Skip to main content

Trip from Everett, WA to Bellevue, WA

Data updated 0 seconds ago

Drive Time

38m

Distance

28.5 mi

46 km

Drive Score

6/10

Good drive

Same Day?

Yes, doable

Fuel Cost

$6

one way

EV Charging

Loading...

station data

Best Time to Leave

Save up to 10 min
4 AM
0h 35m ★
6 AM
0h 38m
8 AM
0h 45m
10 AM
0h 41m
12 PM
0h 40m
3 PM
0h 41m
5 PM
0h 45m
8 PM
0h 36m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

Trip Overview

This straightforward 28.5-mile drive from Everett, WA to Bellevue, WA is easily manageable as a single-day trip, taking approximately 38 minutes. You'll spend most of your time on major highways, with 88% of the journey on high-speed roads, making it a convenient commute or short hop. The estimated fuel cost for this trip is around $6, offering an affordable option for travel within Washington's Pacific Coast region. Given its brevity and highway focus, this route is ideal for those looking for a quick and efficient transfer between these two cities without the need for an overnight stay.

Trip Pace

Same-day drive is realistic

A same-day return is realistic if you keep stops short.

Break Rhythm

0 planned breaks

A short stop every 2 to 3 hours is enough for this drive.

Midpoint

14.3 miles from Everett, WA

A natural place for your longest stop of the day , about 19m into the drive .

Loading map...

Drive Character

Expect a largely highway-focused drive, with 88% of the 28.5 miles on major thoroughfares like I-405 and I-5. The longest uninterrupted stretch is 16 miles on I-405, providing a consistent flow of traffic. While primarily an interstate experience, you will encounter some surface street driving, particularly on Broadway as you approach your destination. This route offers little in the way of winding backroads or dramatic scenic shifts, presenting a practical and direct path between Everett and Bellevue.

Most of the miles stay on highways, which makes pacing and fuel planning easier than turn-by-turn city driving.
There are about 14 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
I 405 is the longest continuous segment at about 16 miles.

How Hard Is This Drive?

This is a straightforward highway drive that stays mostly on I 405 and I 5. This route has several spots where lane changes, forks, or exits need your full attention. The trickiest moment comes around 10.6 miles in.

Route Complexity 9/10

High effort - long or complex enough to need steady focus all day

This is a demanding drive. With 11 significant decision points across 28.5 miles, you will need to stay alert — especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.

Where does it get tricky?

The main spots that need attention: at 10.6 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one; at 12.4 miles (I 405): Highway fork - watch signs carefully. Lane positioning matters here; at 27.5 miles: Exit ramp - move to the correct lane early. Lane positioning matters here.

Critical Maneuvers

5 of 11 key points

These are the spots where you need to pay the most attention. Preview them before you drive.

8
10.6 mi into trip | ~14m in

Take the exit toward I 405 South: Bellevue, Renton

Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one

Use the straight / slight right lanes. Exit 182 Toward I 405 South: Bellevue, Renton
6
12.4 mi into trip | ~16m in | I 405

Keep slight right at fork onto I 405

Highway fork - watch signs carefully. Lane positioning matters here

Use the straight / slight right lanes.
7
27.5 mi into trip | ~35m in

Take the exit toward Northeast 4th Street

Exit ramp - move to the correct lane early. Lane positioning matters here

Use the straight / slight right lanes. Exit 13A Toward Northeast 4th Street
6
27.7 mi into trip | ~36m in | Northeast 4th Street

Turn right onto Northeast 4th Street

Lane positioning matters here

Use the right lane.
7
28.3 mi into trip | ~37m in | Main Street

Turn right onto Main Street

Lane positioning matters here

Use the right lane.

Towns Mentioned on Route Signs

Based on OSRM destination-sign hints, not a full list of every settlement the road passes.

On the drive from Everett, WA to Bellevue, WA, road signs begin pointing toward Renton along the way.

Renton

10.6 mi in | ~14m

Main Roads

Road Distance Duration
I 405 16 mi 20m
I 5 9 mi 11m
Broadway 1.1 mi 1m
Northeast 4th Street 0.3 mi 1m
108th Avenue Northeast 0.3 mi <1m
Main Street 0.2 mi <1m
Hewitt Avenue <0.1 mi <1m
Longest stretch: I 405 — 16 mi, about 20m

Turn-by-Turn Driving Directions

Step-by-step road directions between Everett, WA and Bellevue, WA.

1

Start on Hewitt Avenue

128 ft · 6 sec · Hewitt Avenue
2

Turn right onto Broadway

1.1 mi · 1 min · Broadway
3

Take the ramp

156 ft · 3 sec
4

Keep slight right at fork

0.4 mi · 57 sec
Toward I 5 South
5

Merge onto I 5

9.0 mi · 11 min · I 5
Use the straight / slight right lanes.
6

Take the exit

0.9 mi · 1 min
Exit 182 Toward I 405 South: Bellevue, Renton Use the straight / slight right lanes.
7

Merge onto I 405

0.9 mi · 1 min · I 405
8

Keep slight right at fork onto I 405

15 mi · 18 min · I 405
Use the straight / slight right lanes.
9

Take the exit

0.2 mi · 31 sec
Exit 13A Toward Northeast 4th Street Use the straight / slight right lanes.
10

Turn right onto Northeast 4th Street

0.3 mi · 1 min · Northeast 4th Street
Use the right lane.
11

Turn left onto 108th Avenue Northeast

0.3 mi · 33 sec · 108th Avenue Northeast
Use the left lane.
12

Turn right onto Main Street

0.2 mi · 35 sec · Main Street
Use the right lane.
13

Turn right

45 ft · 3 sec
14

Arrive at destination

Trip Plan

For this short 38-minute drive, flexibility is key. Leaving Everett outside of peak commute hours will ensure the quickest travel time. With only 28.5 miles and a low fuel cost of $6, you likely won't need extensive planning for stops, but it's always wise to ensure your vehicle is fueled before departing. Pay attention to traffic conditions, as congestion can impact the 38-minute estimate, especially on I-405. A specific tip for this route is to monitor real-time traffic apps before heading out, as minor incidents can cause significant delays on these busy highways.

Morning Departure

Leave by 9 AM and you'll arrive before lunch.

Evening Departure

Even a 4 PM departure gets you there before dark in summer.

You can normally do this drive in one day.
You may only need one short stretch break if traffic stays light.
The halfway point lands around 14.3 miles from Everett, WA, or about 19m into the drive.
The longest continuous stretch on this route runs about 16 miles.

This is a comfortable same-day trip.

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 28.5 miles or 38m in

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 14.3 miles or 19m in

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Final hour starts around 31m

Traffic, exits, and arrival timing usually matter more near Bellevue, WA than in the middle of the route.

Before You Leave

+

Open the route before leaving Everett, WA so your first major turns are already loaded.

+

Leave with enough water and a charging cable within reach, not packed away.

+

Check your fuel range against the first long segment, especially if you are starting outside city service areas.

Day 1

Settle into the route from Everett, WA

This is one driving day of about 28.5 miles and 38m.

Your first comfortable stop window is around 80 miles from Everett, WA.
This route can stay practical as a one-day drive if traffic stays reasonable.
You may only need one short stretch stop if conditions stay smooth.
The longest stretch is on I 405 for about 16 miles.

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 14.3 mi from Everett, WA · 19m into the drive

city in King County, Washington, United States

Mid-route town

Meal stop

Kenmore, WA

14 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Pacing Suggestions

Redmond, WA

Fuel and coffee

A short stop after about 28.5 miles helps settle the day before fatigue starts building.

Kenmore, WA

Meal break

The midpoint is around 14.3 miles from Everett, WA, which is a good place for a longer meal and fuel stop.

Arriving in Bellevue, WA

The final approach into Bellevue, WA usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Bellevue, WA.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Regular Gas

$5.96 one way

$11.93 round trip

$5.32/gal 25.4 MPG avg 10 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $5.58 $6.26 $12.51
premium $5.77 $6.47 $12.94
diesel $5.61 $6.29 $12.58

No toll roads detected on this route.

Estimated Trip Cost (one way, 1 person)

Fuel

$6

Meals

$25–$50

Total

$31–$56

Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.

Estimated CO2 emission: 10 kg one way. Prices: EIA weekly data, 2026-04-13.

Driving Electric?

About $3 in charging · 0 stops · 70% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 8.5 0 $2.99 $1.37
Efficient EV 7.1 0 $2.49 $1.14
EV Truck/SUV 11.4 0 $3.99 $1.82

Gas CO2

10 kg

EV CO2

3 kg (70% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast data refreshed 5 hours ago

Origin

Everett, WA

Late night in Everett on Wednesday

Local time

4:02 AM

PDT

Current temp

57°F

Unavailable

Live forecast

Destination

Bellevue, WA

Late night in Bellevue on Wednesday

Local time

4:02 AM

PDT

Current temp

45°F

Unavailable

Live forecast

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.

Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.

Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

12 degrees cooler at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

38m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Everett, WA to Bellevue, WA covers 28.5 miles and takes about 38m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are I 405, I 5, Broadway. Most of the drive stays on highways, so watch for ramps and exits.
This is a comfortable same-day trip.
The midpoint is about 14.3 miles from Everett, WA. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $5.96 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
This is a demanding drive. With 11 significant decision points across 28.5 miles, you will need to stay alert — especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.
The main spots that need attention: at 10.6 miles: Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one; at 12.4 miles (I 405): Highway fork - watch signs carefully. Lane positioning matters here; at 27.5 miles: Exit ramp - move to the correct lane early. Lane positioning matters here.
On the drive from Everett, WA to Bellevue, WA, road signs begin pointing toward Renton along the way.

Was this route helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Explore more options from Everett, WA or browse trips ending in Bellevue, WA.

Looking for more statewide routes? Browse WA road trips.

Explore maps for Everett, WA or Bellevue, WA on MapSof.net.