Origin
Hannahs Mill, GA
Afternoon in Hannahs Mill on Friday
Local time
1:22 PM
EDT
Current temp
76°F
Unavailable
Compiled and reviewed by the Trip.ovh planning team at COD Solutions Oy · Last reviewed Apr 17, 2026 · Editorial standards
Drive Time
1h 29m
Distance
60.6 mi
98 km
Drive Score
8/10
Great drive
Same Day?
Yes, doable
Fuel Cost
$9
one way
EV Charging
Unknown
Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.
Hannahs Mill, GA
Alexander Krivitskiy
The drive from Hannahs Mill, GA to Columbus, GA covers 60.6 miles and takes about 1h 29m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.
The route leans on Warm Springs Road, Woodland Road, GA 36 for much of the mileage, and the overall profile is turn-heavy local drive. The longest uninterrupted segment is about 18.6 miles on Warm Springs Road. At current regular gas prices, budget about $9.48 one way before food or hotel costs.
Weekend Trip
Doable as a same-day drive at 1h 29m. Total distance: 60.6 miles.
Family Friendly
Moderate complexity with 0 natural rest stops along the way.
Solo Traveler
1h 29m drive, comfortable solo distance.
EV Driver
0 DC fast chargers along the route. Coverage: unknown.
First-Time Driver
Mostly highway driving (26%). Some complex stretches to watch for.
Scenic Drive
Turn-heavy local drive route profile.
Expect a 1h 29m drive with frequent turns across 60.6 miles of local and secondary roads.
Expect a hands-on drive with frequent turns and local roads rather than long highway stretches. You will hit about 11 points where you need to pay attention to lane position or signs. The trickiest moment comes around 0.1 miles in near Jeff Davis Road.
Moderate - straightforward overall, but long enough or busy enough to require pacing
Balances navigation complexity with total wheel time.
This drive requires moderate attention. Across 60.6 miles you will encounter 11 spots where lane choice or exit timing matters. Not difficult for experienced highway drivers, but worth previewing the tricky sections before you go.
Where does it get tricky?
The main spots that need attention: at 0.1 miles (Jeff Davis Road): Navigation decision point; at 1 miles (US 19; GA 3): Lane positioning matters here; at 24.3 miles (GA 36): Lane positioning matters here.
These are the spots where you need to pay the most attention. Preview them before you drive.
Turn right onto Jeff Davis Road
Navigation decision point
Turn right onto US 19; GA 3
Lane positioning matters here
Turn right onto GA 36
Lane positioning matters here
Turn left onto US 27 Alternate; GA 85 / Warm Springs Road
Lane positioning matters here
Turn sharp left onto 10th Avenue
Sharp turn - reduce speed on approach
| Road | Distance | Duration |
|---|---|---|
| Warm Springs Road | 18.6 mi | 24m |
| Woodland Road | 12.1 mi | 17m |
| GA 36 | 10.3 mi | 14m |
| 1st Street | 4 mi | 5m |
| US 19 | 3.3 mi | 6m |
| South Green Street | 1.9 mi | 3m |
| GA 208 | 1.9 mi | 2m |
| Manchester Highway | 1.8 mi | 2m |
Step-by-step road directions between Hannahs Mill, GA and Columbus, GA.
Start on Church Road
Turn right onto Jeff Davis Road
Turn right onto US 19; GA 3
Turn right onto GA 36; GA 74
Turn left onto GA 36; GA 74
Continue on GA 36
Continue on GA 36
Continue on GA 36
Turn left onto GA 36; GA 41
Turn right onto GA 36
Turn straight onto GA 208
Turn left onto US 27 Alternate; GA 85
Turn left onto University Avenue
Turn right onto GA 22 Spur
Continue on GA 22 Spur
Turn sharp left onto 10th Avenue
Turn right onto 10th Street
Turn left onto US 27; GA 1
Arrive at destination
Rest stops, refuel points, and overnight suggestions along this route.
Halfway Point
Midpoint
About 30.3 mi from Hannahs Mill, GA · 47m into the drive
Mid-route town
Meal stop
30 mi into the route
Best for: Lunch, fuel, and a longer reset
This sits close to the middle of the route, so it works well for the longest stop of the day.
A short stop after about 13 miles helps settle the day before fatigue starts building.
The midpoint is around 30.3 miles from Hannahs Mill, GA, which is a good place for a longer meal and fuel stop.
The final approach into Columbus, GA usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.
These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.
Regular Gas
$9.48 one way
$18.95 round trip
| Fuel Type | $/gal | One Way | Round Trip |
|---|---|---|---|
| midgrade | $4.34 | $10.36 | $20.72 |
| premium | $4.70 | $11.22 | $22.43 |
| diesel | $5.61 | $13.38 | $26.76 |
No toll roads detected on this route.
Drive Cost (one way)
Fuel
$9
Estimated CO2 emission: 21.2 kg one way. Prices: EIA weekly data, 2026-04-13.
Driving Electric?
About $6 in charging · 0 stops · 67% less CO2
| Vehicle Type | kWh | Stops | DC Fast | Home Charge |
|---|---|---|---|---|
| Average EV | 18.2 | 0 | $6.36 | $2.91 |
| Efficient EV | 15.2 | 0 | $5.30 | $2.42 |
| EV Truck/SUV | 24.2 | 0 | $8.48 | $3.88 |
Gas CO2
21 kg
EV CO2
7 kg (67% less)
This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.
DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.
Current conditions at both ends of the drive.
Origin
Afternoon in Hannahs Mill on Friday
Local time
1:22 PM
EDT
Current temp
76°F
Unavailable
Destination
Afternoon in Columbus on Friday
Local time
1:22 PM
EDT
Current temp
54°F
Unavailable
83°F
Sardis, GA
30 mi in
Time zone
Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.
Temperature spread
A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.
Road read
Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.
Weather data from the National Weather Service. Conditions may change; check closer to your travel date.
Compiled by the Trip.ovh planning team at COD Solutions Oy from open government datasets — OSRM over OpenStreetMap for geometry, and EIA for fuel prices. See our methodology for refresh cadence and limitations.
Was this helpful?
Thanks for your feedback!
Your tip has been submitted. Thanks!
/500
Recent Tips
·
Explore more options from Hannahs Mill, GA or browse trips ending in Columbus, GA.
Looking for more statewide routes? Browse GA road trips.