Trip from Kent, WA to Kingsgate, WA

Drive Time

37m

Distance

26.4 mi

43 km

Drive Score

6/10

Good drive

Same Day?

Yes, doable

Fuel Cost

$6

one way

EV Charging

Loading...

station data

Best Time to Leave

Save up to 10 min
4 AM
0h 34m ★
6 AM
0h 37m
8 AM
0h 44m
10 AM
0h 40m
12 PM
0h 39m
3 PM
0h 40m
5 PM
0h 43m
8 PM
0h 35m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

Downtown Kingsgate, WA, WA

Kingsgate, WA

Alexander F Ungerer

Trip Overview

If you are traveling from Kent to Kingsgate, you are looking at a quick 26.4-mile trek through the Pacific Coast region. This drive typically takes about 37 minutes, making it a straightforward day trip that requires no overnight stops. With a fuel budget of approximately $6, it is an economical route for commuters or weekend errands. You will primarily utilize I-405, the Valley Freeway, and 121st Avenue Northeast to navigate between these two Washington locations. Because the trip is short and efficient, it is ideal for those who prefer to spend less time behind the wheel and more time at their destination.

Trip Pace

Same-day drive is realistic

A same-day return is realistic if you keep stops short.

Break Rhythm

0 planned breaks

A short stop every 2 to 3 hours is enough for this drive.

Midpoint

13.2 miles from Kent, WA

A natural place for your longest stop of the day , about 18m into the drive .

Drive Character

Expect a highway-focused experience, as 87% of this journey is spent on major thoroughfares. The core of your drive features a 17.1-mile stretch on I-405, which serves as the backbone of the trip. While the route begins with the Valley Freeway, the transition to interstate travel keeps the pace consistent and relatively fast. You won't encounter technical, winding backroads here, as the character of this drive is defined by efficient, high-speed transit. It is a functional, no-nonsense path that prioritizes speed and directness over leisurely scenic detours.

Most of the miles stay on highways, which makes pacing and fuel planning easier than turn-by-turn city driving.
There are about 16 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
I 405 is the longest continuous segment at about 17.1 miles.

How Hard Is This Drive?

This is a straightforward highway drive that stays mostly on I 405 and Valley Freeway. This route has several spots where lane changes, forks, or exits need your full attention. The trickiest moment comes around 1 miles in near WA 167 / Valley Freeway.

Route Complexity 9/10

High effort - long or complex enough to need steady focus all day

This is a demanding drive. With 11 significant decision points across 26.4 miles, you will need to stay alert — especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.

Where does it get tricky?

The main spots that need attention: at 1 miles (WA 167 / Valley Freeway): Merge point - match speed before joining. Lane positioning matters here; at 6.9 miles: Exit ramp - move to the correct lane early. Lane positioning matters here; at 24.4 miles (I 405): Highway fork - watch signs carefully. Lane positioning matters here.

Critical Maneuvers

5 of 11 key points

These are the spots where you need to pay the most attention. Preview them before you drive.

5
1 mi into trip | ~2m in | WA 167 / Valley Freeway

Merge onto WA 167 / Valley Freeway

Merge point - match speed before joining. Lane positioning matters here

Use the none / straight / slight right lanes.
6
6.9 mi into trip | ~9m in

Take the exit toward I 405 North: Bellevue

Exit ramp - move to the correct lane early. Lane positioning matters here

Use the slight right lane. Toward I 405 North: Bellevue
6
24.4 mi into trip | ~31m in | I 405

Keep slight right at fork onto I 405

Highway fork - watch signs carefully. Lane positioning matters here

Use the none / straight / slight right lanes.
8
24.8 mi into trip | ~32m in

Take the exit toward Northeast 124th Street, Totem Lake Boulevard

Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one

Use the straight / slight right lanes. Exit 20B Toward Northeast 124th Street, Totem Lake Boule...
8
24.9 mi into trip | ~32m in

Keep slight right at fork toward Totem Lake Boulevard

Highway fork - watch signs carefully. Lane positioning matters here

Use the straight / slight right lanes. Toward Totem Lake Boulevard

Main Roads

Road Distance Duration
I 405 17.1 mi 21m
Valley Freeway 5.9 mi 7m
121st Avenue Northeast 0.6 mi 1m
120th Avenue Northeast 0.6 mi 1m
West Willis Street 0.2 mi <1m
4th Avenue South 0.2 mi <1m
West Gowe Street 0.1 mi <1m
Northeast 132nd Street <0.1 mi <1m
Longest stretch: I 405 — 17.1 mi, about 21m

Turn-by-Turn Driving Directions

Step-by-step road directions between Kent, WA and Kingsgate, WA.

1

Start on 2nd Avenue South

10 ft · 4 sec · 2nd Avenue South
2

Turn right onto West Gowe Street

0.1 mi · 24 sec · West Gowe Street
3

Turn left onto 4th Avenue South

0.2 mi · 23 sec · 4th Avenue South
4

Turn slight right

182 ft · 6 sec
5

Turn straight onto WA 516

0.2 mi · 32 sec · West Willis Street
6

Take the ramp

0.4 mi · 45 sec
Toward WA 167 North: Renton
7

Merge onto WA 167

5.9 mi · 7 min · Valley Freeway
Use the none / straight / slight right lanes.
8

Take the exit

0.8 mi · 1 min
Toward I 405 North: Bellevue Use the slight right lane.
9

Merge onto I 405

17 mi · 20 min · I 405
Use the none lane.
10

Keep slight right at fork onto I 405

0.4 mi · 31 sec · I 405
Use the none / straight / slight right lanes.
11

Take the exit

0.1 mi · 15 sec
Exit 20B Toward Northeast 124th Street, Totem Lake Boulevard Use the straight / slight right lanes.
12

Keep slight right at fork

0.2 mi · 28 sec
Toward Totem Lake Boulevard Use the straight / slight right lanes.
13

Continue on 120th Avenue Northeast

0.6 mi · 1 min · 120th Avenue Northeast
Use the straight / left lanes.
14

Turn right onto Northeast 132nd Street

522 ft · 19 sec · Northeast 132nd Street
Use the none lane.
15

Turn left onto 121st Avenue Northeast

0.6 mi · 1 min · 121st Avenue Northeast
Use the left lane.
16

Arrive at destination

121st Avenue Northeast

Trip Plan

Since this is a short, 37-minute run, you have plenty of flexibility regarding your departure time. You can easily complete the entire 26.4-mile distance without needing to plan for rest stops or food breaks along the way. Keep in mind that the majority of your time will be spent on I-405, so checking local traffic reports before you leave Kent is a smart way to avoid potential congestion. Given the $6 fuel estimate, topping off your tank before you head out ensures you won't have to worry about mid-trip refueling. Use the simplicity of this route to your advantage and plan your departure around your own schedule rather than worrying about strict timing or long-distance logistics.

Morning Departure

Leave by 9 AM and you'll arrive before lunch.

Evening Departure

Even a 4 PM departure gets you there before dark in summer.

You can normally do this drive in one day.
You may only need one short stretch break if traffic stays light.
The halfway point lands around 13.2 miles from Kent, WA, or about 18m into the drive.
The longest continuous stretch on this route runs about 17.1 miles.

This is a comfortable same-day trip.

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 26.4 miles or 37m in

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 13.2 miles or 18m in

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Final hour starts around 29m

Traffic, exits, and arrival timing usually matter more near Kingsgate, WA than in the middle of the route.

Before You Leave

+

Open the route before leaving Kent, WA so your first major turns are already loaded.

+

Leave with enough water and a charging cable within reach, not packed away.

+

Check your fuel range against the first long segment, especially if you are starting outside city service areas.

Day 1

Settle into the route from Kent, WA

This is one driving day of about 26.4 miles and 37m.

Your first comfortable stop window is around 80 miles from Kent, WA.
This route can stay practical as a one-day drive if traffic stays reasonable.
You may only need one short stretch stop if conditions stay smooth.
The longest stretch is on I 405 for about 17.1 miles.

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 13.2 mi from Kent, WA · 18m into the drive

Mid-route town

Meal stop

Renton, WA

13 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Pacing Suggestions

Kenmore, WA

Fuel and coffee

A short stop after about 26.4 miles helps settle the day before fatigue starts building.

Renton, WA

Meal break

The midpoint is around 13.2 miles from Kent, WA, which is a good place for a longer meal and fuel stop.

Arriving in Kingsgate, WA

The final approach into Kingsgate, WA usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Kingsgate, WA.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Regular Gas

$5.54 one way

$11.08 round trip

$5.33/gal 25.4 MPG avg 9 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $5.57 $5.79 $11.57
premium $5.77 $6.00 $12.00
diesel $5.64 $5.87 $11.73

No toll roads detected on this route.

Estimated Trip Cost (one way, 1 person)

Fuel

$6

Meals

$25–$50

Total

$31–$56

Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.

Estimated CO2 emission: 9.2 kg one way. Prices: EIA weekly data, 2026-04-06.

Driving Electric?

About $3 in charging · 0 stops · 67% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 7.9 0 $2.77 $1.27
Efficient EV 6.6 0 $2.31 $1.06
EV Truck/SUV 10.6 0 $3.70 $1.69

Gas CO2

9 kg

EV CO2

3 kg (67% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast data refreshed 3 days ago

Origin

Kent, WA

Evening in Kent on Sunday

Local time

8:53 PM

PDT

Current temp

38°F

Unavailable

Live forecast

Destination

Kingsgate, WA

Evening in Kingsgate on Sunday

Local time

8:53 PM

PDT

Current temp

53°F

Unavailable

Live forecast

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.

Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.

Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

15 degrees warmer at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

37m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Kent, WA to Kingsgate, WA covers 26.4 miles and takes about 37m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are I 405, Valley Freeway, 121st Avenue Northeast. Most of the drive stays on highways, so watch for ramps and exits.
This is a comfortable same-day trip.
The midpoint is about 13.2 miles from Kent, WA. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $5.54 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
This is a demanding drive. With 11 significant decision points across 26.4 miles, you will need to stay alert — especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.
The main spots that need attention: at 1 miles (WA 167 / Valley Freeway): Merge point - match speed before joining. Lane positioning matters here; at 6.9 miles: Exit ramp - move to the correct lane early. Lane positioning matters here; at 24.4 miles (I 405): Highway fork - watch signs carefully. Lane positioning matters here.
The route from Kent, WA to Kingsgate, WA does not surface many named destination signs beyond the main corridor.

Was this route helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Return Trip

Kingsgate, WA to Kent, WA

Plan the drive back the other way.

26.3 mi 38m

More trips to Kingsgate, WA

Explore more options from Kent, WA or browse trips ending in Kingsgate, WA.

Looking for more statewide routes? Browse WA road trips.

Explore maps for Kent, WA or Kingsgate, WA on MapSof.net.