Origin
Park City, UT
Late night in Park City on Saturday
Local time
4:08 AM
MDT
Current temp
37°F
Unavailable
Live forecast
Trip from Park City, UT to Millcreek, UT
Compiled and reviewed by the Trip.ovh planning team at COD Solutions Oy · Last reviewed Apr 18, 2026 · Editorial standards
Drive Time
37m
Distance
29.2 mi
47 km
Drive Score
6/10
Good drive
Same Day?
Yes, doable
Fuel Cost
$4
one way
EV Charging
Unknown
Best Time to Leave
4 AM
0h 34m
★
6 AM
0h 37m
8 AM
0h 43m
10 AM
0h 39m
12 PM
0h 39m
3 PM
0h 40m
5 PM
0h 43m
8 PM
0h 35m
Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.
Park City, UT
Rockwell branding agency
Millcreek, UT
Wikimedia Commons
Trip Overview
The drive from Park City, UT to Millcreek, UT covers 29.2 miles and takes about 37m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.
The route leans on 9th Street, Main Street, Deer Valley Drive for much of the mileage, and the overall profile is turn-heavy local drive. At current regular gas prices, budget about $4.48 one way before food or hotel costs.
Who Is This Route For?
Weekend Trip
Doable as a same-day drive at 37m. Total distance: 29.2 miles.
Family Friendly
Moderate complexity with 0 natural rest stops along the way.
Solo Traveler
37m drive, comfortable solo distance.
EV Driver
0 DC fast chargers along the route. Coverage: unknown.
First-Time Driver
Mostly highway driving (0%). Straightforward navigation.
Scenic Drive
Turn-heavy local drive route profile.
Drive Character
Expect a 37m drive with frequent turns across 29.2 miles of local and secondary roads.
This route has more turning and local-road decision points than a simple highway run.
There are about 13 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
9th Street is one of the defining roads on this drive.
How Hard Is This Drive?
Expect a hands-on drive with frequent turns and local roads rather than long highway stretches. Navigation is very simple - set it and forget it for most of the drive.
Driving Effort
1/10
Very easy - short and simple to drive
Balances navigation complexity with total wheel time.
The drive from Park City, UT to Millcreek, UT is easy. At 37m with 0% highway, most drivers will find it relaxed and low-stress.
Where does it get tricky?
This route does not have any notably tricky sections. Most of the drive from Park City, UT to Millcreek, UT is straightforward, with well-signed roads and simple exits.
Main Roads
| Road | Distance | Duration |
|---|---|---|
| 9th Street | — | — |
| Main Street | — | — |
| Deer Valley Drive | — | — |
| Park Avenue | — | — |
| Dwight D | — | — |
| SR 71 | — | — |
| 700 East | — | — |
| 3900 South | — | — |
Some road-level metrics are being recalculated.
Longest stretch:
9th Street
— detailed segment metrics are refreshing.
Turn-by-Turn Driving Directions
Step-by-step road directions between Park City, UT and Millcreek, UT.
1
Start on Park Avenue
0.2 mi
·
31 sec
·
Park Avenue
2
Turn right onto 9th Street
200 ft
·
11 sec
·
9th Street
3
Turn left onto Main Street
351 ft
·
21 sec
·
Main Street
4
Turn left onto Deer Valley Drive
0.8 mi
·
1 min
·
Deer Valley Drive
5
Turn right onto Park Avenue
3.2 mi
·
5 min
·
Park Avenue
6
Continue straight
2.6 mi
·
4 min
7
Take the exit slight left
0.4 mi
·
52 sec
8
Merge slight left onto Dwight D. Eisenhower Highway
19 mi
·
20 min
·
Dwight D. Eisenhower Highway
9
Take the exit slight right toward SR 71: 700 East
0.2 mi
·
32 sec
·
SR 71: 700 East
10
Keep slight left
135 ft
·
5 sec
11
Turn left onto 700 East
2.2 mi
·
4 min
·
700 East
12
Turn right onto 3900 South
0.2 mi
·
24 sec
·
3900 South
13
Arrive at your destination
Fuel & Cost
Regular Gas
$4.48 one way
$8.95 round trip
$3.89/gal
25.4 MPG avg
10 kg CO2
| Fuel Type | $/gal | One Way | Round Trip |
|---|---|---|---|
| midgrade | $4.23 | $4.86 | $9.73 |
| premium | $4.55 | $5.23 | $10.46 |
| diesel | $5.41 | $6.22 | $12.44 |
No toll roads detected on this route.
Drive Cost (one way)
Fuel
$4
Estimated CO2 emission: 10.2 kg one way.
Driving Electric?
About $3 in charging · 0 stops · 70% less CO2
| Vehicle Type | kWh | Stops | DC Fast | Home Charge |
|---|---|---|---|---|
| Average EV | 8.8 | 0 | $3.07 | $1.40 |
| Efficient EV | 7.3 | 0 | $2.55 | $1.17 |
| EV Truck/SUV | 11.7 | 0 | $4.09 | $1.87 |
Gas CO2
10 kg
EV CO2
3 kg (70% less)
This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.
DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.
Travel Intel
Current conditions at both ends of the drive.
Destination
Millcreek, UT
Late night in Millcreek on Saturday
Local time
4:08 AM
MDT
Current temp
47°F
Unavailable
Live forecast
Time zone
Same local time
Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.
Temperature spread
10 degrees warmer at arrival
A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.
Road read
37m on the road
Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.
Weather data from the National Weather Service. Conditions may change; check closer to your travel date.
Frequently Asked Questions
The drive from Park City, UT to Millcreek, UT covers 29.2 miles and takes about 37m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are 9th Street, Main Street, Deer Valley Drive. Expect a mix of highway and local road driving.
This is a comfortable same-day trip.
The midpoint is about 14.6 miles from Park City, UT. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $4.48 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
The drive from Park City, UT to Millcreek, UT is easy. At 37m with 0% highway, most drivers will find it relaxed and low-stress.
This route does not have any notably tricky sections. Most of the drive from Park City, UT to Millcreek, UT is straightforward, with well-signed roads and simple exits.
The route from Park City, UT to Millcreek, UT does not surface many named destination signs beyond the main corridor.
How this page is built
Compiled by the Trip.ovh planning team at COD Solutions Oy from open government datasets — OSRM over OpenStreetMap for geometry. See our methodology for refresh cadence and limitations.
Was this helpful?
Thanks for your feedback!
Your tip has been submitted. Thanks!
/500
Recent Tips
·
Explore More
Continue From Millcreek, UT
More trips to Millcreek, UT
Explore more options from Park City, UT or browse trips ending in Millcreek, UT.
Looking for more statewide routes? Browse UT road trips.