Trip from Dayton, MI to Bertrand, MI

Data updated 0 seconds ago

Drive Time

17m

Distance

11.8 mi

19 km

Drive Score

5/10

Practical drive

Same Day?

Yes, doable

Fuel Cost

$2

one way

EV Charging

Loading...

station data

Best Time to Leave

4 AM

0h 16m ★

6 AM

0h 17m

8 AM

0h 21m

10 AM

0h 19m

12 PM

0h 18m

3 PM

0h 19m

5 PM

0h 20m

8 PM

0h 17m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

Best Time Drive vs Fly

Google Maps Waze Apple Maps

Download GPX

Trip Overview

The drive from Dayton, MI to Bertrand, MI covers 11.8 miles and takes about 17m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.

The route leans on Pulaski Highway, Bond Street, Dayton Road for much of the mileage, and the overall profile is turn-heavy local drive. The longest uninterrupted segment is about 9.4 miles on Pulaski Highway. At current regular gas prices, budget about $1.84 one way before food or hotel costs.

Trip Pace

Same-day drive is realistic

A same-day return is realistic if you keep stops short.

Break Rhythm

0 planned breaks

A short stop every 2 to 3 hours is enough for this drive.

Midpoint

5.9 miles from Dayton, MI

A natural place for your longest stop of the day , about 8m into the drive .

Loading map...

Drive Character

Expect a 17m drive with frequent turns across 11.8 miles of local and secondary roads.

This route has more turning and local-road decision points than a simple highway run.

There are about 4 navigation steps in the underlying route data, so the final approach matters more than the middle miles.

Pulaski Highway is the longest continuous segment at about 9.4 miles.

How Hard Is This Drive?

Expect a hands-on drive with frequent turns and local roads rather than long highway stretches. Navigation is very simple — set it and forget it for most of the drive. The trickiest moment comes around 0.4 miles in near US 12 / Pulaski Highway.

Route Complexity 1/10

Very easy - short and simple to drive

The drive from Dayton, MI to Bertrand, MI is easy. At 17m with 0% highway, most drivers will find it relaxed and low-stress.

Where does it get tricky?

The main spots that need attention: at 0.4 miles (US 12 / Pulaski Highway): Navigation decision point; at 9.9 miles (Bond Street): Navigation decision point.

Critical Maneuvers

2 of 2 key points

These are the spots where you need to pay the most attention. Preview them before you drive.

3

0.4 mi into trip | ~1m in | US 12 / Pulaski Highway

Turn left onto US 12 / Pulaski Highway

Navigation decision point

4

9.9 mi into trip | ~14m in | Bond Street

Turn right onto Bond Street

Navigation decision point

Main Roads

Road	Distance	Duration
Pulaski Highway	9.4 mi	12m
Bond Street	1.9 mi	3m
Dayton Road	0.4 mi	1m

Longest stretch: Pulaski Highway — 9.4 mi, about 12m

Turn-by-Turn Driving Directions

Step-by-step road directions between Dayton, MI and Bertrand, MI.

1

Start on Dayton Road

0.4 mi · 1 min · Dayton Road

2

Turn left onto US 12

9.4 mi · 12 min · Pulaski Highway

3

Turn right onto Bond Street

1.9 mi · 3 min · Bond Street

4

Arrive at destination

Bond Street

Trip Plan

Morning Departure

Leave by 9 AM and you'll arrive before lunch.

Evening Departure

Even a 4 PM departure gets you there before dark in summer.

You can normally do this drive in one day.

You may only need one short stretch break if traffic stays light.

The halfway point lands around 5.9 miles from Dayton, MI, or about 8m into the drive.

The longest continuous stretch on this route runs about 9.4 miles.

This is a comfortable same-day trip.

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 11.8 miles or 17m in

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 5.9 miles or 8m in

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Final hour starts around 14m

Traffic, exits, and arrival timing usually matter more near Bertrand, MI than in the middle of the route.

Before You Leave

+

Open the route before leaving Dayton, MI so your first major turns are already loaded.

+

Leave with enough water and a charging cable within reach, not packed away.

+

Check your fuel range against the first long segment, especially if you are starting outside city service areas.

Day 1

Settle into the route from Dayton, MI

This is one driving day of about 11.8 miles and 17m.

Your first comfortable stop window is around 80 miles from Dayton, MI.

This route can stay practical as a one-day drive if traffic stays reasonable.

You may only need one short stretch stop if conditions stay smooth.

The longest stretch is on Pulaski Highway for about 9.4 miles.

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 5.9 mi from Dayton, MI · 8m into the drive

Mid-route town

Meal stop

Chicago, IL

6 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Pacing Suggestions

Chicago, IL

Fuel and coffee

A short stop after about 11.8 miles helps settle the day before fatigue starts building.

Chicago, IL

Meal break

The midpoint is around 5.9 miles from Dayton, MI, which is a good place for a longer meal and fuel stop.

Arriving in Bertrand, MI

The final approach into Bertrand, MI usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Bertrand, MI.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Regular Gas

$1.84 one way

$3.69 round trip

$3.97/gal 25.4 MPG avg 4 kg CO₂

Fuel Type	$/gal	One Way	Round Trip
midgrade	$4.36	$2.03	$4.05
premium	$4.89	$2.27	$4.54
diesel	$5.61	$2.61	$5.21

No toll roads detected on this route.

Estimated Trip Cost (one way, 1 person)

Fuel

$2

Meals

$25–$50

Total

$27–$52

Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.

Estimated CO2 emission: 4.1 kg one way. Prices: EIA weekly data, 2026-04-13.

Driving Electric?

About $1 in charging · 0 stops · 75% less CO₂

Vehicle Type	kWh	DC Fast	Home Charge
Average EV	3.5	$1.24	$0.57
Efficient EV	3	$1.03	$0.47
EV Truck/SUV	4.7	$1.65	$0.76

Gas CO2

4 kg

EV CO2

1 kg (75% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast data refreshed 1 day ago

Origin

Dayton, MI

Morning in Dayton on Wednesday

Local time

7:48 AM

EDT

Current temp

64°F

Slight Chance Showers And Thunderstorms

SW 15 mph 41% chance Live forecast

Severe Thunderstorm Warning

Severe Thunderstorm Warning issued April 14 at 12:49AM EDT until April 14 at 1:15AM EDT by NWS Grand Rapids MI

Flash Flood Warning

Flash Flood Warning issued April 14 at 12:34AM EDT until April 14 at 5:30AM EDT by NWS Gaylord MI

Destination

Bertrand, MI

Morning in Bertrand on Wednesday

Local time

7:48 AM

EDT

Current temp

75°F

Unavailable

Live forecast

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.

Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.

Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

11 degrees warmer at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

17m on the road

The weather snapshot is not static. If you are leaving later, give both cities one more quick forecast check before departure.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Dayton, MI to Bertrand, MI covers 11.8 miles and takes about 17m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.

The main roads are Pulaski Highway, Bond Street, Dayton Road. Expect a mix of highway and local road driving.

This is a comfortable same-day trip.

The midpoint is about 5.9 miles from Dayton, MI. Look for rest areas, gas stations, or food options near the halfway mark.

At current regular gas prices, expect to spend about $1.84 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.

Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.

The drive from Dayton, MI to Bertrand, MI is easy. At 17m with 0% highway, most drivers will find it relaxed and low-stress.

The main spots that need attention: at 0.4 miles (US 12 / Pulaski Highway): Navigation decision point; at 9.9 miles (Bond Street): Navigation decision point.

The route from Dayton, MI to Bertrand, MI does not surface many named destination signs beyond the main corridor.

Was this route helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Continue From Bertrand, MI

Detroit, MI 199.6 mi · 3h 51m Lansing, MI 135.5 mi · 2h 42m

Explore more options from Dayton, MI or browse trips ending in Bertrand, MI.

Looking for more statewide routes? Browse MI road trips.

Explore maps for Dayton, MI or Bertrand, MI on MapSof.net.