Trip from Hampstead, MD to Taneytown, MD

Drive Time

33m

Distance

20.5 mi

33 km

Drive Score

6/10

Good drive

Same Day?

Yes, doable

Fuel Cost

$3

one way

EV Charging

None

0 DC fast

Best Time to Leave

Save up to 9 min
4 AM
0h 30m ★
6 AM
0h 33m
8 AM
0h 39m
10 AM
0h 35m
12 PM
0h 35m
3 PM
0h 35m
5 PM
0h 38m
8 PM
0h 31m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

Downtown Hampstead, MD, MD

Hampstead, MD

RDNE Stock project

Downtown Taneytown, MD, MD

Taneytown, MD

Jonathan Borba

Trip Overview

The drive from Hampstead, MD to Taneytown, MD covers 20.5 miles and takes about 33m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.

The route leans on Taneytown Pike, Hampstead Mexico Road, Manchester Road for much of the mileage, and the overall profile is turn-heavy local drive. The longest uninterrupted segment is about 9.4 miles on Taneytown Pike. At current regular gas prices, budget about $3.39 one way before food or hotel costs.

Trip Pace

Same-day drive is realistic

A same-day return is realistic if you keep stops short.

Break Rhythm

0 planned breaks

A short stop every 2 to 3 hours is enough for this drive.

Midpoint

10.3 miles from Hampstead, MD

A natural place for your longest stop of the day , about 17m into the drive .

Drive Character

Expect a 33m drive with frequent turns across 20.5 miles of local and secondary roads.

This route has more turning and local-road decision points than a simple highway run.
There are about 16 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
Taneytown Pike is the longest continuous segment at about 9.4 miles.

How Hard Is This Drive?

Expect a hands-on drive with frequent turns and local roads rather than long highway stretches. There are only a few real navigation decisions along the way. The trickiest moment comes early in the drive near MD 30 Business / Main Street.

Route Complexity 4/10

Easy - simple navigation with a manageable amount of wheel time

This is a straightforward 33m drive. You will face about 8 decision points, but nothing that requires special attention if you follow navigation.

Where does it get tricky?

The main spots that need attention: near the start (MD 30 Business / Main Street): Navigation decision point; at 0.6 miles (MD 482 / Hampstead Mexico Road): Lane positioning matters here; at 1.3 miles (MD 482 / Hampstead Mexico Road): Roundabout - know your exit number before entering.

Critical Maneuvers

5 of 8 key points

These are the spots where you need to pay the most attention. Preview them before you drive.

4
0 mi into trip | ~0m in | MD 30 Business / Main Street

Turn left onto MD 30 Business / Main Street

Navigation decision point

6
0.6 mi into trip | ~1m in | MD 482 / Hampstead Mexico Road

Turn left onto MD 482 / Hampstead Mexico Road

Lane positioning matters here

Use the left lane.
5
1.3 mi into trip | ~2m in | MD 482 / Hampstead Mexico Road

Enter roundabout onto MD 482 / Hampstead Mexico Road

Roundabout - know your exit number before entering

4
19.2 mi into trip | ~29m in | MD 140 / Taneytown Pike

Enter roundabout onto MD 140 / Taneytown Pike

Roundabout - know your exit number before entering

4
20.5 mi into trip | ~33m in | Reindollar Street

Turn left onto Reindollar Street

Navigation decision point

Main Roads

Road Distance Duration
Taneytown Pike 9.4 mi 13m
Hampstead Mexico Road 5.4 mi 8m
Manchester Road 2.1 mi 3m
East Baltimore Street 1.2 mi 3m
College View Boulevard 0.7 mi <1m
Main Street 0.6 mi 1m
Baltimore Boulevard 0.5 mi <1m
Hahn Road 0.4 mi <1m
Longest stretch: Taneytown Pike — 9.4 mi, about 13m

Turn-by-Turn Driving Directions

Step-by-step road directions between Hampstead, MD and Taneytown, MD.

1

Start on Shiloh Avenue

33 ft · 8 sec · Shiloh Avenue
2

Turn left onto Main Street

0.6 mi · 1 min · Main Street
3

Turn left onto Hampstead Mexico Road

0.7 mi · 1 min · Hampstead Mexico Road
4

Enter the roundabout and take exit 2 toward Hampstead Mexico Road

167 ft · 7 sec · Hampstead Mexico Road
5

Exit the roundabout onto Hampstead Mexico Road

4.7 mi · 7 min · Hampstead Mexico Road
6

Turn left onto Manchester Road

2.1 mi · 3 min · Manchester Road
7

Turn right onto Hahn Road

0.4 mi · 54 sec · Hahn Road
8

Continue on Englar Road

0.2 mi · 32 sec · Englar Road
9

Turn right onto Baltimore Boulevard

0.5 mi · 51 sec · Baltimore Boulevard
10

Continue on College View Boulevard

0.7 mi · 55 sec · College View Boulevard
11

Continue on Taneytown Pike

9.3 mi · 12 min · Taneytown Pike
12

Enter the roundabout and take exit 1 toward Taneytown Pike

72 ft · 2 sec · Taneytown Pike
13

Exit the roundabout onto Taneytown Pike

236 ft · 7 sec · Taneytown Pike
14

Continue on East Baltimore Street

1.2 mi · 3 min · East Baltimore Street
15

Turn left onto Reindollar Street

30 ft · 1 sec · Reindollar Street
16

Arrive at your destination

Trip Plan

Morning Departure

Leave by 9 AM and you'll arrive before lunch.

Evening Departure

Even a 4 PM departure gets you there before dark in summer.

You can normally do this drive in one day.
You may only need one short stretch break if traffic stays light.
The halfway point lands around 10.3 miles from Hampstead, MD, or about 17m into the drive.
The longest continuous stretch on this route runs about 9.4 miles.

This is a comfortable same-day trip.

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 20.5 miles or 33m in

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 10.3 miles or 17m in

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Final hour starts around 27m

Traffic, exits, and arrival timing usually matter more near Taneytown, MD than in the middle of the route.

Before You Leave

+

Open the route before leaving Hampstead, MD so your first major turns are already loaded.

+

Leave with enough water and a charging cable within reach, not packed away.

+

Check your fuel range against the first long segment, especially if you are starting outside city service areas.

Day 1

Settle into the route from Hampstead, MD

This is one driving day of about 20.5 miles and 33m.

Your first comfortable stop window is around 80 miles from Hampstead, MD.
This route can stay practical as a one-day drive if traffic stays reasonable.
You may only need one short stretch stop if conditions stay smooth.
The longest stretch is on Taneytown Pike for about 9.4 miles.

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 10.3 mi from Hampstead, MD · 17m into the drive

Downtown Vestal, NY, NY

Mid-route town

Meal stop

Vestal, NY

10 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Pacing Suggestions

Waverly, NY

Fuel and coffee

A short stop after about 20.5 miles helps settle the day before fatigue starts building.

Waverly, NY

Meal break

The midpoint is around 10.3 miles from Hampstead, MD, which is a good place for a longer meal and fuel stop.

Arriving in Taneytown, MD

The final approach into Taneytown, MD usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Taneytown, MD.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

National Parks Near This Route

Worth a detour if your schedule allows.

Monocacy National Battlefield

Monocacy National Battlefield

National Battlefield

During the summer of 1864, the Confederacy carried out a bold plan to turn the tide of the Civil War in their favor. They planned to capture Washington, DC and influence the election of 1864. On July...

24 mi from route ~59 min detour Free near mile 19.8
View on nps.gov

Park data from the National Park Service API. Alerts update every 2 hours.

Fuel & Cost

Regular Gas

$3.39 one way

$6.78 round trip

$4.20/gal 25.4 MPG avg 7 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.60 $3.71 $7.42
premium $4.92 $3.97 $7.94
diesel $5.64 $4.55 $9.11

No toll roads detected on this route.

Estimated Trip Cost (one way, 1 person)

Fuel

$3

Meals

$25–$50

Total

$28–$53

Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.

Estimated CO2 emission: 7.2 kg one way. Prices: EIA weekly data, 2026-04-06.

Driving Electric?

About $2 in charging · 0 stops · 71% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 6.1 0 $2.15 $0.98
Efficient EV 5.1 0 $1.79 $0.82
EV Truck/SUV 8.2 0 $2.87 $1.31

Gas CO2

7 kg

EV CO2

2 kg (71% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast data refreshed 1 day ago

Origin

Hampstead, MD

Morning in Hampstead on Monday

Local time

8:20 AM

EDT

Current temp

83°F

Unavailable

Live forecast

Destination

Taneytown, MD

Morning in Taneytown on Monday

Local time

8:20 AM

EDT

Current temp

60°F

Unavailable

Live forecast

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.

Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.

Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

23 degrees cooler at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

33m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Hampstead, MD to Taneytown, MD covers 20.5 miles and takes about 33m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are Taneytown Pike, Hampstead Mexico Road, Manchester Road. Expect a mix of highway and local road driving.
This is a comfortable same-day trip.
The midpoint is about 10.3 miles from Hampstead, MD. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $3.39 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
This is a straightforward 33m drive. You will face about 8 decision points, but nothing that requires special attention if you follow navigation.
The main spots that need attention: near the start (MD 30 Business / Main Street): Navigation decision point; at 0.6 miles (MD 482 / Hampstead Mexico Road): Lane positioning matters here; at 1.3 miles (MD 482 / Hampstead Mexico Road): Roundabout - know your exit number before entering.
The route from Hampstead, MD to Taneytown, MD does not surface many named destination signs beyond the main corridor.

Was this route helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

More trips to Taneytown, MD

Explore more options from Hampstead, MD or browse trips ending in Taneytown, MD.

Looking for more statewide routes? Browse MD road trips.

Explore maps for Hampstead, MD or Taneytown, MD on MapSof.net.