Skip to main content

Trip from Gary, IN to Milford, IN

Compiled and reviewed by the Trip.ovh planning team at COD Solutions Oy · Last reviewed Apr 17, 2026 · Editorial standards

Drive Time

2h 9m

Distance

89.7 mi

144 km

Drive Score

7/10

Good drive

Same Day?

Yes, doable

Fuel Cost

$14

one way

EV Charging

Unknown

Best Time to Leave

Save up to 27 min
4 AM
2h 1m ★
6 AM
2h 10m
8 AM
2h 28m
10 AM
2h 16m
12 PM
2h 15m
3 PM
2h 17m
5 PM
2h 27m
8 PM
2h 4m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

city in Lake County, State of Indiana, United States

Gary, IN

Wikimedia Commons

Downtown Milford, IN, IN

Milford, IN

A K

Trip Overview

The drive from Gary, IN to Milford, IN covers 89.7 miles and takes about 2h 9m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.

The route leans on Harrison Boulevard, Harrison Street, West 5th Avenue for much of the mileage, and the overall profile is turn-heavy local drive. At current regular gas prices, budget about $14.02 one way before food or hotel costs.

Trip Pace

Same-day drive is realistic

A same-day return is realistic if you keep stops short.

Midpoint

44.9 miles from Gary, IN

A natural place for your longest stop of the day , about 1h 5m into the drive .

Who Is This Route For?

Weekend Trip

Doable as a same-day drive at 2h 9m. Total distance: 89.7 miles.

Family Friendly

Moderate complexity with 0 natural rest stops along the way.

Solo Traveler

2h 9m drive, comfortable solo distance.

First-Time Driver

Mostly highway driving (0%). Straightforward navigation.

Scenic Drive

Turn-heavy local drive route profile.

Drive Character

Expect a 2h 9m drive with frequent turns across 89.7 miles of local and secondary roads.

This route has more turning and local-road decision points than a simple highway run.
There are about 19 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
Harrison Boulevard is one of the defining roads on this drive.

How Hard Is This Drive?

Expect a hands-on drive with frequent turns and local roads rather than long highway stretches. Navigation is very simple - set it and forget it for most of the drive.

Driving Effort 1/10

Very easy - short and simple to drive

Balances navigation complexity with total wheel time.

The drive from Gary, IN to Milford, IN is easy. At 2h 9m with 0% highway, most drivers will find it relaxed and low-stress.

Where does it get tricky?

This route does not have any notably tricky sections. Most of the drive from Gary, IN to Milford, IN is straightforward, with well-signed roads and simple exits.

Main Roads

Road Distance Duration
Harrison Boulevard
Harrison Street
West 5th Avenue
Broadway
I 90 East
Indiana Toll Road
SR 49
North Calumet Avenue

Some road-level metrics are being recalculated.

Longest stretch: Harrison Boulevard — detailed segment metrics are refreshing.

Turn-by-Turn Driving Directions

Step-by-step road directions between Gary, IN and Milford, IN.

1

Start on 10th Place

253 ft · 16 sec · 10th Place
2

Turn right onto Harrison Boulevard

0.1 mi · 18 sec · Harrison Boulevard
3

Continue on Harrison Street

0.5 mi · 1 min · Harrison Street
4

Turn right onto West 5th Avenue

0.5 mi · 1 min · West 5th Avenue
5

Turn left onto Broadway

0.2 mi · 36 sec · Broadway
6

Take the ramp right toward I 90 East

0.4 mi · 52 sec · I 90 East
7

Merge slight left onto Indiana Toll Road

16 mi · 18 min · Indiana Toll Road
8

Take the exit slight right toward SR 49: Chesterton, Valparaiso

0.7 mi · 1 min · SR 49: Chesterton, Valparaiso
9

Turn right

0.3 mi · 37 sec
10

Turn left onto North Calumet Avenue

1.6 mi · 3 min · North Calumet Avenue
11

Turn left

6.7 mi · 9 min
12

Enter the roundabout and take exit 2 toward the route

141 ft · 3 sec · the route
13

Exit the roundabout

0.8 mi · 1 min
14

Turn right

1.2 mi · 2 min
15

Continue straight

518 ft · 9 sec
16

Turn slight right

58 mi · 1 hr 23 min
17

Turn right

2.8 mi · 4 min
18

Turn left onto West Catherine Street

0.2 mi · 59 sec · West Catherine Street
19

Arrive at your destination

Trip Plan

Morning Departure

Leave by 9 AM and you'll arrive before lunch.

Evening Departure

Even a 4 PM departure gets you there before dark in summer.

You can normally do this drive in one day.
You may only need one short stretch break if traffic stays light.
The halfway point lands around 44.9 miles from Gary, IN, or about 1h 5m into the drive.

This is a comfortable same-day trip.

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 20 miles or 28m in

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 44.9 miles or 1h 5m in

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Final hour starts around 1h 50m

Traffic, exits, and arrival timing usually matter more near Milford, IN than in the middle of the route.

Before You Leave

+

Open the route before leaving Gary, IN so your first major turns are already loaded.

+

Leave with enough water and a charging cable within reach, not packed away.

+

Check your fuel range against the first long segment, especially if you are starting outside city service areas.

Day 1

Settle into the route from Gary, IN

This is one driving day of about 89.7 miles and 2h 9m.

Your first comfortable stop window is around 20 miles from Gary, IN.
This route can stay practical as a one-day drive if traffic stays reasonable.

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 44.9 mi from Gary, IN · 1h 5m into the drive

city in LaPorte County, Indiana, United States of America

Mid-route town

Meal stop

LaPorte, IN

45 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Pacing Suggestions

Chesterton, IN

Fuel and coffee

A short stop after about 20 miles helps settle the day before fatigue starts building.

LaPorte, IN

Meal break

The midpoint is around 44.9 miles from Gary, IN, which is a good place for a longer meal and fuel stop.

Arriving in Milford, IN

The final approach into Milford, IN usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Milford, IN.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Regular Gas

$14.02 one way

$28.05 round trip

$3.97/gal 25.4 MPG avg 31 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.36 $15.40 $30.79
premium $4.89 $17.26 $34.52
diesel $5.61 $19.80 $39.61

No toll roads detected on this route.

Estimated Trip Cost (one way, 1 person)

Fuel

$14

Meals

$25–$50

Total

$39–$64

Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.

Estimated CO2 emission: 31.4 kg one way. Prices: EIA weekly data, 2026-04-13.

Driving Electric?

About $9 in charging · 0 stops · 68% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 26.9 0 $9.42 $4.31
Efficient EV 22.4 0 $7.85 $3.59
EV Truck/SUV 35.9 0 $12.56 $5.74

Gas CO2

31 kg

EV CO2

10 kg (68% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast as of Apr 15, 2026

Origin

Gary, IN

Afternoon in Gary on Friday

Local time

1:46 PM

CDT

Current temp

64°F

Unavailable

Live forecast

Destination

Milford, IN

Afternoon in Milford on Friday

Local time

2:46 PM

EDT

Current temp

69°F

Unavailable

Live forecast

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.

Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.

Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Time zone

1 hour later

The destination clock does not match departure time, so double-check hotel check-in windows and late arrival plans.

Temperature spread

5 degrees warmer at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

2h 9m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Gary, IN to Milford, IN covers 89.7 miles and takes about 2h 9m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.

The main roads are Harrison Boulevard, Harrison Street, West 5th Avenue. Expect a mix of highway and local road driving.

This is a comfortable same-day trip.

The midpoint is about 44.9 miles from Gary, IN. Look for rest areas, gas stations, or food options near the halfway mark.

At current regular gas prices, expect to spend about $14.02 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.

Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.

The drive from Gary, IN to Milford, IN is easy. At 2h 9m with 0% highway, most drivers will find it relaxed and low-stress.

This route does not have any notably tricky sections. Most of the drive from Gary, IN to Milford, IN is straightforward, with well-signed roads and simple exits.

The route from Gary, IN to Milford, IN does not surface many named destination signs beyond the main corridor.

How this page is built

Compiled by the Trip.ovh planning team at COD Solutions Oy from open government datasets — OSRM over OpenStreetMap for geometry, and EIA for fuel prices. See our methodology for refresh cadence and limitations.

Was this helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Return Trip

Milford, IN to Gary, IN

Plan the drive back the other way.

89.8 mi 2h 9m

Explore more options from Gary, IN or browse trips ending in Milford, IN.

Looking for more statewide routes? Browse IN road trips.