Skip to main content

Trip from Murrysville, PA to Mount Lebanon, PA

Last recalculated Apr 16, 2026

Drive Time

42m

Distance

24.7 mi

40 km

Drive Score

6/10

Good drive

Same Day?

Yes, doable

Fuel Cost

$4

one way

EV Charging

Unknown

Best Time to Leave

Save up to 11 min
4 AM
0h 38m ★
6 AM
0h 42m
8 AM
0h 49m
10 AM
0h 44m
12 PM
0h 44m
3 PM
0h 45m
5 PM
0h 49m
8 PM
0h 40m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

Downtown Murrysville, PA, PA

Murrysville, PA

Jack Pace

municipality in Allegheny County, Pennsylvania, United States

Mount Lebanon, PA

Wikimedia Commons

Trip Overview

The drive from Murrysville, PA to Mount Lebanon, PA covers 24.7 miles and takes about 42m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.

The route leans on Vincent Hall Road, William Penn Highway, Penn-Lincoln Parkway East for much of the mileage, and the overall profile is turn-heavy local drive. At current regular gas prices, budget about $4.09 one way before food or hotel costs.

Who Is This Route For?

Weekend Trip

Doable as a same-day drive at 42m. Total distance: 24.7 miles.

Family Friendly

Moderate complexity with 0 natural rest stops along the way.

Solo Traveler

42m drive, comfortable solo distance.

EV Driver

0 DC fast chargers along the route. Coverage: unknown.

First-Time Driver

Mostly highway driving (0%). Straightforward navigation.

Scenic Drive

Turn-heavy local drive route profile.

Drive Character

Expect a 42m drive with frequent turns across 24.7 miles of local and secondary roads.

This route has more turning and local-road decision points than a simple highway run.
There are about 19 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
Vincent Hall Road is one of the defining roads on this drive.

How Hard Is This Drive?

Expect a hands-on drive with frequent turns and local roads rather than long highway stretches. Navigation is very simple - set it and forget it for most of the drive.

Driving Effort 1/10

Very easy - short and simple to drive

Balances navigation complexity with total wheel time.

The drive from Murrysville, PA to Mount Lebanon, PA is easy. At 42m with 0% highway, most drivers will find it relaxed and low-stress.

Where does it get tricky?

This route does not have any notably tricky sections. Most of the drive from Murrysville, PA to Mount Lebanon, PA is straightforward, with well-signed roads and simple exits.

Main Roads

Road Distance Duration
Vincent Hall Road
William Penn Highway
Penn-Lincoln Parkway East
PA 885 South
Bates Street
Second Avenue
Hot Metal Street
East Carson Street

Some road-level metrics are being recalculated.

Longest stretch: Vincent Hall Road — detailed segment metrics are refreshing.

Turn-by-Turn Driving Directions

Step-by-step road directions between Murrysville, PA and Mount Lebanon, PA.

1

Start on Old William Penn Highway

69 ft · 9 sec · Old William Penn Highway
2

Turn left onto Vincent Hall Road

413 ft · 10 sec · Vincent Hall Road
3

Turn right onto William Penn Highway

3.3 mi · 5 min · William Penn Highway
4

Keep slight right to continue on Penn-Lincoln Parkway East

12 mi · 16 min · Penn-Lincoln Parkway East
5

Take the exit right toward PA 885 South: Glenwood

479 ft · 24 sec · PA 885 South: Glenwood
6

Turn right onto Bates Street

0.1 mi · 14 sec · Bates Street
7

Turn left onto Second Avenue

0.1 mi · 19 sec · Second Avenue
8

Turn right onto Hot Metal Street

0.5 mi · 1 min · Hot Metal Street
9

At the end of the road, turn left onto East Carson Street

1.2 mi · 2 min · East Carson Street
10

Turn right onto Becks Run Road

2.5 mi · 3 min · Becks Run Road
11

Continue on Biscayne Drive

0.2 mi · 21 sec · Biscayne Drive
12

At the end of the road, turn right onto Maytide Street

0.6 mi · 55 sec · Maytide Street
13

Turn left onto Saw Mill Run Boulevard

0.2 mi · 28 sec · Saw Mill Run Boulevard
14

Take the exit slight right

2.8 mi · 5 min
15

Turn right onto Connor Road

1.2 mi · 2 min · Connor Road
16

Turn right onto Washington Road

390 ft · 16 sec · Washington Road
17

Turn right

157 ft · 14 sec
18

Turn right

236 ft · 17 sec
19

Arrive at your destination

Fuel & Cost

Regular Gas

$4.09 one way

$8.19 round trip

$4.21/gal 25.4 MPG avg 9 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.61 $4.48 $8.97
premium $4.93 $4.79 $9.58
diesel $5.61 $5.45 $10.91

No toll roads detected on this route.

Drive Cost (one way)

Fuel

$4

Estimated CO2 emission: 8.6 kg one way. Prices: EIA weekly data, 2026-04-13.

Driving Electric?

About $3 in charging · 0 stops · 67% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 7.4 0 $2.59 $1.19
Efficient EV 6.2 0 $2.16 $0.99
EV Truck/SUV 9.9 0 $3.46 $1.58

Gas CO2

9 kg

EV CO2

3 kg (67% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast as of Apr 15, 2026

Origin

Murrysville, PA

Morning in Murrysville on Thursday

Local time

11:48 AM

EDT

Current temp

48°F

Unavailable

Live forecast

Destination

Mount Lebanon, PA

Morning in Mount Lebanon on Thursday

Local time

11:48 AM

EDT

Current temp

49°F

Unavailable

Live forecast

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

1 degrees warmer at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

42m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Murrysville, PA to Mount Lebanon, PA covers 24.7 miles and takes about 42m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are Vincent Hall Road, William Penn Highway, Penn-Lincoln Parkway East. Expect a mix of highway and local road driving.
This is a comfortable same-day trip.
The midpoint is about 12.4 miles from Murrysville, PA. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $4.09 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
The drive from Murrysville, PA to Mount Lebanon, PA is easy. At 42m with 0% highway, most drivers will find it relaxed and low-stress.
This route does not have any notably tricky sections. Most of the drive from Murrysville, PA to Mount Lebanon, PA is straightforward, with well-signed roads and simple exits.
The route from Murrysville, PA to Mount Lebanon, PA does not surface many named destination signs beyond the main corridor.

Was this helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Explore more options from Murrysville, PA or browse trips ending in Mount Lebanon, PA.

Looking for more statewide routes? Browse PA road trips.

Explore maps for Murrysville, PA or Mount Lebanon, PA on MapSof.net.