Trip from Lumberton, NC to City of Greenville, NC

Drive Time

2h 11m

Distance

143.2 mi

231 km

Drive Score

8/10

Great drive

Same Day?

Yes, doable

Fuel Cost

$23

one way

EV Charging

Loading...

station data

Best Time to Leave

Save up to 28 min
4 AM
2h 2m ★
6 AM
2h 11m
8 AM
2h 30m
10 AM
2h 18m
12 PM
2h 16m
3 PM
2h 19m
5 PM
2h 29m
8 PM
2h 6m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

Downtown Lumberton, NC, NC

Lumberton, NC

Michael Ken

Downtown City of Greenville, NC, NC

City of Greenville, NC

Alex Borelli

Trip Overview

Stretching 143.2 miles across North Carolina, this trip from Lumberton to Greenville typically takes about 2 hours and 11 minutes of driving time. Because this route focuses on local roads rather than interstate travel, it is best suited as a straightforward one-day excursion. You should budget approximately $22 for fuel to cover the distance between these two Southeast locations. Since the drive is relatively short and direct, you won't need to worry about booking an overnight stay unless your schedule requires extra flexibility. This is a practical, no-nonsense path that keeps you moving through the heart of the state.

Trip Pace

Same-day drive is realistic

A same-day return is realistic if you keep stops short.

Break Rhythm

0 planned breaks

A short stop every 2 to 3 hours is enough for this drive.

Midpoint

71.6 miles from Lumberton, NC

A natural place for your longest stop of the day , about 1h 5m into the drive .

Drive Character

Expect a turn-heavy, local experience rather than a high-speed interstate grind, as this route maintains a 0% highway share. You will navigate through various local corridors, utilizing North Water Street, Carthage Road, and Capuano Street to reach your destination. Because there are no long, uninterrupted highway stretches—with the longest segment on North Water Street effectively being 0 miles—you will need to stay alert for frequent turns. The road’s personality is defined by its constant navigation through local infrastructure, providing a distinct change of pace from typical highway driving.

This route has more turning and local-road decision points than a simple highway run.
There are about 15 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
North Water Street is one of the defining roads on this drive.

How Hard Is This Drive?

Expect a hands-on drive with frequent turns and local roads rather than long highway stretches. Navigation is very simple — set it and forget it for most of the drive.

Route Complexity 1/10

Very easy - short and simple to drive

The drive from Lumberton, NC to City of Greenville, NC is easy. At 2h 11m with 0% highway, most drivers will find it relaxed and low-stress.

Where does it get tricky?

This route does not have any notably tricky sections. Most of the drive from Lumberton, NC to City of Greenville, NC is straightforward, with well-signed roads and simple exits.

Main Roads

Road Distance Duration
North Water Street Unavailable Refreshing
Carthage Road Unavailable Refreshing
Capuano Street Unavailable Refreshing
US 301 Unavailable Refreshing
South Church Street Unavailable Refreshing
Stantonsburg Road Unavailable Refreshing
West Arlington Boulevard Unavailable Refreshing
South Evans Street Unavailable Refreshing

Per-road distance and duration are being refreshed from OSRM for this route.

Longest stretch: North Water Street — detailed segment metrics are refreshing.

Turn-by-Turn Driving Directions

Step-by-step road directions between Lumberton, NC and City of Greenville, NC.

1

Start on North Water Street

0.2 mi · 20 sec · North Water Street
2

Enter the roundabout and take exit 2 toward North Water Street

220 ft · 4 sec · North Water Street
3

Exit the roundabout onto North Water Street

0.2 mi · 22 sec · North Water Street
4

Turn straight onto Carthage Road

1.1 mi · 1 min · Carthage Road
5

Turn right onto Capuano Street

151 ft · 7 sec · Capuano Street
6

Take the ramp straight

0.1 mi · 16 sec
7

Merge slight left

88 mi · 1 hr 40 min
8

Take the exit slight right toward US 301: Kenly, Wilson

0.3 mi · 35 sec · US 301: Kenly, Wilson
9

Turn right onto South Church Street

12 mi · 17 min · South Church Street
10

Take the exit right

0.3 mi · 45 sec
11

Merge slight left

32 mi · 33 min
12

Turn straight onto Stantonsburg Road

1.5 mi · 2 min · Stantonsburg Road
13

Turn right onto West Arlington Boulevard

2.4 mi · 4 min · West Arlington Boulevard
14

Turn left onto South Evans Street

0.4 mi · 35 sec · South Evans Street
15

Arrive at your destination

Trip Plan

Since your total drive time is just over two hours, you have the advantage of being able to depart at almost any time of day without needing an elaborate itinerary. While there are no scheduled stops in the current plan, keep in mind that the turn-heavy nature of these local roads requires your full attention, so plan for a few quick breaks if you feel fatigued. Check your fuel levels before leaving Lumberton, as the $22 estimated cost assumes a steady journey. A concrete tip for this route: keep your GPS active and accessible, as the reliance on local streets like Carthage Road and Capuano Street involves frequent navigation changes that are easy to miss if you aren't paying close attention.

Morning Departure

Leave by 9 AM and you'll arrive before lunch.

Evening Departure

Even a 4 PM departure gets you there before dark in summer.

You can normally do this drive in one day.
You may only need one short stretch break if traffic stays light.
The halfway point lands around 71.6 miles from Lumberton, NC, or about 1h 5m into the drive.

This is a comfortable same-day trip.

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 80 miles or 1h 13m in

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 71.6 miles or 1h 5m in

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Final hour starts around 1h 47m

Traffic, exits, and arrival timing usually matter more near City of Greenville, NC than in the middle of the route.

Before You Leave

+

Open the route before leaving Lumberton, NC so your first major turns are already loaded.

+

Leave with enough water and a charging cable within reach, not packed away.

+

Check your fuel range against the first long segment, especially if you are starting outside city service areas.

Day 1

Settle into the route from Lumberton, NC

This is one driving day of about 143.2 miles and 2h 11m.

Your first comfortable stop window is around 80 miles from Lumberton, NC.
This route can stay practical as a one-day drive if traffic stays reasonable.
You may only need one short stretch stop if conditions stay smooth.

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 71.6 mi from Lumberton, NC · 1h 5m into the drive

Downtown Goldsboro, NC, NC

Mid-route town

Meal stop

Goldsboro, NC

72 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Pacing Suggestions

Goldsboro, NC

Fuel and coffee

A short stop after about 80 miles helps settle the day before fatigue starts building.

Goldsboro, NC

Meal break

The midpoint is around 71.6 miles from Lumberton, NC, which is a good place for a longer meal and fuel stop.

Arriving in City of Greenville, NC

The final approach into City of Greenville, NC usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around City of Greenville, NC.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Regular Gas

$22.92 one way

$45.84 round trip

$4.07/gal 25.4 MPG avg 50 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.43 $24.97 $49.94
premium $4.78 $26.94 $53.87
diesel $5.64 $31.81 $63.63

No toll roads detected on this route.

Estimated Trip Cost (one way, 1 person)

Fuel

$23

Meals

$25–$50

Total

$48–$73

Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.

Estimated CO2 emission: 50.1 kg one way. Prices: EIA weekly data, 2026-04-06.

Driving Electric?

About $15 in charging · 0 stops · 66% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 43 0 $15.04 $6.87
Efficient EV 35.8 0 $12.53 $5.73
EV Truck/SUV 57.3 0 $20.05 $9.16

Gas CO2

50 kg

EV CO2

17 kg (66% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast data refreshed 3 days ago

Origin

Lumberton, NC

Evening in Lumberton on Sunday

Local time

6:42 PM

EDT

Current temp

63°F

Unavailable

Live forecast

Destination

City of Greenville, NC

Evening in City of Greenville on Sunday

Local time

6:42 PM

EDT

Current temp

66°F

Unavailable

Live forecast

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.

Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.

Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

3 degrees warmer at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

2h 11m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Lumberton, NC to City of Greenville, NC covers 143.2 miles and takes about 2h 11m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are North Water Street, Carthage Road, Capuano Street. Expect a mix of highway and local road driving.
This is a comfortable same-day trip.
The midpoint is about 71.6 miles from Lumberton, NC. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $22.92 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
The drive from Lumberton, NC to City of Greenville, NC is easy. At 2h 11m with 0% highway, most drivers will find it relaxed and low-stress.
This route does not have any notably tricky sections. Most of the drive from Lumberton, NC to City of Greenville, NC is straightforward, with well-signed roads and simple exits.
The route from Lumberton, NC to City of Greenville, NC does not surface many named destination signs beyond the main corridor.

Was this route helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Explore more options from Lumberton, NC or browse trips ending in City of Greenville, NC.

Looking for more statewide routes? Browse NC road trips.

Explore maps for Lumberton, NC or City of Greenville, NC on MapSof.net.