Skip to main content

Trip from Paulding, OH to Dayton, OH

Data updated 0 seconds ago

Drive Time

2h 23m

Distance

108.1 mi

174 km

Drive Score

8/10

Great drive

Same Day?

Yes, doable

Fuel Cost

$17

one way

EV Charging

Loading...

station data

Best Time to Leave

Save up to 29 min
4 AM
2h 14m ★
6 AM
2h 23m
8 AM
2h 43m
10 AM
2h 30m
12 PM
2h 28m
3 PM
2h 31m
5 PM
2h 42m
8 PM
2h 18m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

Downtown Paulding, OH, OH

Paulding, OH

Ezkol Arnak

Downtown Dayton, OH, OH

Dayton, OH

Wikimedia Commons

Trip Overview

Traveling from Paulding to Dayton covers 108.1 miles and typically takes about 2 hours and 23 minutes. Since this route is straightforward and sits entirely within the Midwest, it is perfectly suited for a comfortable one-day trip. You should budget approximately $16 for fuel to complete the journey. The drive relies heavily on US 127, SR 49, and East Perry Street, making it a highly efficient way to navigate across Ohio. Because the total duration is well under three hours, you won't need to worry about booking an overnight stay unless you have extra time to explore your destination. It is a practical, no-nonsense connection that gets you from point A to point B without any unnecessary complexity.

Trip Pace

Same-day drive is realistic

A same-day return is realistic if you keep stops short.

Break Rhythm

0 planned breaks

A short stop every 2 to 3 hours is enough for this drive.

Midpoint

54 miles from Paulding, OH

A natural place for your longest stop of the day , about 1h 11m into the drive .

Loading map...

Drive Character

Expect a highway-focused drive that keeps you moving steadily toward your destination. With 84% of your time spent on highways, you will encounter limited stop-and-go traffic compared to urban commuting routes. The longest uninterrupted portion of the trip spans 58.6 miles on US 127, providing a consistent pace for the bulk of your travel. While the road transitions through various stretches, the focus remains on maintaining momentum. You will find that the character of the drive is functional and direct, allowing you to settle into a rhythm behind the wheel without frequent road-type changes.

This route has more turning and local-road decision points than a simple highway run.
There are about 16 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
North Williams Street is one of the defining roads on this drive.

How Hard Is This Drive?

Expect a hands-on drive with frequent turns and local roads rather than long highway stretches. Navigation is very simple — set it and forget it for most of the drive.

Route Complexity 1/10

Very easy - short and simple to drive

The drive from Paulding, OH to Dayton, OH is easy. At 2h 23m with 0% highway, most drivers will find it relaxed and low-stress.

Where does it get tricky?

This route does not have any notably tricky sections. Most of the drive from Paulding, OH to Dayton, OH is straightforward, with well-signed roads and simple exits.

Main Roads

Road Distance Duration
North Williams Street Unavailable Refreshing
East Perry Street Unavailable Refreshing
the route Unavailable Refreshing
SR 49 South Unavailable Refreshing
West 1st Street Unavailable Refreshing
North Ludlow Street Unavailable Refreshing
West 3rd Street Unavailable Refreshing
South Main Street Unavailable Refreshing

Per-road distance and duration are being refreshed from OSRM for this route.

Longest stretch: North Williams Street — detailed segment metrics are refreshing.

Turn-by-Turn Driving Directions

Step-by-step road directions between Paulding, OH and Dayton, OH.

1

Start on East Jackson Street

66 ft · 7 sec · East Jackson Street
2

Turn left onto North Williams Street

341 ft · 12 sec · North Williams Street
3

Turn left onto East Perry Street

17 mi · 22 min · East Perry Street
4

Enter the roundabout and take exit 1 toward the route

13 ft · the route
5

Exit the roundabout

16 mi · 25 min
6

Continue straight

42 mi · 52 min
7

Take the exit slight right

0.2 mi · 41 sec
8

Turn left

22 mi · 24 min
9

Keep slight right to continue on SR 49 South: Clayton, Trotwood

10.0 mi · 14 min · SR 49 South: Clayton, Trotwood
10

Continue on West 1st Street

381 ft · 7 sec · West 1st Street
11

Continue on West 1st Street

36 ft · 1 sec · West 1st Street
12

Continue on West 1st Street

0.5 mi · 58 sec · West 1st Street
13

Turn right onto North Ludlow Street

0.2 mi · 27 sec · North Ludlow Street
14

Turn left onto West 3rd Street

515 ft · 13 sec · West 3rd Street
15

Turn right onto South Main Street

223 ft · 6 sec · South Main Street
16

Arrive at your destination

Trip Plan

Given the 2 hour and 23 minute duration, you have plenty of flexibility when choosing your departure time. Since there are zero formal stops scheduled along this 108.1-mile path, consider fueling up in Paulding before you head out to ensure you don't have to hunt for stations mid-trip. If you prefer a relaxed pace, leave mid-morning to avoid typical regional traffic patterns. Keep a close eye on the transition between US 127 and SR 49, as navigating these shifts efficiently is the key to keeping your travel time close to the estimates. Because the drive is relatively short, you can easily reach Dayton by lunchtime if you get on the road early.

Morning Departure

Leave by 9 AM and you'll arrive before lunch.

Evening Departure

Even a 4 PM departure gets you there before dark in summer.

You can normally do this drive in one day.
You may only need one short stretch break if traffic stays light.
The halfway point lands around 54 miles from Paulding, OH, or about 1h 11m into the drive.

This is a comfortable same-day trip.

Departure

Before you leave

Start with fuel, water, and navigation already sorted so the first hour feels easy.

First stop

Around 80 miles or 1h 46m in

Use this first pause for coffee, a restroom break, and a quick traffic check ahead.

Halfway reset

Around 54 miles or 1h 11m in

This is the best place for your longest stop, a real meal, and a full fuel check.

Final approach

Final hour starts around 1h 57m

Traffic, exits, and arrival timing usually matter more near Dayton, OH than in the middle of the route.

Before You Leave

+

Open the route before leaving Paulding, OH so your first major turns are already loaded.

+

Leave with enough water and a charging cable within reach, not packed away.

+

Check your fuel range against the first long segment, especially if you are starting outside city service areas.

Day 1

Settle into the route from Paulding, OH

This is one driving day of about 108.1 miles and 2h 23m.

Your first comfortable stop window is around 80 miles from Paulding, OH.
This route can stay practical as a one-day drive if traffic stays reasonable.
You may only need one short stretch stop if conditions stay smooth.

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 54 mi from Paulding, OH · 1h 11m into the drive

city in Montgomery and Greene counties, Ohio, United States

Mid-route town

Meal stop

Kettering, OH

54 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Pacing Suggestions

Kettering, OH

Fuel and coffee

A short stop after about 80 miles helps settle the day before fatigue starts building.

Kettering, OH

Meal break

The midpoint is around 54 miles from Paulding, OH, which is a good place for a longer meal and fuel stop.

Arriving in Dayton, OH

The final approach into Dayton, OH usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Dayton, OH.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Regular Gas

$16.78 one way

$33.55 round trip

$3.94/gal 25.4 MPG avg 38 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.38 $18.62 $37.24
premium $4.91 $20.89 $41.78
diesel $5.61 $23.87 $47.73

No toll roads detected on this route.

Estimated Trip Cost (one way, 1 person)

Fuel

$17

Meals

$25–$50

Total

$42–$67

Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.

Estimated CO2 emission: 37.8 kg one way. Prices: EIA weekly data, 2026-04-13.

Driving Electric?

About $11 in charging · 0 stops · 66% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 32.4 0 $11.35 $5.19
Efficient EV 27 0 $9.46 $4.32
EV Truck/SUV 43.2 0 $15.13 $6.92

Gas CO2

38 kg

EV CO2

13 kg (66% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast data refreshed 5 days ago

Origin

Paulding, OH

Morning in Paulding on Wednesday

Local time

8:08 AM

EDT

Current temp

75°F

Unavailable

Live forecast

Destination

Dayton, OH

Morning in Dayton on Wednesday

Local time

8:08 AM

EDT

Current temp

68°F

Unavailable

Live forecast

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.

Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.

Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

7 degrees cooler at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

2h 23m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Paulding, OH to Dayton, OH covers 108.1 miles and takes about 2h 23m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are North Williams Street, East Perry Street, the route. Expect a mix of highway and local road driving.
This is a comfortable same-day trip.
The midpoint is about 54 miles from Paulding, OH. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $16.78 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
The drive from Paulding, OH to Dayton, OH is easy. At 2h 23m with 0% highway, most drivers will find it relaxed and low-stress.
This route does not have any notably tricky sections. Most of the drive from Paulding, OH to Dayton, OH is straightforward, with well-signed roads and simple exits.
The route from Paulding, OH to Dayton, OH does not surface many named destination signs beyond the main corridor.

Was this route helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Explore more options from Paulding, OH or browse trips ending in Dayton, OH.

Looking for more statewide routes? Browse OH road trips.

Explore maps for Paulding, OH or Dayton, OH on MapSof.net.