Trip from Elk Plain, WA to Redmond, WA

Drive Time

1h 17m

Distance

53.6 mi

86 km

Drive Score

8/10

Great drive

Same Day?

Yes, doable

Fuel Cost

$11

one way

EV Charging

Loading...

station data

Best Time to Leave

Save up to 19 min
4 AM
1h 11m ★
6 AM
1h 18m
8 AM
1h 30m
10 AM
1h 22m
12 PM
1h 21m
3 PM
1h 22m
5 PM
1h 29m
8 PM
1h 14m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

Downtown Elk Plain, WA, WA

Elk Plain, WA

JOHN CALLERY

Downtown Redmond, WA, WA

Redmond, WA

Harrison Reilly

Trip Overview

If you are planning to travel from Elk Plain to Redmond, you are looking at a 53.6-mile journey that typically takes about 1 hour and 17 minutes to complete. This trip is well-suited for a single-day excursion, as it is a straightforward connection within the Pacific Coast region of Washington. You can expect to spend approximately $11 on fuel, making it a budget-friendly option for your schedule. Because the route is relatively short, you won't need to worry about overnight accommodations or complicated logistics. It serves as a practical, highway-focused link between these two locations, allowing for an efficient transit. Whether you are traveling for business or a quick visit, this drive provides a consistent experience without the need for multiple stops.

Trip Pace

Same-day drive is realistic

A same-day return is realistic if you keep stops short.

Break Rhythm

0 planned breaks

A short stop every 2 to 3 hours is enough for this drive.

Midpoint

26.8 miles from Elk Plain, WA

A natural place for your longest stop of the day , about 41m into the drive .

Drive Character

This drive is heavily reliant on major corridors, with 77% of the journey spent on highways. You will navigate via Canyon Road East and the Valley Freeway before transitioning onto I-405 to reach your destination. Expect a fast-paced experience, as the longest uninterrupted stretch spans 19.7 miles on the Valley Freeway. The road profile is distinctly highway-focused, prioritizing speed and connectivity over winding scenic detours. You should anticipate a fairly consistent drive that relies on these primary arteries to move you efficiently through the region.

Most of the miles stay on highways, which makes pacing and fuel planning easier than turn-by-turn city driving.
There are about 21 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
Valley Freeway is the longest continuous segment at about 19.7 miles.

How Hard Is This Drive?

This is a straightforward highway drive that stays mostly on Valley Freeway and I 405. This route has several spots where lane changes, forks, or exits need your full attention. The trickiest moment comes around 14.8 miles in.

Route Complexity 10/10

High effort - long or complex enough to need steady focus all day

This is a demanding drive. With 18 significant decision points across 53.6 miles, you will need to stay alert — especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.

Where does it get tricky?

The main spots that need attention: at 14.8 miles: Highway fork - watch signs carefully. Lane positioning matters here. Multiple destination signs - pick the right one; at 47.2 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one; at 47.6 miles: Highway fork - watch signs carefully. Lane positioning matters here. Multiple destination signs - pick the right one.

Critical Maneuvers

5 of 18 key points

These are the spots where you need to pay the most attention. Preview them before you drive.

8
14.8 mi into trip | ~25m in

Keep slight right at fork toward WA 167 North, WA 410 East: Seattle, Yakima

Highway fork - watch signs carefully. Lane positioning matters here. Multiple destination signs - pick the right one

Use the straight / right lanes. Toward WA 167 North, WA 410 East: Seattle, Yaki...
8
47.2 mi into trip | ~1h 7m in

Take the exit toward WA 520: Seattle, Redmond

Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one

Use the straight / slight right lanes. Exit 14 Toward WA 520: Seattle, Redmond
8
47.6 mi into trip | ~1h 8m in

Keep slight right at fork toward WA 520 East: 124th Avenue Northeast, Redmond

Highway fork - watch signs carefully. Lane positioning matters here. Multiple destination signs - pick the right one

Use the slight right lane. Toward WA 520 East: 124th Avenue Northeast, Red...
8
47.7 mi into trip | ~1h 8m in

Keep slight left at fork toward 124th Avenue Northeast

Highway fork - watch signs carefully. Lane positioning matters here

Use the slight left lane. Toward 124th Avenue Northeast
7
53.5 mi into trip | ~1h 17m in | WA 202 / 164th Avenue Northeast

Turn left onto WA 202 / 164th Avenue Northeast

Lane positioning matters here

Use the left lane.

Towns Along This Route

Between Elk Plain, WA and Redmond, WA, road signs point toward Yakima and 124Th Avenue Northeast.

Yakima

14.8 mi in | ~25m

124Th Avenue Northeast

47.7 mi in | ~1h 8m

Main Roads

Road Distance Duration
Valley Freeway 19.7 mi 24m
I 405 11.2 mi 14m
Canyon Road East 6.2 mi 11m
WA 512 5.5 mi 6m
WA 520 4.4 mi 5m
224th Street East 0.9 mi 1m
208th Street East 0.8 mi 2m
38th Avenue East 0.8 mi 1m
Longest stretch: Valley Freeway — 19.7 mi, about 24m

Turn-by-Turn Driving Directions

Step-by-step road directions between Elk Plain, WA and Redmond, WA.

1

Start on 224th Street East

0.9 mi · 1 min · 224th Street East
2

Turn left onto 38th Avenue East

0.8 mi · 1 min · 38th Avenue East
3

Continue on Wright Road East

0.3 mi · 47 sec · Wright Road East
4

At end of road, turn right onto 208th Street East

0.8 mi · 2 min · 208th Street East
5

Turn left onto Canyon Road East

6.2 mi · 11 min · Canyon Road East
Use the none lane.
6

Take the ramp

0.4 mi · 45 sec
Toward WA 512 East: Puyallup
7

Merge onto WA 512

5.5 mi · 6 min · WA 512
Use the none / straight / right lanes.
8

Keep slight right at fork

0.6 mi · 1 min
Toward WA 167 North, WA 410 East: Seattle, Yakima Use the straight / right lanes.
9

Merge onto WA 167

20 mi · 24 min · Valley Freeway
Use the none / straight / slight right lanes.
10

Take the exit

0.8 mi · 1 min
Toward I 405 North: Bellevue Use the slight right lane.
11

Merge onto I 405

11 mi · 14 min · I 405
Use the none lane.
12

Take the exit

0.5 mi · 59 sec
Exit 14 Toward WA 520: Seattle, Redmond Use the straight / slight right lanes.
13

Keep slight right at fork

453 ft · 11 sec
Toward WA 520 East: 124th Avenue Northeast, Redmond Use the slight right lane.
14

Keep slight left at fork

0.3 mi · 34 sec
Toward 124th Avenue Northeast Use the slight left lane.
15

Merge onto WA 520

4.4 mi · 5 min · WA 520
Use the none / straight / slight right lanes.
16

Take the exit

0.3 mi · 47 sec
Toward West Lake Sammamish Parkway Northeast Use the straight / right lanes.
17

Turn left onto West Lake Sammamish Parkway Northeast

0.3 mi · 40 sec · West Lake Sammamish Parkway Northeast
Use the left / right lanes.
18

Turn right onto Leary Way

0.5 mi · 1 min · Leary Way
Use the straight lane.
19

Turn right onto Redmond Way

315 ft · 18 sec · Redmond Way
Use the none lane.
20

Turn left onto WA 202

30 ft · 0 sec · 164th Avenue Northeast
Use the left lane.
21

Arrive at destination

WA 202

Trip Plan

To make the most of this 1 hour and 17-minute trip, aim to depart during off-peak hours to avoid potential congestion on the major freeways. Since this is a short route, you have the flexibility to drive it in one go without the need for pre-planned rest stops. Keep an eye on your fuel gauge before you head out, though the $11 estimated cost makes it easy to manage your budget. Because you are utilizing major roads like I-405, remain alert for shifting traffic patterns as you transition between highways. Embracing the direct nature of this route allows you to reach Redmond quickly, giving you more time to enjoy your destination once you arrive.

Morning Departure

Leave by 9 AM and you'll arrive before lunch.

Evening Departure

Even a 4 PM departure gets you there before dark in summer.

You can normally do this drive in one day.
You may only need one short stretch break if traffic stays light.
The halfway point lands around 26.8 miles from Elk Plain, WA, or about 41m into the drive.
The longest continuous stretch on this route runs about 19.7 miles.

This is a comfortable same-day trip.

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 53.6 miles or 1h 17m in

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 26.8 miles or 41m in

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Final hour starts around 1h 4m

Traffic, exits, and arrival timing usually matter more near Redmond, WA than in the middle of the route.

Before You Leave

+

Open the route before leaving Elk Plain, WA so your first major turns are already loaded.

+

Leave with enough water and a charging cable within reach, not packed away.

+

Check your fuel range against the first long segment, especially if you are starting outside city service areas.

Day 1

Settle into the route from Elk Plain, WA

This is one driving day of about 53.6 miles and 1h 17m.

Your first comfortable stop window is around 80 miles from Elk Plain, WA.
This route can stay practical as a one-day drive if traffic stays reasonable.
You may only need one short stretch stop if conditions stay smooth.
The longest stretch is on Valley Freeway for about 19.7 miles.

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 26.8 mi from Elk Plain, WA · 41m into the drive

Mid-route town

Meal stop

Kent, WA

27 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Pacing Suggestions

Bellevue, WA

Fuel and coffee

A short stop after about 53.6 miles helps settle the day before fatigue starts building.

Kent, WA

Meal break

The midpoint is around 26.8 miles from Elk Plain, WA, which is a good place for a longer meal and fuel stop.

Arriving in Redmond, WA

The final approach into Redmond, WA usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Redmond, WA.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Regular Gas

$11.25 one way

$22.50 round trip

$5.33/gal 25.4 MPG avg 19 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $5.57 $11.75 $23.50
premium $5.77 $12.18 $24.36
diesel $5.64 $11.91 $23.82

No toll roads detected on this route.

Estimated Trip Cost (one way, 1 person)

Fuel

$11

Meals

$25–$50

Total

$36–$61

Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.

Estimated CO2 emission: 18.8 kg one way. Prices: EIA weekly data, 2026-04-06.

Driving Electric?

About $6 in charging · 0 stops · 68% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 16.1 0 $5.63 $2.57
Efficient EV 13.4 0 $4.69 $2.14
EV Truck/SUV 21.4 0 $7.50 $3.43

Gas CO2

19 kg

EV CO2

6 kg (68% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast data refreshed 3 days ago

Origin

Elk Plain, WA

Night in Elk Plain on Sunday

Local time

9:03 PM

PDT

Current temp

37°F

Unavailable

Live forecast

Destination

Redmond, WA

Night in Redmond on Sunday

Local time

9:03 PM

PDT

Current temp

52°F

Unavailable

Live forecast

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.

Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.

Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

15 degrees warmer at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

1h 17m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Elk Plain, WA to Redmond, WA covers 53.6 miles and takes about 1h 17m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are Valley Freeway, I 405, Canyon Road East. Most of the drive stays on highways, so watch for ramps and exits.
This is a comfortable same-day trip.
The midpoint is about 26.8 miles from Elk Plain, WA. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $11.25 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
This is a demanding drive. With 18 significant decision points across 53.6 miles, you will need to stay alert — especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.
The main spots that need attention: at 14.8 miles: Highway fork - watch signs carefully. Lane positioning matters here. Multiple destination signs - pick the right one; at 47.2 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one; at 47.6 miles: Highway fork - watch signs carefully. Lane positioning matters here. Multiple destination signs - pick the right one.
Between Elk Plain, WA and Redmond, WA, road signs point toward Yakima and 124Th Avenue Northeast.

Was this route helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Return Trip

Redmond, WA to Elk Plain, WA

Plan the drive back the other way.

54.2 mi 1h 18m

Explore more options from Elk Plain, WA or browse trips ending in Redmond, WA.

Looking for more statewide routes? Browse WA road trips.

Explore maps for Elk Plain, WA or Redmond, WA on MapSof.net.