Skip to main content

Trip from Mitchell, SD to Beresford, SD

Last recalculated Apr 16, 2026

Drive Time

1h 45m

Distance

104.3 mi

168 km

Drive Score

8/10

Great drive

Same Day?

Yes, doable

Fuel Cost

$16

one way

EV Charging

Unknown

Best Time to Leave

Save up to 23 min
4 AM
1h 38m ★
6 AM
1h 46m
8 AM
2h 1m
10 AM
1h 51m
12 PM
1h 49m
3 PM
1h 52m
5 PM
2h 0m
8 PM
1h 41m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

Downtown Mitchell, SD, SD

Mitchell, SD

Wikimedia Commons

Trip Overview

The drive from Mitchell, SD to Beresford, SD covers 104.3 miles and takes about 1h 45m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.

The route leans on South Sanborn Boulevard, West Havens Avenue, South Burr Street for much of the mileage, and the overall profile is turn-heavy local drive. At current regular gas prices, budget about $16.31 one way before food or hotel costs.

Trip Pace

Same-day drive is realistic

A same-day return is realistic if you keep stops short.

Midpoint

52.1 miles from Mitchell, SD

A natural place for your longest stop of the day , about 52m into the drive .

Who Is This Route For?

Weekend Trip

Doable as a same-day drive at 1h 45m. Total distance: 104.3 miles.

Family Friendly

Moderate complexity with 0 natural rest stops along the way.

Solo Traveler

1h 45m drive, comfortable solo distance.

First-Time Driver

Mostly highway driving (0%). Straightforward navigation.

Scenic Drive

Turn-heavy local drive route profile.

Drive Character

Expect a 1h 45m drive with frequent turns across 104.3 miles of local and secondary roads.

This route has more turning and local-road decision points than a simple highway run.
There are about 12 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
South Sanborn Boulevard is one of the defining roads on this drive.

How Hard Is This Drive?

Expect a hands-on drive with frequent turns and local roads rather than long highway stretches. Navigation is very simple - set it and forget it for most of the drive.

Driving Effort 1/10

Very easy - short and simple to drive

Balances navigation complexity with total wheel time.

The drive from Mitchell, SD to Beresford, SD is easy. At 1h 45m with 0% highway, most drivers will find it relaxed and low-stress.

Where does it get tricky?

This route does not have any notably tricky sections. Most of the drive from Mitchell, SD to Beresford, SD is straightforward, with well-signed roads and simple exits.

Main Roads

Road Distance Duration
South Sanborn Boulevard
West Havens Avenue
South Burr Street
West Cedar Street
North 3rd Street
East Main Street

Some road-level metrics are being recalculated.

Longest stretch: South Sanborn Boulevard — detailed segment metrics are refreshing.

Turn-by-Turn Driving Directions

Step-by-step road directions between Mitchell, SD and Beresford, SD.

1

Start on West 1st Avenue

33 ft · 5 sec · West 1st Avenue
2

Turn right onto South Sanborn Boulevard

0.5 mi · 1 min · South Sanborn Boulevard
3

Turn left onto West Havens Avenue

0.6 mi · 1 min · West Havens Avenue
4

Turn right onto South Burr Street

0.8 mi · 1 min · South Burr Street
5

Take the ramp slight left

64 mi · 1 hr
6

Take the exit slight right

0.4 mi · 57 sec
7

Merge slight left

36 mi · 36 min
8

Take the exit slight right

0.3 mi · 47 sec
9

Turn left onto West Cedar Street

1.2 mi · 1 min · West Cedar Street
10

Turn right onto North 3rd Street

0.2 mi · 37 sec · North 3rd Street
11

Turn left onto East Main Street

115 ft · 5 sec · East Main Street
12

Arrive at your destination

Trip Plan

Morning Departure

Leave by 9 AM and you'll arrive before lunch.

Evening Departure

Even a 4 PM departure gets you there before dark in summer.

You can normally do this drive in one day.
You may only need one short stretch break if traffic stays light.
The halfway point lands around 52.1 miles from Mitchell, SD, or about 52m into the drive.

This is a comfortable same-day trip.

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 23 miles or 23m in

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 52.1 miles or 52m in

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Final hour starts around 1h 26m

Traffic, exits, and arrival timing usually matter more near Beresford, SD than in the middle of the route.

Before You Leave

+

Open the route before leaving Mitchell, SD so your first major turns are already loaded.

Day 1

Settle into the route from Mitchell, SD

This is one driving day of about 104.3 miles and 1h 45m.

Your first comfortable stop window is around 23 miles from Mitchell, SD.
This route can stay practical as a one-day drive if traffic stays reasonable.

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 52.1 mi from Mitchell, SD · 52m into the drive

city in and seat of Minnehaha County, and largest city in South Dakota, United States

Mid-route town

Meal stop

Sioux Falls, SD

52 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Popular next leg

Sioux Falls, SD to Beresford, SD

37.1 mi · 41m

Pacing Suggestions

Marion, SD

Fuel and coffee

A short stop after about 23 miles helps settle the day before fatigue starts building.

Sioux Falls, SD

Meal break

The midpoint is around 52.1 miles from Mitchell, SD, which is a good place for a longer meal and fuel stop.

Arriving in Beresford, SD

The final approach into Beresford, SD usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Regular Gas

$16.31 one way

$32.61 round trip

$3.97/gal 25.4 MPG avg 37 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.36 $17.90 $35.81
premium $4.89 $20.07 $40.14
diesel $5.61 $23.03 $46.06

No toll roads detected on this route.

Estimated Trip Cost (one way, 1 person)

Fuel

$16

Meals

$25–$50

Total

$41–$66

Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.

Estimated CO2 emission: 36.5 kg one way. Prices: EIA weekly data, 2026-04-13.

Driving Electric?

About $11 in charging · 0 stops · 67% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 31.3 0 $10.95 $5.01
Efficient EV 26.1 0 $9.13 $4.17
EV Truck/SUV 41.7 0 $14.60 $6.68

Gas CO2

36 kg

EV CO2

12 kg (67% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast as of Apr 15, 2026

Origin

Mitchell, SD

Afternoon in Mitchell on Thursday

Local time

4:14 PM

CDT

Current temp

77°F

Unavailable

Live forecast

Destination

Beresford, SD

Afternoon in Beresford on Thursday

Local time

4:14 PM

CDT

Current temp

76°F

Unavailable

Live forecast

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.

Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.

Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

1 degrees cooler at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

1h 45m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Mitchell, SD to Beresford, SD covers 104.3 miles and takes about 1h 45m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are South Sanborn Boulevard, West Havens Avenue, South Burr Street. Expect a mix of highway and local road driving.
This is a comfortable same-day trip.
The midpoint is about 52.1 miles from Mitchell, SD. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $16.31 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
The drive from Mitchell, SD to Beresford, SD is easy. At 1h 45m with 0% highway, most drivers will find it relaxed and low-stress.
This route does not have any notably tricky sections. Most of the drive from Mitchell, SD to Beresford, SD is straightforward, with well-signed roads and simple exits.
The route from Mitchell, SD to Beresford, SD does not surface many named destination signs beyond the main corridor.

Was this helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

More trips to Beresford, SD

Explore more options from Mitchell, SD or browse trips ending in Beresford, SD.

Looking for more statewide routes? Browse SD road trips.

Explore maps for Mitchell, SD or Beresford, SD on MapSof.net.