Skip to main content

Trip from Gulfport, MS to Picayune, MS

Data updated 0 seconds ago

Drive Time

1h 8m

Distance

48.7 mi

78 km

Drive Score

8/10

Great drive

Same Day?

Yes, doable

Fuel Cost

$7

one way

EV Charging

Loading...

station data

Best Time to Leave

Save up to 16 min
4 AM
1h 3m ★
6 AM
1h 8m
8 AM
1h 19m
10 AM
1h 12m
12 PM
1h 11m
3 PM
1h 13m
5 PM
1h 19m
8 PM
1h 5m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

city in Mississippi, USA

Gulfport, MS

Wikimedia Commons

city in Pearl River County, Mississippi, United States

Picayune, MS

Wikimedia Commons

Trip Overview

The drive from Gulfport, MS to Picayune, MS covers 48.7 miles and takes about 1h 8m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.

The route leans on I 10, Texas Flat Road, 25th Avenue for much of the mileage, and the overall profile is highway-focused drive. The longest uninterrupted segment is about 20.3 miles on I 10. At current regular gas prices, budget about $7.35 one way before food or hotel costs.

Trip Pace

Same-day drive is realistic

A same-day return is realistic if you keep stops short.

Break Rhythm

0 planned breaks

A short stop every 2 to 3 hours is enough for this drive.

Midpoint

24.3 miles from Gulfport, MS

A natural place for your longest stop of the day , about 29m into the drive .

Loading map...

Drive Character

This is a 1h 8m highway drive covering 48.7 miles, with most of the trip on I 10 and Texas Flat Road. The longest continuous stretch is about 20.3 miles on I 10.

Most of the miles stay on highways, which makes pacing and fuel planning easier than turn-by-turn city driving.
There are about 11 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
I 10 is the longest continuous segment at about 20.3 miles.

How Hard Is This Drive?

This is a straightforward highway drive that stays mostly on I 10 and Texas Flat Road. There are only a few real navigation decisions along the way. The trickiest moment comes around 4.6 miles in.

Route Complexity 3/10

Easy - simple navigation with a manageable amount of wheel time

This is a straightforward 1h 8m drive. You will face about 7 decision points, but nothing that requires special attention if you follow navigation.

Where does it get tricky?

The main spots that need attention: at 4.6 miles: Exit ramp - move to the correct lane early; at 4.8 miles (I 10): Merge point - match speed before joining; at 25.1 miles: Exit ramp - move to the correct lane early. Multiple destination signs - pick the right one.

Critical Maneuvers

5 of 7 key points

These are the spots where you need to pay the most attention. Preview them before you drive.

4
4.6 mi into trip | ~7m in

Take the exit toward I 10 West: New Orleans

Exit ramp - move to the correct lane early

Toward I 10 West: New Orleans
3
4.8 mi into trip | ~8m in | I 10

Merge onto I 10

Merge point - match speed before joining

5
25.1 mi into trip | ~30m in

Take the exit toward MS 43, MS 603: Bay Saint Louis, Kiln, Picayune

Exit ramp - move to the correct lane early. Multiple destination signs - pick the right one

Toward MS 43, MS 603: Bay Saint Louis, Kiln, Pi...
4
25.5 mi into trip | ~30m in

Keep slight right at fork

Highway fork - watch signs carefully

4
27.4 mi into trip | ~33m in | Texas Flat Road

Turn left onto Texas Flat Road

Navigation decision point

Towns Mentioned on Route Signs

Based on OSRM destination-sign hints, not a full list of every settlement the road passes.

On the drive from Gulfport, MS to Picayune, MS, road signs begin pointing toward Kiln along the way.

Kiln

25.1 mi in | ~30m

Main Roads

Road Distance Duration
I 10 20.3 mi 21m
Texas Flat Road 13.4 mi 23m
25th Avenue 4.6 mi 7m
US 11 4.1 mi 6m
State Highway 607 3.7 mi 4m
MS 43 1.9 mi 2m
East Canal Street 0.1 mi <1m
Longest stretch: I 10 — 20.3 mi, about 21m

Turn-by-Turn Driving Directions

Step-by-step road directions between Gulfport, MS and Picayune, MS.

1

Start on US 49

4.6 mi · 7 min · 25th Avenue
Use the straight lane.
2

Take the exit

0.3 mi · 35 sec
Toward I 10 West: New Orleans
3

Merge onto I 10

20 mi · 21 min · I 10
4

Take the exit

0.3 mi · 44 sec
Toward MS 43, MS 603: Bay Saint Louis, Kiln, Picayune
5

Keep slight right at fork

252 ft · 6 sec
6

Turn straight onto MS 43; MS 603

1.9 mi · 2 min · MS 43; MS 603
7

Turn left onto Texas Flat Road

13 mi · 23 min · Texas Flat Road
8

Turn right onto MS 607

3.7 mi · 4 min · State Highway 607
9

Continue on US 11

4.1 mi · 6 min · US 11
10

Turn right onto East Canal Street

0.1 mi · 17 sec · East Canal Street
11

Arrive at destination

East Canal Street

Trip Plan

Morning Departure

Leave by 9 AM and you'll arrive before lunch.

Evening Departure

Even a 4 PM departure gets you there before dark in summer.

You can normally do this drive in one day.
You may only need one short stretch break if traffic stays light.
The halfway point lands around 24.3 miles from Gulfport, MS, or about 29m into the drive.
The longest continuous stretch on this route runs about 20.3 miles.

This is a comfortable same-day trip.

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 48.7 miles or 1h 8m in

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 24.3 miles or 29m in

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Final hour starts around 58m

Traffic, exits, and arrival timing usually matter more near Picayune, MS than in the middle of the route.

Before You Leave

+

Open the route before leaving Gulfport, MS so your first major turns are already loaded.

+

Leave with enough water and a charging cable within reach, not packed away.

+

Check your fuel range against the first long segment, especially if you are starting outside city service areas.

Day 1

Settle into the route from Gulfport, MS

This is one driving day of about 48.7 miles and 1h 8m.

Your first comfortable stop window is around 80 miles from Gulfport, MS.
This route can stay practical as a one-day drive if traffic stays reasonable.
You may only need one short stretch stop if conditions stay smooth.
The longest stretch is on I 10 for about 20.3 miles.

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 24.3 mi from Gulfport, MS · 29m into the drive

Downtown Biloxi, MS, MS

Mid-route town

Meal stop

Biloxi, MS

24 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Pacing Suggestions

Chalmette, LA

Fuel and coffee

A short stop after about 48.7 miles helps settle the day before fatigue starts building.

Biloxi, MS

Meal break

The midpoint is around 24.3 miles from Gulfport, MS, which is a good place for a longer meal and fuel stop.

Arriving in Picayune, MS

The final approach into Picayune, MS usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Picayune, MS.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Regular Gas

$7.35 one way

$14.71 round trip

$3.84/gal 25.4 MPG avg 17 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.21 $8.07 $16.15
premium $4.56 $8.74 $17.48
diesel $5.61 $10.75 $21.50

No toll roads detected on this route.

Estimated Trip Cost (one way, 1 person)

Fuel

$7

Meals

$25–$50

Total

$32–$57

Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.

Estimated CO2 emission: 17 kg one way. Prices: EIA weekly data, 2026-04-13.

Driving Electric?

About $5 in charging · 0 stops · 65% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 14.6 0 $5.11 $2.34
Efficient EV 12.2 0 $4.26 $1.95
EV Truck/SUV 19.5 0 $6.82 $3.12

Gas CO2

17 kg

EV CO2

6 kg (65% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast data refreshed 5 days ago

Origin

Gulfport, MS

Late night in Gulfport on Wednesday

Local time

5:27 AM

CDT

Current temp

68°F

Unavailable

Live forecast

Destination

Picayune, MS

Late night in Picayune on Wednesday

Local time

5:27 AM

CDT

Current temp

77°F

Unavailable

Live forecast

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.

Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.

Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

9 degrees warmer at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

1h 8m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Gulfport, MS to Picayune, MS covers 48.7 miles and takes about 1h 8m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are I 10, Texas Flat Road, 25th Avenue. Most of the drive stays on highways, so watch for ramps and exits.
This is a comfortable same-day trip.
The midpoint is about 24.3 miles from Gulfport, MS. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $7.35 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
This is a straightforward 1h 8m drive. You will face about 7 decision points, but nothing that requires special attention if you follow navigation.
The main spots that need attention: at 4.6 miles: Exit ramp - move to the correct lane early; at 4.8 miles (I 10): Merge point - match speed before joining; at 25.1 miles: Exit ramp - move to the correct lane early. Multiple destination signs - pick the right one.
On the drive from Gulfport, MS to Picayune, MS, road signs begin pointing toward Kiln along the way.

Was this route helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Explore more options from Gulfport, MS or browse trips ending in Picayune, MS.

Looking for more statewide routes? Browse MS road trips.

Explore maps for Gulfport, MS or Picayune, MS on MapSof.net.