Origin
Milford, OH
Evening in Milford on Sunday
Local time
8:14 PM
EDT
Current temp
52°F
Unavailable
Sign in
No account yet?
Create accountDrive Time
4h 16m
Distance
273.2 mi
440 km
Drive Score
8/10
Great drive
Same Day?
Yes, doable
Fuel Cost
$41
one way
EV Charging
Loading...
station data
Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.
Connecting Milford to Youngstown, this 273.2-mile journey through the Midwest typically takes about 4 hours and 16 minutes behind the wheel. Given the duration, this route is perfectly manageable as a single-day trip, allowing you to reach your destination without the need for an overnight stay. You should budget approximately $40 for fuel to cover the distance. Navigating out of Milford involves local roads like Main Street before transitioning onto I-275 North and the Circle Freeway. Because the trip is straightforward, it serves as a reliable transit route within Ohio, offering a practical way to cross the region in one sitting.
Trip Pace
Same-day drive is realistic
A same-day return is possible, but it will make for a full day on the road.
Break Rhythm
1 planned break
Plan on a short reset every 3 to 4 hours to stay fresh behind the wheel.
Midpoint
136.6 miles from Milford, OH
A natural place for your longest stop of the day , about 2h 8m into the drive .
Expect a turn-heavy local drive that demands your full attention rather than a mindless highway cruise. Unlike long-distance interstate hauls, this route features a 0% highway share, placing you squarely on local roads for the duration of the trip. The longest stretch you will encounter is 0 miles on Main Street, meaning you will be navigating constant shifts in direction and road type. This profile creates a more technical driving experience where you stay engaged with the road layout. As you move away from the starting point, the focus shifts from local surface streets to the transitions onto the Circle Freeway.
Expect a hands-on drive with frequent turns and local roads rather than long highway stretches. There are only a few real navigation decisions along the way.
Easy - simple navigation with a manageable amount of wheel time
This is a straightforward 4h 16m drive. You will face about 0 decision points, but nothing that requires special attention if you follow navigation.
Where does it get tricky?
This route does not have any notably tricky sections. Most of the drive from Milford, OH to Youngstown, OH is straightforward, with well-signed roads and simple exits.
| Road | Distance | Duration |
|---|---|---|
| Main Street | Unavailable | Refreshing |
| I 275 North | Unavailable | Refreshing |
| Circle Freeway | Unavailable | Refreshing |
| I 71 North | Unavailable | Refreshing |
| Northeast Expressway | Unavailable | Refreshing |
| SR 123 | Unavailable | Refreshing |
| Middleboro Road | Unavailable | Refreshing |
| Wilmington Road | Unavailable | Refreshing |
Per-road distance and duration are being refreshed from OSRM for this route.
Step-by-step road directions between Milford, OH and Youngstown, OH.
Start on Sycamore Street
Turn right onto Main Street
Continue straight
Take the ramp slight right toward I 275 North
Merge slight left onto Circle Freeway
Take the exit slight right toward I 71 North: Columbus
Merge slight left onto Northeast Expressway
Take the exit slight right toward SR 123: Morrow, Lebanon
Turn right
Turn left
Turn left onto Middleboro Road
At the end of the road, turn left onto Wilmington Road
Take the ramp right toward I 71 North: Columbus
Merge slight left
Take the exit slight right toward I 71 North, I 70 East: Cleveland, Wheeling
Merge slight left onto South Innerbelt
Keep slight right to continue on I 71 North: Cleveland
Keep slight left
Take the exit slight right toward I 76, US 224: Lodi, Akron
Keep slight right to continue on I 76, US 224 East: Akron
Merge slight left
Keep slight right to continue on Kenmore Expressway
Keep slight right to continue on I 76 East: Akron
Keep slight left
Continue straight
Keep slight right to continue on I 680: Youngstown
Take the exit slight right
Turn sharp left onto Market Street
Keep slight right to continue on Central Square
Arrive at your destination
Since this is a turn-heavy route, planning for at least one dedicated stop will help you stay sharp and manage the local navigation. Aim to depart early in the morning to avoid local traffic congestion that can slow down your progress on surface streets. Keep an eye on your fuel gauge, as the $40 cost estimate assumes consistent travel, and local road conditions can sometimes lead to more idling than interstate driving. Because you are navigating local roads, prioritize using a reliable GPS to handle the frequent turns throughout the 273.2-mile journey. Flexibility is your best asset here, so don't hesitate to take a break whenever the local road transitions become repetitive.
Morning Departure
An early start around 7-8 AM gets you there with plenty of daylight left.
Evening Departure
A late afternoon start means arriving after dark. Morning is better.
This is a comfortable same-day trip.
Departure
Before you leave
Start with fuel, water, and navigation already sorted so the first hour feels easy.
First stop
Around 80 miles or 1h 15m in
Use this first pause for coffee, a restroom break, and a quick traffic check ahead.
Halfway reset
Around 136.6 miles or 2h 8m in
This is the best place for your longest stop, a real meal, and a full fuel check.
Final approach
Final hour starts around 3h 30m
Traffic, exits, and arrival timing usually matter more near Youngstown, OH than in the middle of the route.
Open the route before leaving Milford, OH so your first major turns are already loaded.
Leave with enough water and a charging cable within reach, not packed away.
Check your fuel range against the first long segment, especially if you are starting outside city service areas.
Day 1
Settle into the route from Milford, OH
This is one driving day of about 273.2 miles and 4h 16m.
Rest stops, refuel points, and overnight suggestions along this route.
Halfway Point
Midpoint
About 136.6 mi from Milford, OH · 2h 8m into the drive
Mid-route town
Meal stop
137 mi into the route
Best for: Lunch, fuel, and a longer reset
This sits close to the middle of the route, so it works well for the longest stop of the day.
A short stop after about 80 miles helps settle the day before fatigue starts building.
The midpoint is around 136.6 miles from Milford, OH, which is a good place for a longer meal and fuel stop.
The final approach into Youngstown, OH usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.
Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Youngstown, OH.
These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.
Regular Gas
$40.86 one way
$81.72 round trip
| Fuel Type | $/gal | One Way | Round Trip |
|---|---|---|---|
| midgrade | $4.24 | $45.63 | $91.25 |
| premium | $4.79 | $51.52 | $103.04 |
| diesel | $5.64 | $60.70 | $121.39 |
No toll roads detected on this route.
Estimated Trip Cost (one way, 1 person)
Fuel
$41
Meals
$25–$50
Total
$66–$91
Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.
Estimated CO2 emission: 95.6 kg one way. Prices: EIA weekly data, 2026-04-06.
Driving Electric?
About $29 in charging · 1 stop · 67% less CO2
| Vehicle Type | kWh | Stops | DC Fast | Home Charge |
|---|---|---|---|---|
| Average EV | 82 | 1 | $28.69 | $13.11 |
| Efficient EV | 68.3 | 0 | $23.90 | $10.93 |
| EV Truck/SUV | 109.3 | 1 | $38.25 | $17.48 |
Gas CO2
96 kg
EV CO2
32 kg (67% less)
Plan for 1 charging stop. A 30-minute DC fast charge mid-route should be enough to complete the trip comfortably.
DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.
Current conditions at both ends of the drive.
Origin
Evening in Milford on Sunday
Local time
8:14 PM
EDT
Current temp
52°F
Unavailable
Destination
Evening in Youngstown on Sunday
Local time
8:14 PM
EDT
Current temp
55°F
Unavailable
Along the Route
54°F
Mansfield, OH
137 mi in
Seasonal Notes
Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.
Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.
Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.
Time zone
Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.
Temperature spread
A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.
Road read
An early start around 7-8 AM gets you there with plenty of daylight left.
Weather data from the National Weather Service. Conditions may change; check closer to your travel date.
Thanks for your feedback!
Your tip has been submitted. Thanks!
/500
Recent Tips
·
Explore more options from Milford, OH or browse trips ending in Youngstown, OH.
Looking for more statewide routes? Browse OH road trips.
Explore maps for Milford, OH or Youngstown, OH on MapSof.net.