Origin
Lumberton, NJ
Night in Lumberton on Wednesday
Local time
10:45 PM
EDT
Current temp
46°F
Unavailable
Live forecast
Trip from Lumberton, NJ to Bellview, NJ
Last recalculated Apr 16, 2026
Drive Time
23m
Distance
14.6 mi
23 km
Drive Score
8/10
Great drive
Same Day?
Yes, doable
Fuel Cost
$2
one way
Best Time to Leave
4 AM
0h 21m
★
6 AM
0h 23m
8 AM
0h 27m
10 AM
0h 25m
12 PM
0h 24m
3 PM
0h 25m
5 PM
0h 27m
8 PM
0h 22m
Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.
Lumberton, NJ
Wikimedia Commons
Bellview, NJ
Aisling Kerr
Trip Overview
The drive from Lumberton, NJ to Bellview, NJ covers 14.6 miles and takes about 23m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.
The route leans on State Route 38, Hartford Road, South Bridgeboro Street for much of the mileage, and the overall profile is mixed drive. The longest uninterrupted segment is about 4.5 miles on State Route 38. At current regular gas prices, budget about $2.42 one way before food or hotel costs.
Trip Pace
Same-day drive is realistic
A same-day return is realistic if you keep stops short.
Break Rhythm
0 planned breaks
This drive is short enough that no stops are needed.
Midpoint
7.3 miles from Lumberton, NJ
A natural place for your longest stop of the day , about 10m into the drive .
Drive Character
The drive from Lumberton, NJ to Bellview, NJ covers 14.6 miles and takes about 23m, using a mix of highways and local roads.
Expect a mix of faster highway mileage and slower local approaches near the beginning or end.
There are about 12 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
State Route 38 is the longest continuous segment at about 4.5 miles.
How Hard Is This Drive?
This route mixes highway mileage with some local-road sections near the start or finish. There are only a few real navigation decisions along the way. The trickiest moment comes around 0.5 miles in near CR 541 / Mount Holly Bypass.
Route Complexity
4/10
Easy - simple navigation with a manageable amount of wheel time
This is a straightforward 23m drive. You will face about 8 decision points, but nothing that requires special attention if you follow navigation.
Where does it get tricky?
The main spots that need attention: at 0.5 miles (CR 541 / Mount Holly Bypass): Navigation decision point; at 1.3 miles (NJ 38 / State Route 38): Lane positioning matters here; at 5.8 miles (CR 686 / Hartford Road): Navigation decision point.
Critical Maneuvers
5 of 8 key pointsThese are the spots where you need to pay the most attention. Preview them before you drive.
4
0.5 mi into trip
|
~0m in
|
CR 541 / Mount Holly Bypass
Turn left onto CR 541 / Mount Holly Bypass
Navigation decision point
4
1.3 mi into trip
|
~2m in
|
NJ 38 / State Route 38
Turn left onto NJ 38 / State Route 38
Lane positioning matters here
Use the left lane.
3
5.8 mi into trip
|
~7m in
|
CR 686 / Hartford Road
Turn right onto CR 686 / Hartford Road
Navigation decision point
3
9.7 mi into trip
|
~14m in
|
CR 613 / Bridgeboro Road
Turn right onto CR 613 / Bridgeboro Road
Navigation decision point
5
12.5 mi into trip
|
~19m in
|
Fairview Street
Turn right onto Fairview Street
Navigation decision point
Main Roads
| Road | Distance | Duration |
|---|---|---|
| State Route 38 | 4.5 mi | 5m |
| Hartford Road | 3.9 mi | 6m |
| South Bridgeboro Street | 1.9 mi | 4m |
| Saint Mihiel Drive | 1.3 mi | 2m |
| Mount Holly Bypass | 0.8 mi | 1m |
| Broad Street | 0.7 mi | 1m |
| Bridgeboro Road | 0.6 mi | <1m |
| Main Street | 0.5 mi | <1m |
Longest stretch:
State Route 38
— 4.5 mi, about 5m
Turn-by-Turn Driving Directions
Step-by-step road directions between Lumberton, NJ and Bellview, NJ.
1
Start on CR 541
0.5 mi
·
53 sec
·
Main Street
2
Turn left onto CR 541
0.8 mi
·
1 min
·
Mount Holly Bypass
3
Turn left onto NJ 38
4.5 mi
·
5 min
·
State Route 38
Use the left lane.
4
Turn right onto CR 686
3.9 mi
·
6 min
·
Hartford Road
5
Turn right onto CR 613
0.6 mi
·
49 sec
·
Bridgeboro Road
6
Continue on CR 613
1.9 mi
·
4 min
·
South Bridgeboro Street
7
Turn left onto CR 613
0.3 mi
·
33 sec
·
East Scott Street
8
Turn right onto Fairview Street
121 ft
·
9 sec
·
Fairview Street
9
Turn left onto CR 543
1.3 mi
·
2 min
·
Saint Mihiel Drive
10
Continue on CR 543
0.7 mi
·
1 min
·
Broad Street
11
Turn right onto Kern Street
301 ft
·
13 sec
·
Kern Street
12
Arrive at destination
Kern Street
Trip Plan
Morning Departure
Leave by 9 AM and you'll arrive before lunch.
Evening Departure
Even a 4 PM departure gets you there before dark in summer.
You can normally do this drive in one day.
You may only need one short stretch break if traffic stays light.
The halfway point lands around 7.3 miles from Lumberton, NJ, or about 10m into the drive.
The longest continuous stretch on this route runs about 4.5 miles.
This is a comfortable same-day trip.
Departure
Before you leave
Start with fuel, water, and navigation already sorted so the first hour feels easy.
First stop
Around 14.6 miles or 23m in
Use this first pause for coffee, a restroom break, and a quick traffic check ahead.
Halfway reset
Around 7.3 miles or 10m in
This is the best place for your longest stop, a real meal, and a full fuel check.
Final approach
Final hour starts around 19m
Traffic, exits, and arrival timing usually matter more near Bellview, NJ than in the middle of the route.
Before You Leave
+
Have your navigation ready before leaving Lumberton, NJ.
Day 1
Settle into the route from Lumberton, NJ
This is one driving day of about 14.6 miles and 23m.
At 14.6 miles this is a quick drive — no planned stops needed.
The longest stretch is on State Route 38 for about 4.5 miles.
Where to Stop
Rest stops, refuel points, and overnight suggestions along this route.
Halfway Point
Midpoint
About 7.3 mi from Lumberton, NJ · 10m into the drive
Pacing Suggestions
Fuel and coffee
A short stop after about 14.6 miles helps settle the day before fatigue starts building.
Meal break
The midpoint is around 7.3 miles from Lumberton, NJ, which is a good place for a longer meal and fuel stop.
Arriving in Bellview, NJ
Allow a few extra minutes for the final approach into Bellview, NJ if you are unfamiliar with the area.
These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.
Fuel & Cost
Regular Gas
$2.42 one way
$4.84 round trip
$4.21/gal
25.4 MPG avg
5 kg CO2
| Fuel Type | $/gal | One Way | Round Trip |
|---|---|---|---|
| midgrade | $4.61 | $2.65 | $5.30 |
| premium | $4.93 | $2.83 | $5.66 |
| diesel | $5.61 | $3.22 | $6.45 |
No toll roads detected on this route.
Estimated Trip Cost (one way, 1 person)
Fuel
$2
Meals
$25–$50
Total
$27–$52
Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.
Estimated CO2 emission: 5.1 kg one way. Prices: EIA weekly data, 2026-04-13.
Driving Electric?
About $2 in charging · 0 stops · 60% less CO2
| Vehicle Type | kWh | Stops | DC Fast | Home Charge |
|---|---|---|---|---|
| Average EV | 4.4 | 0 | $1.53 | $0.70 |
| Efficient EV | 3.7 | 0 | $1.28 | $0.58 |
| EV Truck/SUV | 5.8 | 0 | $2.04 | $0.93 |
Gas CO2
5 kg
EV CO2
2 kg (60% less)
This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.
DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.
Travel Intel
Current conditions at both ends of the drive.
Destination
Bellview, NJ
Night in Bellview on Wednesday
Local time
10:45 PM
EDT
Current temp
61°F
Unavailable
Live forecast
Time zone
Same local time
Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.
Temperature spread
15 degrees warmer at arrival
A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.
Road read
23m on the road
Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.
Weather data from the National Weather Service. Conditions may change; check closer to your travel date.
Frequently Asked Questions
The drive from Lumberton, NJ to Bellview, NJ covers 14.6 miles and takes about 23m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are State Route 38, Hartford Road, South Bridgeboro Street. Expect a mix of highway and local road driving.
This is a comfortable same-day trip.
The midpoint is about 7.3 miles from Lumberton, NJ. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $2.42 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
This is a straightforward 23m drive. You will face about 8 decision points, but nothing that requires special attention if you follow navigation.
The main spots that need attention: at 0.5 miles (CR 541 / Mount Holly Bypass): Navigation decision point; at 1.3 miles (NJ 38 / State Route 38): Lane positioning matters here; at 5.8 miles (CR 686 / Hartford Road): Navigation decision point.
The route from Lumberton, NJ to Bellview, NJ does not surface many named destination signs beyond the main corridor.
Was this route helpful?
Thanks for your feedback!
Your tip has been submitted. Thanks!
/500
Recent Tips
·
Explore More
Explore more options from Lumberton, NJ or browse trips ending in Bellview, NJ.
Looking for more statewide routes? Browse NJ road trips.
Explore maps for Lumberton, NJ or Bellview, NJ on MapSof.net.