Origin
Franklin Furnace, OH
Late night in Franklin Furnace on Saturday
Local time
12:39 AM
EDT
Current temp
55°F
Unavailable
Compiled and reviewed by the Trip.ovh planning team at COD Solutions Oy · Last reviewed Apr 18, 2026 · Editorial standards
Drive Time
2h 13m
Distance
135.1 mi
217 km
Drive Score
8/10
Great drive
Same Day?
Yes, doable
Fuel Cost
$21
one way
EV Charging
Unknown
Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.
Franklin Furnace, OH
Tima Miroshnichenko
Dayton, OH
Wikimedia Commons
The drive from Franklin Furnace, OH to Dayton, OH covers 135.1 miles and takes about 2h 13m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.
The route leans on Gallia Pike, US 52 West, SR 823 North for much of the mileage, and the overall profile is turn-heavy local drive. At current regular gas prices, budget about $20.97 one way before food or hotel costs.
Trip Pace
Same-day drive is realistic
A same-day return is realistic if you keep stops short.
Midpoint
67.5 miles from Franklin Furnace, OH
A natural place for your longest stop of the day , about 1h 6m into the drive .
Weekend Trip
Doable as a same-day drive at 2h 13m. Total distance: 135.1 miles.
Family Friendly
Moderate complexity with 0 natural rest stops along the way.
Solo Traveler
2h 13m drive, comfortable solo distance.
First-Time Driver
Mostly highway driving (0%). Straightforward navigation.
Scenic Drive
Turn-heavy local drive route profile.
Expect a 2h 13m drive with frequent turns across 135.1 miles of local and secondary roads.
Expect a hands-on drive with frequent turns and local roads rather than long highway stretches. Navigation is very simple - set it and forget it for most of the drive.
Very easy - short and simple to drive
Balances navigation complexity with total wheel time.
The drive from Franklin Furnace, OH to Dayton, OH is easy. At 2h 13m with 0% highway, most drivers will find it relaxed and low-stress.
Where does it get tricky?
This route does not have any notably tricky sections. Most of the drive from Franklin Furnace, OH to Dayton, OH is straightforward, with well-signed roads and simple exits.
| Road | Distance | Duration |
|---|---|---|
| Gallia Pike | — | — |
| US 52 West | — | — |
| SR 823 North | — | — |
| US 23 North | — | — |
| US 35 West | — | — |
| SR 48 | — | — |
| Jefferson Street | — | — |
| South Jefferson Street | — | — |
Some road-level metrics are being recalculated.
Step-by-step road directions between Franklin Furnace, OH and Dayton, OH.
Start on Big Pete Road
Turn sharp right onto Gallia Pike
Continue on Gallia Pike
Take the ramp right toward US 52 West: Portsmouth
Merge slight left
Take the exit slight right toward SR 823 North: Chillicothe
Keep slight right to continue on US 23 North: Chillicothe
Merge slight left
Keep slight left to continue on US 35 West: Dayton
Take the exit slight right toward SR 48: Main Street, Jefferson Street
Keep slight right to continue on Jefferson Street, Day Air Ballpark, Patterson boulevard
Turn slight right onto South Jefferson Street
Turn left onto East 4th Street
Turn right onto South Main Street
Arrive at your destination
Morning Departure
Leave by 9 AM and you'll arrive before lunch.
Evening Departure
Even a 4 PM departure gets you there before dark in summer.
This is a comfortable same-day trip.
Departure
Before you leave
Start with fuel, water, and navigation already sorted so the first hour feels easy.
First stop
Around 30 miles or 29m in
Use this first pause for coffee, a restroom break, and a quick traffic check ahead.
Halfway reset
Around 67.5 miles or 1h 6m in
This is the best place for your longest stop, a real meal, and a full fuel check.
Final approach
Final hour starts around 1h 49m
Traffic, exits, and arrival timing usually matter more near Dayton, OH than in the middle of the route.
Open the route before leaving Franklin Furnace, OH so your first major turns are already loaded.
Leave with enough water and a charging cable within reach, not packed away.
Check your fuel range against the first long segment, especially if you are starting outside city service areas.
Day 1
Settle into the route from Franklin Furnace, OH
This is one driving day of about 135.1 miles and 2h 13m.
Rest stops, refuel points, and overnight suggestions along this route.
Halfway Point
Midpoint
About 67.5 mi from Franklin Furnace, OH · 1h 6m into the drive
Mid-route town
Meal stop
68 mi into the route
Best for: Lunch, fuel, and a longer reset
This sits close to the middle of the route, so it works well for the longest stop of the day.
A short stop after about 30 miles helps settle the day before fatigue starts building.
The midpoint is around 67.5 miles from Franklin Furnace, OH, which is a good place for a longer meal and fuel stop.
The final approach into Dayton, OH usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.
Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Dayton, OH.
These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.
Regular Gas
$20.97 one way
$41.93 round trip
| Fuel Type | $/gal | One Way | Round Trip |
|---|---|---|---|
| midgrade | $4.38 | $23.27 | $46.54 |
| premium | $4.91 | $26.11 | $52.22 |
| diesel | $5.61 | $29.83 | $59.66 |
No toll roads detected on this route.
Estimated Trip Cost (one way, 1 person)
Fuel
$21
Meals
$25–$50
Total
$46–$71
Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.
Estimated CO2 emission: 47.3 kg one way. Prices: EIA weekly data, 2026-04-13.
Driving Electric?
About $14 in charging · 0 stops · 66% less CO2
| Vehicle Type | kWh | Stops | DC Fast | Home Charge |
|---|---|---|---|---|
| Average EV | 40.5 | 0 | $14.19 | $6.48 |
| Efficient EV | 33.8 | 0 | $11.82 | $5.40 |
| EV Truck/SUV | 54 | 0 | $18.91 | $8.65 |
Gas CO2
47 kg
EV CO2
16 kg (66% less)
This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.
DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.
Current conditions at both ends of the drive.
Origin
Late night in Franklin Furnace on Saturday
Local time
12:39 AM
EDT
Current temp
55°F
Unavailable
Destination
Late night in Dayton on Saturday
Local time
12:39 AM
EDT
Current temp
59°F
Unavailable
55°F
Waverly, OH
68 mi in
Seasonal Notes
Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.
Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.
Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.
Time zone
Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.
Temperature spread
A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.
Road read
Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.
Weather data from the National Weather Service. Conditions may change; check closer to your travel date.
Compiled by the Trip.ovh planning team at COD Solutions Oy from open government datasets — OSRM over OpenStreetMap for geometry, and EIA for fuel prices. See our methodology for refresh cadence and limitations.
Was this helpful?
Thanks for your feedback!
Your tip has been submitted. Thanks!
/500
Recent Tips
·
Explore more options from Franklin Furnace, OH or browse trips ending in Dayton, OH.
Looking for more statewide routes? Browse OH road trips.