Trip from North Bel Air, MD to Bennsville, MD

Drive Time

2h 4m

Distance

86.3 mi

139 km

Drive Score

9/10

Great drive

Same Day?

Yes, doable

Fuel Cost

$14

one way

Trip Overview

The drive from North Bel Air, MD to Bennsville, MD covers 86.3 miles and takes about 2h 4m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.

The route leans on Crain Highway, MD 3, I 97 for much of the mileage, and the overall profile is mixed drive. The longest uninterrupted segment is about 21.1 miles on Crain Highway. At current regular gas prices, budget about $14.28 one way before food or hotel costs.

Trip Pace

Same-day drive is realistic

A same-day return is realistic if you keep stops short.

Break Rhythm

0 planned breaks

A short stop every 2 to 3 hours is enough for this drive.

Midpoint

43.2 miles from North Bel Air, MD

A natural place for your longest stop of the day , about 57m into the drive .

Drive Character

The drive from North Bel Air, MD to Bennsville, MD covers 86.3 miles and takes about 2h 4m, using a mix of highways and local roads.

Expect a mix of faster highway mileage and slower local approaches near the beginning or end.
There are about 23 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
Crain Highway is the longest continuous segment at about 21.1 miles.

How Hard Is This Drive?

This route mixes highway mileage with some local-road sections near the start or finish. This route has several spots where lane changes, forks, or exits need your full attention. The trickiest moment comes around 0.7 miles in near US 1 Business / Baltimore Pike.

Route Complexity 9/10

High effort - long or complex enough to need steady focus all day

This is a demanding drive. With 15 significant decision points across 86.3 miles, you will need to stay alert — especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.

Where does it get tricky?

The main spots that need attention: at 0.7 miles (US 1 Business / Baltimore Pike): Lane positioning matters here; at 6.4 miles: Exit ramp - move to the correct lane early. Lane positioning matters here; at 30.7 miles (Harbor Tunnel Throughway): Highway fork - watch signs carefully. Lane positioning matters here. Multiple destination signs - pick the right one.

Critical Maneuvers

5 of 15 key points

These are the spots where you need to pay the most attention. Preview them before you drive.

6
0.7 mi into trip | ~1m in | US 1 Business / Baltimore Pike

At end of road, turn right onto US 1 Business / Baltimore Pike

Lane positioning matters here

Use the none lane.
6
6.4 mi into trip | ~10m in

Take the exit toward I 95 South: Baltimore

Exit ramp - move to the correct lane early. Lane positioning matters here

Use the straight / slight right lanes. Toward I 95 South: Baltimore
9
30.7 mi into trip | ~42m in | Harbor Tunnel Throughway

Keep slight right at fork onto Harbor Tunnel Throughway toward Annapolis, Glen Burnie

Highway fork - watch signs carefully. Lane positioning matters here. Multiple destination signs - pick the right one

Use the straight / slight right lanes. Exit 6 Toward Annapolis, Glen Burnie
7
32.4 mi into trip | ~44m in

Keep slight right at fork toward I 97 South: Annapolis

Highway fork - watch signs carefully. Lane positioning matters here

Use the straight / slight right lanes. Toward I 97 South: Annapolis
8
42.3 mi into trip | ~56m in | MD 3

Keep slight right at fork onto MD 3 toward MD 32 West, MD 3 South: Bowie, Crofton

Highway fork - watch signs carefully. Lane positioning matters here. Multiple destination signs - pick the right one

Use the none lane. Toward MD 32 West, MD 3 South: Bowie, Crofton

Towns Along This Route

Between North Bel Air, MD and Bennsville, MD, road signs point toward Annapolis, Glen Burnie and Crofton.

Annapolis

30.7 mi in | ~42m | via Harbor Tunnel Throughway

Glen Burnie

30.7 mi in | ~42m | via Harbor Tunnel Throughway

Crofton

42.3 mi in | ~56m | via MD 3

Main Roads

Road Distance Duration
Crain Highway 21.1 mi 31m
MD 3 18.2 mi 26m
I 97 8.9 mi 10m
John F. Kennedy Memorial Highway 8.1 mi 9m
Express Toll Lanes 7.7 mi 9m
Harbor Tunnel Thruway 6 mi 8m
Vietnam Veterans Memorial Highway 5.2 mi 7m
Billingsley Road 4.4 mi 9m
Longest stretch: Crain Highway — 21.1 mi, about 31m

Turn-by-Turn Driving Directions

Step-by-step road directions between North Bel Air, MD and Bennsville, MD.

1

501 ft · 16 sec · MD 924
Use the none lane.
2

0.4 mi · 51 sec · US 1 Business; MD 924
3

0.2 mi · 23 sec · US 1 Business
Use the right lane.
4

0.5 mi · 1 min · US 1 Business
Use the none lane.
5

5.2 mi · 7 min · MD 24
Use the none lane.
6

0.6 mi · 1 min
Toward I 95 South: Baltimore Use the straight / slight right lanes.
7

8.1 mi · 9 min · I 95
Use the none / straight / slight right lanes.
8

6.5 mi · 7 min · Express Toll Lanes
Use the slight left lane.
9

1.2 mi · 1 min · Express Toll Lanes
Use the slight left lane.
10

3.8 mi · 5 min · I 895
Use the none lane.
11

1.4 mi · 2 min · I 895
12

2.2 mi · 3 min · I 895
Use the none / straight / slight right lanes.
13

0.5 mi · 39 sec · I 895
14

1.7 mi · 2 min · Harbor Tunnel Throughway
Exit 6 Toward Annapolis, Glen Burnie Use the straight / slight right lanes.
15

1.1 mi · 1 min
Toward I 97 South: Annapolis Use the straight / slight right lanes.
16

8.9 mi · 10 min · I 97
Use the none lane.
17

18 mi · 26 min · MD 3
Toward MD 32 West, MD 3 South: Bowie, Crofton Use the none lane.
18

21 mi · 31 min · US 301
Use the straight lane.
19

2.3 mi · 3 min · Billingsley Road
20

0.2 mi · 32 sec · Middletown Road
21

24 ft · 0 sec · Billingsley Road
22

2.1 mi · 5 min · Billingsley Road
23

Billingsley Road

Trip Plan

Morning Departure

Leave by 9 AM and you'll arrive before lunch.

Evening Departure

Even a 4 PM departure gets you there before dark in summer.

You can normally do this drive in one day.
You may only need one short stretch break if traffic stays light.
The halfway point lands around 43.2 miles from North Bel Air, MD, or about 57m into the drive.
The longest continuous stretch on this route runs about 21.1 miles.

This is a comfortable same-day trip.

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 80 miles or 1h 52m in

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 43.2 miles or 57m in

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Final hour starts around 1h 42m

Traffic, exits, and arrival timing usually matter more near Bennsville, MD than in the middle of the route.

Before You Leave

+

Open the route before leaving North Bel Air, MD so your first major turns are already loaded.

+

Leave with enough water and a charging cable within reach, not packed away.

+

Check your fuel range against the first long segment, especially if you are starting outside city service areas.

Day 1

Settle into the route from North Bel Air, MD

This is one driving day of about 86.3 miles and 2h 4m.

Your first comfortable stop window is around 80 miles from North Bel Air, MD.
This route can stay practical as a one-day drive if traffic stays reasonable.
You may only need one short stretch stop if conditions stay smooth.
The longest stretch is on Crain Highway for about 21.1 miles.

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 43.2 mi from North Bel Air, MD · 57m into the drive

Downtown Staten Island, NY, NY

Mid-route town

Meal stop

Staten Island, NY

43 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Pacing Suggestions

Staten Island, NY

Fuel and coffee

A short stop after about 80 miles helps settle the day before fatigue starts building.

Staten Island, NY

Meal break

The midpoint is around 43.2 miles from North Bel Air, MD, which is a good place for a longer meal and fuel stop.

Arriving in Bennsville, MD

The final approach into Bennsville, MD usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Bennsville, MD.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Regular Gas

$14.28 one way

$28.56 round trip

$4.20/gal 25.4 MPG avg 30 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.60 $15.63 $31.25
premium $4.92 $16.72 $33.45
diesel $5.64 $19.17 $38.35

Estimated Tolls: $0.42

Harbor Tunnel Thruway (6 mi) $0.42

Toll estimates based on average 2024-2025 rates. EZ-Pass/SunPass discounts may lower the actual cost.

Estimated Trip Cost (one way, 1 person)

Fuel

$14

Tolls

$0

Meals

$25–$50

Total

$40–$65

Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.

Estimated CO2 emission: 30.2 kg one way. Prices: EIA weekly data, 2026-04-06.

Driving Electric?

About $9 in charging · 0 stops · 67% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 25.9 0 $9.06 $4.14
Efficient EV 21.6 0 $7.55 $3.45
EV Truck/SUV 34.5 0 $12.08 $5.52

Gas CO2

30 kg

EV CO2

10 kg (67% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Local time and weather at both ends of the drive

Current conditions at both ends of the drive. If you're planning ahead, check the forecast closer to your travel date.

Forecast data refreshed 2 days ago

Origin

North Bel Air, MD

Afternoon in North Bel Air on Saturday

Local time

4:29 PM

EDT

Current temp

64°F

Forecast unavailable right now

EDT Live forecast

Destination

Bennsville, MD

Afternoon in Bennsville on Saturday

Local time

4:29 PM

EDT

Current temp

68°F

Forecast unavailable right now

EDT Live forecast

Along the Route

59°F

Staten Island, NY

43 mi in

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.

Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.

Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

4 degrees warmer at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

2h 4m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Frequently Asked Questions

The drive from North Bel Air, MD to Bennsville, MD covers 86.3 miles and takes about 2h 4m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are Crain Highway, MD 3, I 97. Expect a mix of highway and local road driving.
This is a comfortable same-day trip.
The midpoint is about 43.2 miles from North Bel Air, MD. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $14.28 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
This is a demanding drive. With 15 significant decision points across 86.3 miles, you will need to stay alert — especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.
The main spots that need attention: at 0.7 miles (US 1 Business / Baltimore Pike): Lane positioning matters here; at 6.4 miles: Exit ramp - move to the correct lane early. Lane positioning matters here; at 30.7 miles (Harbor Tunnel Throughway): Highway fork - watch signs carefully. Lane positioning matters here. Multiple destination signs - pick the right one.
Between North Bel Air, MD and Bennsville, MD, road signs point toward Annapolis, Glen Burnie and Crofton.

Was this route helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Explore more options from North Bel Air, MD or browse trips ending in Bennsville, MD.

Looking for more statewide routes? Browse MD road trips.

Explore maps for North Bel Air, MD or Bennsville, MD on MapSof.net.