Trip from Marysville, WA to Seattle, WA

Drive Time

44m

Distance

33.8 mi

54 km

Drive Score

6/10

Good drive

Same Day?

Yes, doable

Fuel Cost

$7

one way

EV Charging

Loading...

station data

Best Time to Leave

Save up to 11 min
4 AM
0h 41m ★
6 AM
0h 45m
8 AM
0h 52m
10 AM
0h 47m
12 PM
0h 46m
3 PM
0h 48m
5 PM
0h 52m
8 PM
0h 42m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

Downtown Marysville, WA, WA

Marysville, WA

William Jacobs

Downtown Seattle, WA, WA

Seattle, WA

Josh Hild

Trip Overview

If you are looking for a quick commute or a simple day trip within the Pacific Coast region, the 33.8-mile journey from Marysville to Seattle is an straightforward option. Expect to spend about 44 minutes behind the wheel, making it a highly efficient connection between these two Washington hubs. Since the trip is short enough to complete in a single day, you do not need to worry about overnight logistics. You should budget approximately $7 for fuel to cover the distance. This drive is best viewed as a practical link rather than a scenic getaway, offering a direct path for those traveling between the two cities.

Trip Pace

Same-day drive is realistic

A same-day return is realistic if you keep stops short.

Break Rhythm

0 planned breaks

A short stop every 2 to 3 hours is enough for this drive.

Midpoint

16.9 miles from Marysville, WA

A natural place for your longest stop of the day , about 21m into the drive .

Drive Character

This route is heavily highway-focused, with 96% of the journey taking place on major thoroughfares. You will spend the vast majority of your time on I-5, which accounts for a 32.3-mile stretch of the trip. While you start by navigating local streets like State Avenue and 5th Avenue, the experience quickly transitions into a sustained interstate drive. Because the highway percentage is so high, the road remains consistent and predictable throughout the duration. Expect a steady, utilitarian drive that prioritizes speed and efficiency over winding backroads.

Most of the miles stay on highways, which makes pacing and fuel planning easier than turn-by-turn city driving.
There are about 11 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
I 5 is the longest continuous segment at about 32.3 miles.

How Hard Is This Drive?

This is a straightforward highway drive that stays mostly on I 5 and State Avenue. There are only a few real navigation decisions along the way. The trickiest moment comes around 0.9 miles in near I 5.

Route Complexity 4/10

Easy - simple navigation with a manageable amount of wheel time

This is a straightforward 44m drive. You will face about 8 decision points, but nothing that requires special attention if you follow navigation.

Where does it get tricky?

The main spots that need attention: at 0.9 miles (I 5): Merge point - match speed before joining. Lane positioning matters here; at 33.2 miles: Exit ramp - move to the correct lane early. Lane positioning matters here; at 33.5 miles (5th Avenue): Lane positioning matters here.

Critical Maneuvers

5 of 8 key points

These are the spots where you need to pay the most attention. Preview them before you drive.

5
0.9 mi into trip | ~1m in | I 5

Merge onto I 5

Merge point - match speed before joining. Lane positioning matters here

Use the none lane.
7
33.2 mi into trip | ~42m in

Take the exit toward Union Street

Exit ramp - move to the correct lane early. Lane positioning matters here

Use the slight right lane. Exit 165B Toward Union Street
7
33.5 mi into trip | ~43m in | 5th Avenue

Turn left onto 5th Avenue

Lane positioning matters here

Use the left lane.
5
33.8 mi into trip | ~44m in | Madison Street

Turn right onto Madison Street

Navigation decision point

5
33.8 mi into trip | ~44m in

Turn left

Navigation decision point

Main Roads

Road Distance Duration
I 5 32.3 mi 40m
State Avenue 0.5 mi 1m
5th Avenue 0.3 mi <1m
Union Street 0.2 mi <1m
State Route 529 <0.1 mi <1m
Madison Street <0.1 mi <1m
Longest stretch: I 5 — 32.3 mi, about 40m

Turn-by-Turn Driving Directions

Step-by-step road directions between Marysville, WA and Seattle, WA.

1

Start on WA 529

0.5 mi · 1 min · State Avenue
2

Enter roundabout onto State Route 529

70 ft · 1 sec · State Route 529
3

Continue on State Route 529

100 ft · 1 sec · State Route 529
4

Take the ramp

0.3 mi · 37 sec
Toward I 5
5

Merge onto I 5

32 mi · 40 min · I 5
Use the none lane.
6

Take the exit

0.2 mi · 25 sec
Exit 165B Toward Union Street Use the slight right lane.
7

Continue on Union Street

0.2 mi · 41 sec · Union Street
Use the straight / left / right lanes.
8

Turn left onto 5th Avenue

0.3 mi · 55 sec · 5th Avenue
Use the left lane.
9

Turn right onto Madison Street

113 ft · 9 sec · Madison Street
10

Turn left

31 ft · 2 sec
11

Arrive at destination

Trip Plan

To make the most of this 44-minute drive, consider timing your departure to avoid peak traffic hours on I-5. Since there are zero planned stops along the way, ensure your vehicle is fueled up before you leave to keep your $7 expense on track. The short duration provides plenty of flexibility, so you can easily adapt your schedule to fit your personal agenda. Because the route is dominated by a long interstate stretch, keep a close eye on navigation alerts for any potential congestion. Taking advantage of the direct highway access is the smartest way to ensure you reach Seattle without unnecessary delays.

Morning Departure

Leave by 9 AM and you'll arrive before lunch.

Evening Departure

Even a 4 PM departure gets you there before dark in summer.

You can normally do this drive in one day.
You may only need one short stretch break if traffic stays light.
The halfway point lands around 16.9 miles from Marysville, WA, or about 21m into the drive.
The longest continuous stretch on this route runs about 32.3 miles.

This is a comfortable same-day trip.

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 33.8 miles or 44m in

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 16.9 miles or 21m in

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Final hour starts around 36m

Traffic, exits, and arrival timing usually matter more near Seattle, WA than in the middle of the route.

Before You Leave

+

Open the route before leaving Marysville, WA so your first major turns are already loaded.

+

Leave with enough water and a charging cable within reach, not packed away.

+

Check your fuel range against the first long segment, especially if you are starting outside city service areas.

Day 1

Settle into the route from Marysville, WA

This is one driving day of about 33.8 miles and 44m.

Your first comfortable stop window is around 80 miles from Marysville, WA.
This route can stay practical as a one-day drive if traffic stays reasonable.
You may only need one short stretch stop if conditions stay smooth.
The longest stretch is on I 5 for about 32.3 miles.

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 16.9 mi from Marysville, WA · 21m into the drive

Downtown Kenmore, WA, WA

Mid-route town

Meal stop

Kenmore, WA

17 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Pacing Suggestions

Bellevue, WA

Fuel and coffee

A short stop after about 33.8 miles helps settle the day before fatigue starts building.

Kenmore, WA

Meal break

The midpoint is around 16.9 miles from Marysville, WA, which is a good place for a longer meal and fuel stop.

Arriving in Seattle, WA

The final approach into Seattle, WA usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Seattle, WA.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Regular Gas

$7.09 one way

$14.19 round trip

$5.33/gal 25.4 MPG avg 12 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $5.57 $7.41 $14.82
premium $5.77 $7.68 $15.36
diesel $5.64 $7.51 $15.02

No toll roads detected on this route.

Estimated Trip Cost (one way, 1 person)

Fuel

$7

Meals

$25–$50

Total

$32–$57

Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.

Estimated CO2 emission: 11.8 kg one way. Prices: EIA weekly data, 2026-04-06.

Driving Electric?

About $4 in charging · 0 stops · 67% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 10.1 0 $3.55 $1.62
Efficient EV 8.5 0 $2.96 $1.35
EV Truck/SUV 13.5 0 $4.73 $2.16

Gas CO2

12 kg

EV CO2

4 kg (67% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast data refreshed 3 days ago

Origin

Marysville, WA

Night in Marysville on Sunday

Local time

9:11 PM

PDT

Current temp

40°F

Unavailable

Live forecast

Destination

Seattle, WA

Night in Seattle on Sunday

Local time

9:11 PM

PDT

Current temp

41°F

Unavailable

Live forecast

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.

Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.

Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

1 degrees warmer at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

44m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Marysville, WA to Seattle, WA covers 33.8 miles and takes about 44m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are I 5, State Avenue, 5th Avenue. Most of the drive stays on highways, so watch for ramps and exits.
This is a comfortable same-day trip.
The midpoint is about 16.9 miles from Marysville, WA. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $7.09 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
This is a straightforward 44m drive. You will face about 8 decision points, but nothing that requires special attention if you follow navigation.
The main spots that need attention: at 0.9 miles (I 5): Merge point - match speed before joining. Lane positioning matters here; at 33.2 miles: Exit ramp - move to the correct lane early. Lane positioning matters here; at 33.5 miles (5th Avenue): Lane positioning matters here.
The route from Marysville, WA to Seattle, WA does not surface many named destination signs beyond the main corridor.

Was this route helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Return Trip

Seattle, WA to Marysville, WA

Plan the drive back the other way.

34.1 mi 44m

Explore more options from Marysville, WA or browse trips ending in Seattle, WA.

Looking for more statewide routes? Browse WA road trips.

Explore maps for Marysville, WA or Seattle, WA on MapSof.net.