Skip to main content

Trip from Deer Park, MD to Carrollwood, MD

Last recalculated Apr 17, 2026

Drive Time

49m

Distance

31.8 mi

51 km

Drive Score

6/10

Good drive

Same Day?

Yes, doable

Fuel Cost

$5

one way

EV Charging

Unknown

Best Time to Leave

Save up to 12 min
4 AM
0h 46m ★
6 AM
0h 50m
8 AM
0h 58m
10 AM
0h 53m
12 PM
0h 52m
3 PM
0h 53m
5 PM
0h 58m
8 PM
0h 47m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

Downtown Deer Park, MD, MD

Deer Park, MD

Muzin Kahraman

Trip Overview

The drive from Deer Park, MD to Carrollwood, MD covers 31.8 miles and takes about 49m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.

The route leans on Baltimore Beltway, Northwest Expressway, Eastern Boulevard for much of the mileage, and the overall profile is turn-heavy local drive. The longest uninterrupted segment is about 17.7 miles on Baltimore Beltway. At current regular gas prices, budget about $5.27 one way before food or hotel costs.

Who Is This Route For?

Weekend Trip

Doable as a same-day drive at 49m. Total distance: 31.8 miles.

Family Friendly

Moderate complexity with 0 natural rest stops along the way.

Solo Traveler

49m drive, comfortable solo distance.

EV Driver

0 DC fast chargers along the route. Coverage: unknown.

Scenic Drive

Turn-heavy local drive route profile.

Drive Character

Expect a 49m drive with frequent turns across 31.8 miles of local and secondary roads.

This route has more turning and local-road decision points than a simple highway run.
There are about 19 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
Baltimore Beltway is the longest continuous segment at about 17.7 miles.

How Hard Is This Drive?

Expect a hands-on drive with frequent turns and local roads rather than long highway stretches. This route has several spots where lane changes, forks, or exits need your full attention. The trickiest moment comes around 6.9 miles in.

Driving Effort 9/10

Focused - lots of decisions in a short distance, but it is over quickly

Balances navigation complexity with total wheel time.

This is a short but busy drive. With 11 decision points packed into just 31.8 miles, you will need to pay attention to lane changes and exits — but the whole thing is over in 49m.

Where does it get tricky?

The main spots that need attention: at 6.9 miles: Highway fork - watch signs carefully. Lane positioning matters here; at 7.6 miles (I 695 / Baltimore Beltway): Merge point - match speed before joining. Lane positioning matters here; at 21.1 miles (I 695 / Baltimore Beltway): Highway fork - watch signs carefully. Lane positioning matters here.

Critical Maneuvers

5 of 11 key points

These are the spots where you need to pay the most attention. Preview them before you drive.

8
6.9 mi into trip | ~11m in

Keep slight left at fork toward I 695 East: Towson

Highway fork - watch signs carefully. Lane positioning matters here

Use the slight left lane. Exit 1A Toward I 695 East: Towson
5
7.6 mi into trip | ~13m in | I 695 / Baltimore Beltway

Merge onto I 695 / Baltimore Beltway

Merge point - match speed before joining. Lane positioning matters here

Use the straight / slight right lanes.
6
21.1 mi into trip | ~31m in | I 695 / Baltimore Beltway

Keep slight right at fork onto I 695 / Baltimore Beltway

Highway fork - watch signs carefully. Lane positioning matters here

Use the straight / slight right lanes.
7
25.3 mi into trip | ~37m in

Take the exit toward US 40 East: Aberdeen

Exit ramp - move to the correct lane early. Lane positioning matters here

Use the right lane. Exit 35B Toward US 40 East: Aberdeen
6
26.6 mi into trip | ~39m in

Take the exit toward MD 700

Exit ramp - move to the correct lane early. Lane positioning matters here

Use the right lane. Toward MD 700

Main Roads

Road Distance Duration
Baltimore Beltway 17.7 mi 24m
Northwest Expressway 3.3 mi 4m
Eastern Boulevard 2.1 mi 3m
Martin Boulevard 1.8 mi 3m
Lakeside Boulevard 1.3 mi 2m
Pulaski Highway 1.2 mi 1m
Dolfield Road 1 mi 2m
Carroll Island Road 0.7 mi 1m
Longest stretch: Baltimore Beltway — 17.7 mi, about 24m

Turn-by-Turn Driving Directions

Step-by-step road directions between Deer Park, MD and Carrollwood, MD.

1

Start on Dolfield Road

1.0 mi · 2 min · Dolfield Road
2

Turn right onto Lakeside Boulevard

1.3 mi · 2 min · Lakeside Boulevard
3

Turn left onto Owings Mills Boulevard

0.6 mi · 1 min · Owings Mills Boulevard
4

Take the ramp

0.7 mi · 1 min
Toward I 795 South: Baltimore
5

Merge onto I 795

3.3 mi · 4 min · Northwest Expressway
6

Keep slight left at fork

0.7 mi · 1 min
Exit 1A Toward I 695 East: Towson Use the slight left lane.
7

Merge onto I 695

13 mi · 18 min · Baltimore Beltway
Use the straight / slight right lanes.
8

Keep slight right at fork onto I 695

4.2 mi · 5 min · Baltimore Beltway
Use the straight / slight right lanes.
9

Take the exit

0.1 mi · 19 sec
Exit 35B Toward US 40 East: Aberdeen Use the right lane.
10

Merge onto US 40

1.2 mi · 1 min · Pulaski Highway
11

Take the exit

0.2 mi · 16 sec
Toward MD 700 Use the right lane.
12

Continue on MD 700

1.8 mi · 3 min · Martin Boulevard
13

Turn straight

0.1 mi · 22 sec
Toward MD 150 East: Chase
14

Turn straight onto MD 150

2.1 mi · 3 min · Eastern Boulevard
Use the straight lane.
15

Turn slight right

152 ft · 8 sec
16

Turn slight right onto Carroll Island Road

0.7 mi · 1 min · Carroll Island Road
17

Turn slight right onto Nollmeyer Road

0.2 mi · 46 sec · Nollmeyer Road
18

Turn right onto Dublin Hill Road

256 ft · 11 sec · Dublin Hill Road
19

Arrive at destination

Dublin Hill Road

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 15.9 mi from Deer Park, MD · 24m into the drive

census-designated place in Baltimore County, Maryland, United States

Mid-route town

Meal stop

Parkville, MD

16 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Pacing Suggestions

Essex, MD

Fuel and coffee

A short stop after about 31.8 miles helps settle the day before fatigue starts building.

Towson, MD

Meal break

The midpoint is around 15.9 miles from Deer Park, MD, which is a good place for a longer meal and fuel stop.

Arriving in Carrollwood, MD

Allow a few extra minutes for the final approach into Carrollwood, MD if you are unfamiliar with the area.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Regular Gas

$5.27 one way

$10.54 round trip

$4.21/gal 25.4 MPG avg 11 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.61 $5.77 $11.55
premium $4.93 $6.17 $12.33
diesel $5.61 $7.02 $14.04

No toll roads detected on this route.

Drive Cost (one way)

Fuel

$5

Estimated CO2 emission: 11.1 kg one way. Prices: EIA weekly data, 2026-04-13.

Driving Electric?

About $3 in charging · 0 stops · 64% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 9.5 0 $3.34 $1.53
Efficient EV 8 0 $2.78 $1.27
EV Truck/SUV 12.7 0 $4.45 $2.04

Gas CO2

11 kg

EV CO2

4 kg (64% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast as of Apr 12, 2026

Origin

Deer Park, MD

Late night in Deer Park on Friday

Local time

12:20 AM

EDT

Current temp

85°F

Unavailable

Live forecast

Destination

Carrollwood, MD

Late night in Carrollwood on Friday

Local time

12:20 AM

EDT

Current temp

51°F

Unavailable

Live forecast

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

34 degrees cooler at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

49m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Deer Park, MD to Carrollwood, MD covers 31.8 miles and takes about 49m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are Baltimore Beltway, Northwest Expressway, Eastern Boulevard. Expect a mix of highway and local road driving.
This is a comfortable same-day trip.
The midpoint is about 15.9 miles from Deer Park, MD. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $5.27 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
This is a short but busy drive. With 11 decision points packed into just 31.8 miles, you will need to pay attention to lane changes and exits — but the whole thing is over in 49m.
The main spots that need attention: at 6.9 miles: Highway fork - watch signs carefully. Lane positioning matters here; at 7.6 miles (I 695 / Baltimore Beltway): Merge point - match speed before joining. Lane positioning matters here; at 21.1 miles (I 695 / Baltimore Beltway): Highway fork - watch signs carefully. Lane positioning matters here.
The route from Deer Park, MD to Carrollwood, MD does not surface many named destination signs beyond the main corridor.

Was this helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500