Trip from Huber Heights, OH to Dublin, OH

Drive Time

1h 6m

Distance

66.7 mi

107 km

Drive Score

7/10

Good drive

Same Day?

Yes, doable

Fuel Cost

$10

one way

EV Charging

Loading...

station data

Best Time to Leave

Save up to 16 min

4 AM

1h 1m ★

6 AM

1h 6m

8 AM

1h 17m

10 AM

1h 10m

12 PM

1h 9m

3 PM

1h 10m

5 PM

1h 16m

8 PM

1h 3m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

Best Time Drive vs Fly

Google Maps Waze Apple Maps

Download GPX

Trip Overview

If you are planning to travel from Huber Heights to Dublin, expect a straightforward trip covering 66.7 miles. You can comfortably complete this journey in about 1 hour and 6 minutes, making it an ideal day trip that requires no overnight stops. Budgeting approximately $10 for fuel should cover your needs for the duration of the drive. The route transitions through the heart of the Midwest, moving you across the Ohio landscape efficiently. Since there are zero scheduled stops, you have the flexibility to head straight to your destination without interruptions. This is a practical, no-nonsense commute that gets you from point A to point B with minimal logistical planning.

Trip Pace

Same-day drive is realistic

A same-day return is realistic if you keep stops short.

Break Rhythm

0 planned breaks

A short stop every 2 to 3 hours is enough for this drive.

Midpoint

33.3 miles from Huber Heights, OH

A natural place for your longest stop of the day , about 33m into the drive .

Drive Character

This trip functions as a turn-heavy local drive rather than a high-speed interstate haul. While you will utilize I-70 East as part of your navigation, the route relies heavily on local arteries like Chambersburg Road and Brandt Pike. Because the highway share is 0%, you should prepare for a more involved experience behind the wheel compared to a standard freeway cruise. There is no long, monotonous interstate stretch to zone out on, as the longest uninterrupted segment on Chambersburg Road is 0 miles. Expect a hands-on driving experience that requires your full attention as you navigate the local road network.

This route has more turning and local-road decision points than a simple highway run.

There are about 15 navigation steps in the underlying route data, so the final approach matters more than the middle miles.

Chambersburg Road is one of the defining roads on this drive.

How Hard Is This Drive?

Expect a hands-on drive with frequent turns and local roads rather than long highway stretches. Navigation is very simple — set it and forget it for most of the drive.

Route Complexity 1/10

Very easy - short and simple to drive

The drive from Huber Heights, OH to Dublin, OH is easy. At 1h 6m with 0% highway, most drivers will find it relaxed and low-stress.

Where does it get tricky?

This route does not have any notably tricky sections. Most of the drive from Huber Heights, OH to Dublin, OH is straightforward, with well-signed roads and simple exits.

Main Roads

Road	Distance	Duration
Chambersburg Road	Unavailable	Refreshing
Brandt Pike	Unavailable	Refreshing
I 70 East	Unavailable	Refreshing
I 270	Unavailable	Refreshing
I 270 North	Unavailable	Refreshing
Jack Nicklaus Freeway	Unavailable	Refreshing
US 33 East	Unavailable	Refreshing
Mill Lane	Unavailable	Refreshing

Per-road distance and duration are being refreshed from OSRM for this route.

Longest stretch: Chambersburg Road — detailed segment metrics are refreshing.

Turn-by-Turn Driving Directions

Step-by-step road directions between Huber Heights, OH and Dublin, OH.

1

Start on Rosebury Drive

0.2 mi · 1 min · Rosebury Drive

2

Turn right onto Chambersburg Road

0.6 mi · 1 min · Chambersburg Road

3

Turn left onto Brandt Pike

1.6 mi · 3 min · Brandt Pike

4

Take the ramp right toward I 70 East: Columbus

0.3 mi · 38 sec · I 70 East: Columbus

5

Merge slight left

7.7 mi · 8 min

6

Keep slight left

46 mi · 49 min

7

Take the exit slight right toward I 270

0.2 mi · 24 sec · I 270

8

Keep slight left to continue on I 270 North

0.8 mi · 1 min · I 270 North

9

Keep slight left to continue on I 270 North: Cleveland

0.6 mi · 1 min · I 270 North: Cleveland

10

Merge slight left onto Jack Nicklaus Freeway

7.7 mi · 8 min · Jack Nicklaus Freeway

11

Take the exit slight right toward US 33 East, SR 161 East: Dublin

0.4 mi · 58 sec · US 33 East, SR 161 East: Dublin

12

Continue straight

0.9 mi · 2 min

13

Turn right onto Mill Lane

128 ft · 13 sec · Mill Lane

14

Turn left

105 ft · 8 sec

15

Arrive at your destination

Trip Plan

Since this is a relatively short trip, you have plenty of flexibility regarding your departure time. Aim to hit the road when local traffic is lightest to ensure you maintain that estimated 1-hour and 6-minute travel time. Because there are no designated stops on this route, make sure your vehicle is fueled up before you leave; setting aside $10 for gas will keep you on track. Keep a close eye on your navigation apps, as the turn-heavy nature of the local roads means you will need to watch for frequent lane changes and intersections. Taking the time to map out your specific turns on Chambersburg Road and Brandt Pike before heading out will save you from unnecessary confusion along the way.

Morning Departure

Leave by 9 AM and you'll arrive before lunch.

Evening Departure

Even a 4 PM departure gets you there before dark in summer.

You can normally do this drive in one day.

You may only need one short stretch break if traffic stays light.

The halfway point lands around 33.3 miles from Huber Heights, OH, or about 33m into the drive.

This is a comfortable same-day trip.

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 66.7 miles or 1h 6m in

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 33.3 miles or 33m in

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Final hour starts around 56m

Traffic, exits, and arrival timing usually matter more near Dublin, OH than in the middle of the route.

Before You Leave

+

Open the route before leaving Huber Heights, OH so your first major turns are already loaded.

+

Leave with enough water and a charging cable within reach, not packed away.

+

Check your fuel range against the first long segment, especially if you are starting outside city service areas.

Day 1

Settle into the route from Huber Heights, OH

This is one driving day of about 66.7 miles and 1h 6m.

Your first comfortable stop window is around 80 miles from Huber Heights, OH.

This route can stay practical as a one-day drive if traffic stays reasonable.

You may only need one short stretch stop if conditions stay smooth.

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 33.3 mi from Huber Heights, OH · 33m into the drive

Mid-route town

Meal stop

Beavercreek, OH

33 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Pacing Suggestions

Columbus, OH

Fuel and coffee

A short stop after about 66.7 miles helps settle the day before fatigue starts building.

Beavercreek, OH

Meal break

The midpoint is around 33.3 miles from Huber Heights, OH, which is a good place for a longer meal and fuel stop.

Arriving in Dublin, OH

The final approach into Dublin, OH usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Dublin, OH.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Regular Gas

$9.98 one way

$19.95 round trip

$3.80/gal 25.4 MPG avg 23 kg CO₂

Fuel Type	$/gal	One Way	Round Trip
midgrade	$4.24	$11.14	$22.28
premium	$4.79	$12.58	$25.16
diesel	$5.64	$14.82	$29.64

No toll roads detected on this route.

Estimated Trip Cost (one way, 1 person)

Fuel

$10

Meals

$25–$50

Total

$35–$60

Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.

Estimated CO2 emission: 23.3 kg one way. Prices: EIA weekly data, 2026-04-06.

Driving Electric?

About $7 in charging · 0 stops · 65% less CO₂

Vehicle Type	kWh	DC Fast	Home Charge
Average EV	20	$7.00	$3.20
Efficient EV	16.7	$5.84	$2.67
EV Truck/SUV	26.7	$9.34	$4.27

Gas CO2

23 kg

EV CO2

8 kg (65% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast data refreshed 3 days ago

Origin

Huber Heights, OH

Night in Huber Heights on Sunday

Local time

9:22 PM

EDT

Current temp

75°F

Unavailable

Live forecast

Destination

Dublin, OH

Night in Dublin on Sunday

Local time

9:22 PM

EDT

Current temp

73°F

Unavailable

Live forecast

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.

Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.

Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

2 degrees cooler at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

1h 6m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Huber Heights, OH to Dublin, OH covers 66.7 miles and takes about 1h 6m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.

The main roads are Chambersburg Road, Brandt Pike, I 70 East. Expect a mix of highway and local road driving.

This is a comfortable same-day trip.

The midpoint is about 33.3 miles from Huber Heights, OH. Look for rest areas, gas stations, or food options near the halfway mark.

At current regular gas prices, expect to spend about $9.98 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.

Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.

The drive from Huber Heights, OH to Dublin, OH is easy. At 1h 6m with 0% highway, most drivers will find it relaxed and low-stress.

This route does not have any notably tricky sections. Most of the drive from Huber Heights, OH to Dublin, OH is straightforward, with well-signed roads and simple exits.

The route from Huber Heights, OH to Dublin, OH does not surface many named destination signs beyond the main corridor.

Was this route helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Explore more options from Huber Heights, OH or browse trips ending in Dublin, OH.

Looking for more statewide routes? Browse OH road trips.

Explore maps for Huber Heights, OH or Dublin, OH on MapSof.net.