffic, exits, and arrival timing usually matter more near Albertville, MN than in the middle of the route.
Before You Leave
+
Open the route before leaving Co on Rapids, MN so your first major turns are already loaded.
+
Leave with enough water and a charging cable within reach, not packed away.
+
Check your fuel range against the first long segment, especially if you are starting outside city service areas.
Day 1
Settle into the route from Co on Rapids, MN
This is one driving day of about 23.3 miles and 28m.
Your first comfortable stop window is around 80 miles from Co on Rapids, MN.
This route can stay practical as a one-day drive if traffic stays reasonable.
You may only need one short stretch stop if conditions stay smooth.
The longest stretch is on MN-610 for about 10.6 miles.
Where to Stop
Rest stops, refuel points, and overnight suggestions along this route.
Halfway Point
Midpoint
About 11.6 mi from Co on Rapids, MN · 15m into the drive
Mid-route town
Meal stop
12 mi into the route
Best for: Lunch, fuel, and a longer reset
This sits close to the middle of the route, so it works well for the longest stop of the day.
Pacing Suggestions
Fuel and coffee
A short stop after about 23.3 miles helps settle the day before fatigue starts building.
Meal break
The midpoint is around 11.6 miles from Co on Rapids, MN, which is a good place for a longer meal and fuel stop.
Arriving in Albertville, MN
The final approach into Albertville, MN usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.
Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Albertville, MN.
These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.
Fuel & Cost
Regular Gas
$3.33 one way
$6.67 round trip
$3.63/gal
25.4 MPG avg
8 kg CO2
| Fuel Type | $/gal | One Way | Round Trip |
|---|---|---|---|
| midgrade | $3.92 | $3.60 | $7.19 |
| premium | $4.39 | $4.03 | $8.06 |
| diesel | $5.64 | $5.18 | $10.35 |
No toll roads detected on this route.
Estimated Trip Cost (one way, 1 person)
Fuel
$3
Meals
$25–$50
Total
$28–$53
Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.
Estimated CO2 emission: 8.2 kg one way. Prices: EIA weekly data, 2026-04-06.
Driving Electric?
About $2 in charging · 0 stops · 63% less CO2
| Vehicle Type | kWh | Stops | DC Fast | Home Charge |
|---|---|---|---|---|
| Average EV | 7 | 0 | $2.45 | $1.12 |
| Efficient EV | 5.8 | 0 | $2.04 | $0.93 |
| EV Truck/SUV | 9.3 | 0 | $3.26 | $1.49 |
Gas CO2
8 kg
EV CO2
3 kg (63% less)
This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.
DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.
Travel Intel
Current conditions at both ends of the drive.
Destination
Albertville, MN
Afternoon in Albertville on Sunday
Local time
4:23 PM
CDT
Current temp
38°F
Unavailable
Live forecast
Seasonal Notes
Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.
Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.
Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.
Time zone
Same local time
Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.
Temperature spread
2 degrees cooler at arrival
A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.
Road read
28m on the road
Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.
Weather data from the National Weather Service. Conditions may change; check closer to your travel date.
Frequently Asked Questions
The drive from Co on Rapids, MN to Albertville, MN covers 23.3 miles and takes about 28m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are MN-610, I-94 W, East River Road. Most of the drive stays on highways, so watch for ramps and exits.
This is a comfortable same-day trip.
The midpoint is about 11.6 miles from Co on Rapids, MN. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $3.33 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
This is a demanding drive. With 10 significant decision points across 23.3 miles, you will need to stay alert — especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.
The main spots that need attention: at 1.5 miles: Lane positioning matters here; at 1.9 miles (MN 610 / MN-610): Merge point - match speed before joining. Lane positioning matters here; at 12.5 miles (I 94 / I-94 W): Merge point - match speed before joining. Lane positioning matters here.
The route from Co on Rapids, MN to Albertville, MN does not surface many named destination signs beyond the main corridor.
Was this route helpful?
Thanks for your feedback!
Your tip has been submitted. Thanks!
/500
Recent Tips
·
Explore More
Continue From Albertville, MN
More trips to Albertville, MN
Explore more options from Co on Rapids, MN or browse trips ending in Albertville, MN.
Looking for more statewide routes? Browse MN road trips.
Explore maps for Co on Rapids, MN or Albertville, MN on MapSof.net.