Skip to main content

Trip from Griffith, IN to Gary, IN

Compiled and reviewed by the Trip.ovh planning team at COD Solutions Oy · Last reviewed Apr 17, 2026 · Editorial standards

Drive Time

17m

Distance

8.7 mi

14 km

Drive Score

7/10

Good drive

Same Day?

Yes, doable

Fuel Cost

$1

one way

EV Charging

Unknown

Best Time to Leave

4 AM
0h 16m ★
6 AM
0h 18m
8 AM
0h 21m
10 AM
0h 19m
12 PM
0h 19m
3 PM
0h 19m
5 PM
0h 21m
8 PM
0h 17m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

town in Calumet and St. John townships in Lake County, Indiana, United States

Griffith, IN

Wikimedia Commons

city in Lake County, State of Indiana, United States

Gary, IN

Wikimedia Commons

Trip Overview

Griffith, IN to Gary, IN is 8.7 miles and takes about 17m via Borman Expressway, with a fuel budget near $1 and enough daylight to finish in a day. This short hop stays within the Midwest region, specifically in Indiana, making it a straightforward local drive. It’s a quick trip that’s perfect for when you need to get from point A to point B without committing to a long journey. Consider this a very manageable drive that won't eat up much of your day.

Who Is This Route For?

Weekend Trip

Doable as a same-day drive at 17m. Total distance: 8.7 miles.

Family Friendly

Moderate complexity with 0 natural rest stops along the way.

Solo Traveler

17m drive, comfortable solo distance.

EV Driver

0 DC fast chargers along the route. Coverage: unknown.

Scenic Drive

Turn-heavy local drive route profile with national parks nearby.

Drive Character

This is a turn-heavy local drive, with about 21% of the route on highways. You'll navigate through a mix of local streets and expressway sections, including the Borman Expressway and Richard G. Hatcher Boulevard. The longest stretch without a significant turn is about 1.8 miles on the Borman Expressway. Expect a varied driving experience, shifting from quicker highway segments to more frequent turns as you approach your destination.

This route has more turning and local-road decision points than a simple highway run.
There are about 15 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
Borman Expressway is the longest continuous segment at about 1.8 miles.

How Hard Is This Drive?

Expect a hands-on drive with frequent turns and local roads rather than long highway stretches. You will hit about 12 points where you need to pay attention to lane position or signs. The trickiest moment comes early in the drive near North Wood Street.

Driving Effort 6/10

Moderate - straightforward overall, but long enough or busy enough to require pacing

Balances navigation complexity with total wheel time.

This drive requires moderate attention. Across 8.7 miles you will encounter 12 spots where lane choice or exit timing matters. Not difficult for experienced highway drivers, but worth previewing the tricky sections before you go.

Where does it get tricky?

The main spots that need attention: near the start (North Wood Street): Navigation decision point; at 0.2 miles (East Elm Street): Navigation decision point; at 2.5 miles (Burr Street): Lane positioning matters here.

Critical Maneuvers

5 of 12 key points

These are the spots where you need to pay the most attention. Preview them before you drive.

4
0 mi into trip | ~0m in | North Wood Street

Turn left onto North Wood Street

Navigation decision point

4
0.2 mi into trip | ~0m in | East Elm Street

Turn right onto East Elm Street

Navigation decision point

6
2.5 mi into trip | ~6m in | Burr Street

Turn left onto Burr Street

Lane positioning matters here

Use the left lane.
7
6 mi into trip | ~12m in

Take the exit toward Grant Street

Exit ramp - move to the correct lane early. Lane positioning matters here

Use the slight right lane. Exit 9 Toward Grant Street
6
6.3 mi into trip | ~13m in

Keep slight left at fork

Highway fork - watch signs carefully. Lane positioning matters here

Use the slight left lane.

Main Roads

Road Distance Duration
Borman Expressway 1.8 mi 2m
Richard G. Hatcher Boulevard 1.4 mi 2m
North Colfax Street 1.4 mi 3m
Burr Street 1.3 mi 2m
West Ridge Road 0.5 mi 1m
East Elm Street 0.5 mi 1m
West 15th Avenue 0.5 mi <1m
Harrison Boulevard 0.4 mi 1m
Longest stretch: Borman Expressway — 1.8 mi, about 2m

Turn-by-Turn Driving Directions

Step-by-step road directions between Griffith, IN and Gary, IN.

1

Start on East Miller Street

232 ft · 15 sec · East Miller Street
2

Turn left onto North Wood Street

0.1 mi · 31 sec · North Wood Street
3

Turn right onto East Elm Street

0.5 mi · 1 min · East Elm Street
4

Turn left onto North Colfax Street

1.4 mi · 3 min · North Colfax Street
5

Turn right onto US 6 Business

0.5 mi · 1 min · West Ridge Road
6

Turn left onto Burr Street

1.3 mi · 2 min · Burr Street
Use the left lane.
7

Take the ramp

0.3 mi · 45 sec
Toward I 80 East, I 94 East, US 6 East: Detroit
8

Merge onto I 80; I 94; US 6

1.8 mi · 2 min · Borman Expressway
9

Take the exit

0.4 mi · 46 sec
Exit 9 Toward Grant Street Use the slight right lane.
10

Keep slight left at fork

201 ft · 6 sec
Use the slight left lane.
11

Turn left onto Richard G. Hatcher Boulevard

1.4 mi · 2 min · Richard G. Hatcher Boulevard
12

Turn right onto West 15th Avenue

0.5 mi · 56 sec · West 15th Avenue
13

Turn left onto Harrison Boulevard

0.4 mi · 1 min · Harrison Boulevard
14

Turn right onto 10th Place

254 ft · 11 sec · 10th Place
15

Arrive at destination

10th Place

Fuel & Cost

Regular Gas

$1.36 one way

$2.72 round trip

$3.97/gal 25.4 MPG avg 3 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.36 $1.49 $2.99
premium $4.89 $1.67 $3.35
diesel $5.61 $1.92 $3.84

No toll roads detected on this route.

Drive Cost (one way)

Fuel

$1

Estimated CO2 emission: 3 kg one way. Prices: EIA weekly data, 2026-04-13.

Driving Electric?

About $1 in charging · 0 stops · 67% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 2.6 0 $0.91 $0.42
Efficient EV 2.2 0 $0.76 $0.35
EV Truck/SUV 3.5 0 $1.22 $0.56

Gas CO2

3 kg

EV CO2

1 kg (67% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast as of Apr 15, 2026

Origin

Griffith, IN

Evening in Griffith on Friday

Local time

6:10 PM

CDT

Current temp

71°F

Unavailable

Live forecast

Destination

Gary, IN

Evening in Gary on Friday

Local time

6:10 PM

CDT

Current temp

64°F

Unavailable

Live forecast

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

7 degrees cooler at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

17m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Griffith, IN to Gary, IN covers 8.7 miles and takes about 17m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.

The main roads are Borman Expressway, Richard G. Hatcher Boulevard, North Colfax Street. Expect a mix of highway and local road driving.

This is a comfortable same-day trip.

The midpoint is about 4.3 miles from Griffith, IN. Look for rest areas, gas stations, or food options near the halfway mark.

At current regular gas prices, expect to spend about $1.36 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.

Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.

This drive requires moderate attention. Across 8.7 miles you will encounter 12 spots where lane choice or exit timing matters. Not difficult for experienced highway drivers, but worth previewing the tricky sections before you go.

The main spots that need attention: near the start (North Wood Street): Navigation decision point; at 0.2 miles (East Elm Street): Navigation decision point; at 2.5 miles (Burr Street): Lane positioning matters here.

The route from Griffith, IN to Gary, IN does not surface many named destination signs beyond the main corridor.

Yes. Nearby national parks include Indiana Dunes National Park.

How this page is built

Compiled by the Trip.ovh planning team at COD Solutions Oy from open government datasets — OSRM over OpenStreetMap for geometry, EIA for fuel prices, and NPS for national parks. See our methodology for refresh cadence and limitations.

Was this helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Explore more options from Griffith, IN or browse trips ending in Gary, IN.

Looking for more statewide routes? Browse IN road trips.