Trip from Marysville, WA to Arlington, WA

Drive Time

19m

Distance

13.8 mi

22 km

Drive Score

6/10

Good drive

Same Day?

Yes, doable

Fuel Cost

$3

one way

EV Charging

Loading...

station data

Best Time to Leave

4 AM
0h 17m ★
6 AM
0h 19m
8 AM
0h 22m
10 AM
0h 20m
12 PM
0h 20m
3 PM
0h 20m
5 PM
0h 22m
8 PM
0h 18m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

Downtown Marysville, WA, WA

Marysville, WA

William Jacobs

Downtown Arlington, WA, WA

Arlington, WA

Dominik Gryzbon

Trip Overview

If you are planning to travel between Marysville and Arlington, you are looking at a quick 13.8-mile trip that typically takes about 19 minutes. This route is entirely contained within the Pacific Coast region of Washington, making it a straightforward connection rather than a long-haul journey. Because of its brevity, it is perfectly suited for a single-day trip, requiring no overnight stays. You can expect to spend roughly $3 on fuel for the excursion, keeping your travel costs quite low. This drive is a practical, efficient way to navigate between these two communities without any need for complex logistics.

Trip Pace

Same-day drive is realistic

A same-day return is realistic if you keep stops short.

Break Rhythm

0 planned breaks

A short stop every 2 to 3 hours is enough for this drive.

Midpoint

6.9 miles from Marysville, WA

A natural place for your longest stop of the day , about 9m into the drive .

Drive Character

This trip is heavily focused on highway transit, with 93% of the journey spent on major routes including I-5, State Highway 530 Northeast, and WA 530. You will spend the vast majority of your time on the interstate, including a longest uninterrupted stretch of 9 miles on I-5. The experience is best described as a highway-focused drive, moving quickly from the urbanized corridor onto the regional state highway system. Expect a consistent, fast-paced rhythm behind the wheel as you transition between these high-speed roads. It is a functional, no-nonsense commute that prioritizes speed and directness over winding scenic detours.

Most of the miles stay on highways, which makes pacing and fuel planning easier than turn-by-turn city driving.
There are about 14 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
I 5 is the longest continuous segment at about 9 miles.

How Hard Is This Drive?

This is a straightforward highway drive that stays mostly on I 5 and State Highway 530 Northeast. You will hit about 10 points where you need to pay attention to lane position or signs. The trickiest moment comes early in the drive near WA 528 / 4th Street.

Route Complexity 5/10

Moderate - straightforward overall, but long enough or busy enough to require pacing

This drive requires moderate attention. Across 13.8 miles you will encounter 10 spots where lane choice or exit timing matters. Not difficult for experienced highway drivers, but worth previewing the tricky sections before you go.

Where does it get tricky?

The main spots that need attention: near the start (WA 528 / 4th Street): Lane positioning matters here; at 0.3 miles: Complex interchange - multiple decisions in a short stretch; at 0.6 miles (I 5): Merge point - match speed before joining. Lane positioning matters here.

Critical Maneuvers

5 of 10 key points

These are the spots where you need to pay the most attention. Preview them before you drive.

6
0 mi into trip | ~0m in | WA 528 / 4th Street

Turn left onto WA 528 / 4th Street

Lane positioning matters here

Use the none lane.
6
0.3 mi into trip | ~0m in

Take the ramp toward I 5 North: Vancouver British Columbia

Complex interchange - multiple decisions in a short stretch

Toward I 5 North: Vancouver British Columbia
5
0.6 mi into trip | ~1m in | I 5

Merge onto I 5

Merge point - match speed before joining. Lane positioning matters here

Use the none lane.
8
9.7 mi into trip | ~12m in

Take the exit toward WA 530 East: Arlington, Darrington

Exit ramp - move to the correct lane early. Lane positioning matters here. Multiple destination signs - pick the right one

Use the straight / slight right lanes. Exit 208 Toward WA 530 East: Arlington, Darrington
5
12.5 mi into trip | ~16m in | WA 530

Enter roundabout onto WA 530

Roundabout - know your exit number before entering

Towns Along This Route

On the drive from Marysville, WA to Arlington, WA, road signs begin pointing toward Darrington along the way.

Darrington

9.7 mi in | ~12m

Main Roads

Road Distance Duration
I 5 9 mi 10m
State Highway 530 Northeast 2.3 mi 3m
WA 530 1.5 mi 2m
4th Street 0.3 mi <1m
West Division Street 0.1 mi <1m
State Avenue <0.1 mi <1m
Longest stretch: I 5 — 9 mi, about 10m

Turn-by-Turn Driving Directions

Step-by-step road directions between Marysville, WA and Arlington, WA.

1

Start on WA 529

24 ft · 6 sec · State Avenue
2

Turn left onto WA 528

0.3 mi · 38 sec · 4th Street
Use the none lane.
3

Take the ramp

0.3 mi · 40 sec
Toward I 5 North: Vancouver British Columbia
4

Merge onto I 5

9.0 mi · 10 min · I 5
Use the none lane.
5

Take the exit

0.2 mi · 26 sec
Exit 208 Toward WA 530 East: Arlington, Darrington Use the straight / slight right lanes.
6

Turn right onto WA 530

2.3 mi · 3 min · State Highway 530 Northeast
7

Enter roundabout onto WA 530

51 ft · 0 sec · WA 530
8

Continue on WA 530

0.3 mi · 26 sec · WA 530
9

Enter roundabout onto WA 530

89 ft · 1 sec · WA 530
10

Continue on WA 530

1.1 mi · 1 min · WA 530
11

Enter roundabout onto West Division Street

96 ft · 2 sec · West Division Street
12

Continue on West Division Street

0.1 mi · 18 sec · West Division Street
13

Enter roundabout

124 ft · 3 sec
14

Arrive at destination

Trip Plan

Since this is a short 19-minute drive, you have plenty of flexibility regarding your departure time, though avoiding peak traffic hours is always a smart move. You will not need to plan for any formal stops along the way, as the route is short enough to drive in one go. Keep your fuel tank topped off before you head out, as the $3 budget assumes a quick, direct trip without idling in traffic. Because the majority of your time is spent on I-5, stay alert for merging vehicles as you transition onto WA 530. Use the brevity of the trip to your advantage by planning your arrival in Arlington with precision rather than worrying about mid-drive rest breaks.

Morning Departure

Leave by 9 AM and you'll arrive before lunch.

Evening Departure

Even a 4 PM departure gets you there before dark in summer.

You can normally do this drive in one day.
You may only need one short stretch break if traffic stays light.
The halfway point lands around 6.9 miles from Marysville, WA, or about 9m into the drive.
The longest continuous stretch on this route runs about 9 miles.

This is a comfortable same-day trip.

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 13.8 miles or 19m in

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 6.9 miles or 9m in

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Final hour starts around 15m

Traffic, exits, and arrival timing usually matter more near Arlington, WA than in the middle of the route.

Before You Leave

+

Open the route before leaving Marysville, WA so your first major turns are already loaded.

+

Leave with enough water and a charging cable within reach, not packed away.

+

Check your fuel range against the first long segment, especially if you are starting outside city service areas.

Day 1

Settle into the route from Marysville, WA

This is one driving day of about 13.8 miles and 19m.

Your first comfortable stop window is around 80 miles from Marysville, WA.
This route can stay practical as a one-day drive if traffic stays reasonable.
You may only need one short stretch stop if conditions stay smooth.
The longest stretch is on I 5 for about 9 miles.

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 6.9 mi from Marysville, WA · 9m into the drive

Mid-route town

Meal stop

Everett, WA

7 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Pacing Suggestions

Everett, WA

Fuel and coffee

A short stop after about 13.8 miles helps settle the day before fatigue starts building.

Everett, WA

Meal break

The midpoint is around 6.9 miles from Marysville, WA, which is a good place for a longer meal and fuel stop.

Arriving in Arlington, WA

The final approach into Arlington, WA usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Arlington, WA.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Regular Gas

$2.90 one way

$5.79 round trip

$5.33/gal 25.4 MPG avg 5 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $5.57 $3.02 $6.05
premium $5.77 $3.14 $6.27
diesel $5.64 $3.07 $6.13

No toll roads detected on this route.

Estimated Trip Cost (one way, 1 person)

Fuel

$3

Meals

$25–$50

Total

$28–$53

Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.

Estimated CO2 emission: 4.8 kg one way. Prices: EIA weekly data, 2026-04-06.

Driving Electric?

About $1 in charging · 0 stops · 60% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 4.1 0 $1.45 $0.66
Efficient EV 3.5 0 $1.21 $0.55
EV Truck/SUV 5.5 0 $1.93 $0.88

Gas CO2

5 kg

EV CO2

2 kg (60% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast data refreshed 3 days ago

Origin

Marysville, WA

Night in Marysville on Sunday

Local time

9:05 PM

PDT

Current temp

40°F

Unavailable

Live forecast

Destination

Arlington, WA

Night in Arlington on Sunday

Local time

9:05 PM

PDT

Current temp

53°F

Unavailable

Live forecast

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.

Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.

Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

13 degrees warmer at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

19m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Marysville, WA to Arlington, WA covers 13.8 miles and takes about 19m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are I 5, State Highway 530 Northeast, WA 530. Most of the drive stays on highways, so watch for ramps and exits.
This is a comfortable same-day trip.
The midpoint is about 6.9 miles from Marysville, WA. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $2.90 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
This drive requires moderate attention. Across 13.8 miles you will encounter 10 spots where lane choice or exit timing matters. Not difficult for experienced highway drivers, but worth previewing the tricky sections before you go.
The main spots that need attention: near the start (WA 528 / 4th Street): Lane positioning matters here; at 0.3 miles: Complex interchange - multiple decisions in a short stretch; at 0.6 miles (I 5): Merge point - match speed before joining. Lane positioning matters here.
On the drive from Marysville, WA to Arlington, WA, road signs begin pointing toward Darrington along the way.

Was this route helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Explore more options from Marysville, WA or browse trips ending in Arlington, WA.

Looking for more statewide routes? Browse WA road trips.

Explore maps for Marysville, WA or Arlington, WA on MapSof.net.