Origin
Franklin, TN
Night in Franklin on Thursday
Local time
10:23 PM
CDT
Current temp
76°F
Unavailable
Live forecast
Trip from Franklin, TN to Park City, TN
Last recalculated Apr 17, 2026
Drive Time
1h 28m
Distance
78.2 mi
126 km
Drive Score
7/10
Good drive
Same Day?
Yes, doable
Fuel Cost
$12
one way
EV Charging
Unknown
Best Time to Leave
4 AM
1h 21m
★
6 AM
1h 28m
8 AM
1h 42m
10 AM
1h 33m
12 PM
1h 31m
3 PM
1h 33m
5 PM
1h 41m
8 PM
1h 24m
Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.
Franklin, TN
Wikimedia Commons
Park City, TN
Kelly
Trip Overview
The drive from Franklin, TN to Park City, TN covers 78.2 miles and takes about 1h 28m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.
The route leans on I 65, US 64, Huntsville Highway for much of the mileage, and the overall profile is highway-focused drive. The longest uninterrupted segment is about 50.9 miles on I 65. At current regular gas prices, budget about $12.23 one way before food or hotel costs.
Who Is This Route For?
Weekend Trip
Doable as a same-day drive at 1h 28m. Total distance: 78.2 miles.
Family Friendly
Moderate complexity with 0 natural rest stops along the way.
Solo Traveler
1h 28m drive, comfortable solo distance.
EV Driver
0 DC fast chargers along the route. Coverage: unknown.
First-Time Driver
Mostly highway driving (90%). Straightforward navigation.
Drive Character
This is a 1h 28m highway drive covering 78.2 miles, with most of the trip on I 65 and US 64. The longest continuous stretch is about 50.9 miles on I 65.
Most of the miles stay on highways, which makes pacing and fuel planning easier than turn-by-turn city driving.
There are about 10 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
I 65 is the longest continuous segment at about 50.9 miles.
How Hard Is This Drive?
This is a straightforward highway drive that stays mostly on I 65 and US 64. Navigation is very simple - set it and forget it for most of the drive. The trickiest moment comes around 0.1 miles in near 3rd Avenue South.
Driving Effort
2/10
Very easy - short and simple to drive
Balances navigation complexity with total wheel time.
The drive from Franklin, TN to Park City, TN is easy. At 1h 28m with 90% highway, most drivers will find it relaxed and low-stress.
Where does it get tricky?
The main spots that need attention: at 0.1 miles (3rd Avenue South): Lane positioning matters here; at 2.8 miles: Exit ramp - move to the correct lane early. Lane positioning matters here; at 3 miles (I 65): Merge point - match speed before joining. Lane positioning matters here.
Critical Maneuvers
5 of 7 key pointsThese are the spots where you need to pay the most attention. Preview them before you drive.
3
0.1 mi into trip
|
~0m in
|
3rd Avenue South
Straight onto 3rd Avenue South
Lane positioning matters here
Use the straight / right lanes.
7
2.8 mi into trip
|
~4m in
Take the exit toward I 65 South: Birmingham
Exit ramp - move to the correct lane early. Lane positioning matters here
Use the right lane.
Toward I 65 South: Birmingham
5
3 mi into trip
|
~4m in
|
I 65
Merge onto I 65
Merge point - match speed before joining. Lane positioning matters here
Use the straight / slight right lanes.
6
53.9 mi into trip
|
~59m in
Take the exit toward 64: Pulaski, Fayetteville
Exit ramp - move to the correct lane early. Multiple destination signs - pick the right one
Exit 14
Toward 64: Pulaski, Fayetteville
4
54.2 mi into trip
|
~1h in
|
US 64
Turn left onto US 64
Navigation decision point
Towns Mentioned on Route Signs
Based on OSRM destination-sign hints, not a full list of every settlement the road passes.
Between Franklin, TN and Park City, TN, road signs point toward 64: Pulaski and Fayetteville.
64: Pulaski
53.9 mi in
|
~59m
Fayetteville
53.9 mi in
|
~59m
Main Roads
| Road | Distance | Duration |
|---|---|---|
| I 65 | 50.9 mi | 54m |
| US 64 | 17.5 mi | 19m |
| Huntsville Highway | 4.3 mi | 5m |
| Murfreesboro Road | 2.3 mi | 3m |
| Wilson Parkway | 2.2 mi | 2m |
| 3rd Avenue South | 0.3 mi | <1m |
| Public Square | <0.1 mi | <1m |
Longest stretch:
I 65
— 50.9 mi, about 54m
Turn-by-Turn Driving Directions
Step-by-step road directions between Franklin, TN and Park City, TN.
1
Start on US 31 Business; TN 96
418 ft
·
7 sec
·
Public Square
2
Continue on 3rd Avenue South
0.3 mi
·
34 sec
·
3rd Avenue South
Use the straight / right lanes.
3
Continue on SR 96
2.3 mi
·
3 min
·
Murfreesboro Road
Use the straight / right lanes.
4
Take the exit
0.3 mi
·
34 sec
Toward I 65 South: Birmingham
Use the right lane.
5
Merge onto I 65
51 mi
·
54 min
·
I 65
Use the straight / slight right lanes.
6
Take the exit
0.3 mi
·
36 sec
Exit 14
Toward 64: Pulaski, Fayetteville
7
Turn left onto US 64
18 mi
·
19 min
·
US 64
8
Turn right onto US 64
2.2 mi
·
2 min
·
Wilson Parkway
9
Turn right onto US 231; US 431
4.3 mi
·
5 min
·
Huntsville Highway
10
Arrive at destination
US 231; US 431
Where to Stop
Rest stops, refuel points, and overnight suggestions along this route.
Halfway Point
Midpoint
About 39.1 mi from Franklin, TN · 43m into the drive
Mid-route town
Meal stop
39 mi into the route
Best for: Lunch, fuel, and a longer reset
This sits close to the middle of the route, so it works well for the longest stop of the day.
Pacing Suggestions
Fuel and coffee
A short stop after about 17 miles helps settle the day before fatigue starts building.
Meal break
The midpoint is around 39.1 miles from Franklin, TN, which is a good place for a longer meal and fuel stop.
Arriving in Park City, TN
The final approach into Park City, TN usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.
These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.
Fuel & Cost
Regular Gas
$12.23 one way
$24.45 round trip
$3.97/gal
25.4 MPG avg
27 kg CO2
| Fuel Type | $/gal | One Way | Round Trip |
|---|---|---|---|
| midgrade | $4.36 | $13.42 | $26.85 |
| premium | $4.89 | $15.05 | $30.10 |
| diesel | $5.61 | $17.27 | $34.53 |
No toll roads detected on this route.
Drive Cost (one way)
Fuel
$12
Estimated CO2 emission: 27.4 kg one way. Prices: EIA weekly data, 2026-04-13.
Driving Electric?
About $8 in charging · 0 stops · 67% less CO2
| Vehicle Type | kWh | Stops | DC Fast | Home Charge |
|---|---|---|---|---|
| Average EV | 23.5 | 0 | $8.21 | $3.75 |
| Efficient EV | 19.6 | 0 | $6.84 | $3.13 |
| EV Truck/SUV | 31.3 | 0 | $10.95 | $5.00 |
Gas CO2
27 kg
EV CO2
9 kg (67% less)
This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.
DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.
Travel Intel
Current conditions at both ends of the drive.
Destination
Park City, TN
Night in Park City on Thursday
Local time
10:23 PM
CDT
Current temp
55°F
Unavailable
Live forecast
75°F
Pulaski, TN
39 mi in
Time zone
Same local time
Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.
Temperature spread
21 degrees cooler at arrival
A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.
Road read
1h 28m on the road
Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.
Weather data from the National Weather Service. Conditions may change; check closer to your travel date.
Frequently Asked Questions
The drive from Franklin, TN to Park City, TN covers 78.2 miles and takes about 1h 28m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are I 65, US 64, Huntsville Highway. Most of the drive stays on highways, so watch for ramps and exits.
This is a comfortable same-day trip.
The midpoint is about 39.1 miles from Franklin, TN. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $12.23 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
The drive from Franklin, TN to Park City, TN is easy. At 1h 28m with 90% highway, most drivers will find it relaxed and low-stress.
The main spots that need attention: at 0.1 miles (3rd Avenue South): Lane positioning matters here; at 2.8 miles: Exit ramp - move to the correct lane early. Lane positioning matters here; at 3 miles (I 65): Merge point - match speed before joining. Lane positioning matters here.
Between Franklin, TN and Park City, TN, road signs point toward 64: Pulaski and Fayetteville.
Was this helpful?
Thanks for your feedback!
Your tip has been submitted. Thanks!
/500
Recent Tips
·
Explore More
More trips to Park City, TN
Explore more options from Franklin, TN or browse trips ending in Park City, TN.
Looking for more statewide routes? Browse TN road trips.
Explore maps for Franklin, TN or Park City, TN on MapSof.net.