Origin
Pearland, TX
Afternoon in Pearland on Sunday
Local time
3:29 PM
CDT
Current temp
70°F
Unavailable
Live forecast
Trip from Pearland, TX to Clute, TX
Drive Time
56m
Distance
44.5 mi
72 km
Drive Score
6/10
Good drive
Same Day?
Yes, doable
Fuel Cost
$7
one way
EV Charging
Loading...
station data
Best Time to Leave
4 AM
0h 52m
★
6 AM
0h 56m
8 AM
1h 5m
10 AM
0h 59m
12 PM
0h 58m
3 PM
1h 0m
5 PM
1h 5m
8 PM
0h 53m
Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.
Pearland, TX
Enric Cruz López
Clute, TX
Thomas balabaud
Trip Overview
If you are planning a quick getaway from Pearland to Clute, you can expect a manageable 44.5-mile journey that typically takes about 56 minutes. This route is perfectly suited for a single-day trip, allowing you to easily travel between these two Great Plains locations without needing an overnight stay. Budgeting about $7 for fuel makes this a highly economical excursion for your weekend plans. Since there are no mandatory stops required along the way, you have the flexibility to make the drive as fast or as leisurely as your schedule permits. It is a straightforward trip that avoids the complexity of long-haul travel, making it an ideal choice for a simple change of scenery.
Trip Pace
Same-day drive is realistic
A same-day return is realistic if you keep stops short.
Break Rhythm
0 planned breaks
A short stop every 2 to 3 hours is enough for this drive.
Midpoint
22.2 miles from Pearland, TX
A natural place for your longest stop of the day , about 28m into the drive .
Drive Character
Expect a turn-heavy local drive rather than a high-speed interstate cruise. You will spend your time navigating a mix of West Broadway Street, TX 288 South, and the South Freeway to reach your destination. Because the highway share is 0%, you should prepare for a more consistent, localized driving experience rather than long, uninterrupted stretches on a major thoroughfare. In fact, your longest stretch is 0 miles on West Broadway Street, meaning you will need to stay alert for frequent turns and road transitions. The route demands your full attention as you move through these local connections, so keep your hands on the wheel and your focus on the road ahead.
This route has more turning and local-road decision points than a simple highway run.
There are about 13 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
West Broadway Street is one of the defining roads on this drive.
How Hard Is This Drive?
Expect a hands-on drive with frequent turns and local roads rather than long highway stretches. Navigation is very simple — set it and forget it for most of the drive.
Route Complexity
1/10
Very easy - short and simple to drive
The drive from Pearland, TX to Clute, TX is easy. At 56m with 0% highway, most drivers will find it relaxed and low-stress.
Where does it get tricky?
This route does not have any notably tricky sections. Most of the drive from Pearland, TX to Clute, TX is straightforward, with well-signed roads and simple exits.
Main Roads
| Road | Distance | Duration |
|---|---|---|
| West Broadway Street | Unavailable | Refreshing |
| TX 288 South | Unavailable | Refreshing |
| South Freeway | Unavailable | Refreshing |
| Nolan Ryan Expressway | Unavailable | Refreshing |
| TX 35 | Unavailable | Refreshing |
| Front Street | Unavailable | Refreshing |
| South Velasco Street | Unavailable | Refreshing |
| Brazosport Boulevard North | Unavailable | Refreshing |
Per-road distance and duration are being refreshed from OSRM for this route.
Longest stretch:
West Broadway Street
— detailed segment metrics are refreshing.
Turn-by-Turn Driving Directions
Step-by-step road directions between Pearland, TX and Clute, TX.
1
Start on South Main Street
46 ft
·
8 sec
·
South Main Street
2
Turn left onto West Broadway Street
6.3 mi
·
9 min
·
West Broadway Street
3
Turn left onto TX 288 South
427 ft
·
9 sec
·
TX 288 South
4
Take the ramp straight toward TX 288 South
0.3 mi
·
37 sec
·
TX 288 South
5
Merge slight left onto South Freeway
2.7 mi
·
3 min
·
South Freeway
6
Continue on Nolan Ryan Expressway
25 mi
·
28 min
·
Nolan Ryan Expressway
7
Take the exit slight right toward TX 35
0.5 mi
·
1 min
·
TX 35
8
Turn left
1.2 mi
·
2 min
9
Turn right onto Front Street
0.6 mi
·
59 sec
·
Front Street
10
Turn straight onto South Velasco Street
3.3 mi
·
4 min
·
South Velasco Street
11
Continue on Brazosport Boulevard North
6.0 mi
·
9 min
·
Brazosport Boulevard North
12
Turn right onto East Main Street
0.2 mi
·
20 sec
·
East Main Street
13
Arrive at your destination
Trip Plan
Because this is a short, sub-one-hour drive, you have plenty of flexibility regarding your departure time. You won't need to worry about complex refueling strategies or rest stop planning, as the $7 fuel cost is minimal and the distance is quite brief. To make the most of your trip, try to avoid peak local traffic hours to ensure your 56-minute travel time stays consistent. Since the entire route consists of local roads and turns, familiarize yourself with your map before leaving to navigate the transitions between West Broadway Street and the South Freeway smoothly. Prioritize a comfortable start to your day, knowing that you can reach Clute quickly and without the exhaustion of a long-distance commute.
Morning Departure
Leave by 9 AM and you'll arrive before lunch.
Evening Departure
Even a 4 PM departure gets you there before dark in summer.
You can normally do this drive in one day.
You may only need one short stretch break if traffic stays light.
The halfway point lands around 22.2 miles from Pearland, TX, or about 28m into the drive.
This is a comfortable same-day trip.
Departure
Before you leave
Start with fuel, water, and navigation already sorted so the first hour feels easy.
First stop
Around 44.5 miles or 56m in
Use this first pause for coffee, a restroom break, and a quick traffic check ahead.
Halfway reset
Around 22.2 miles or 28m in
This is the best place for your longest stop, a real meal, and a full fuel check.
Final approach
Final hour starts around 47m
Traffic, exits, and arrival timing usually matter more near Clute, TX than in the middle of the route.
Before You Leave
+
Open the route before leaving Pearland, TX so your first major turns are already loaded.
+
Leave with enough water and a charging cable within reach, not packed away.
+
Check your fuel range against the first long segment, especially if you are starting outside city service areas.
Day 1
Settle into the route from Pearland, TX
This is one driving day of about 44.5 miles and 56m.
Your first comfortable stop window is around 80 miles from Pearland, TX.
This route can stay practical as a one-day drive if traffic stays reasonable.
You may only need one short stretch stop if conditions stay smooth.
Where to Stop
Rest stops, refuel points, and overnight suggestions along this route.
Halfway Point
Midpoint
About 22.2 mi from Pearland, TX · 28m into the drive
Mid-route town
Meal stop
22 mi into the route
Best for: Lunch, fuel, and a longer reset
This sits close to the middle of the route, so it works well for the longest stop of the day.
Pacing Suggestions
Fuel and coffee
A short stop after about 44.5 miles helps settle the day before fatigue starts building.
Meal break
The midpoint is around 22.2 miles from Pearland, TX, which is a good place for a longer meal and fuel stop.
Arriving in Clute, TX
The final approach into Clute, TX usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.
Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Clute, TX.
These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.
Fuel & Cost
Regular Gas
$6.80 one way
$13.60 round trip
$3.88/gal
25.4 MPG avg
16 kg CO2
| Fuel Type | $/gal | One Way | Round Trip |
|---|---|---|---|
| midgrade | $4.25 | $7.45 | $14.90 |
| premium | $4.59 | $8.04 | $16.09 |
| diesel | $5.64 | $9.89 | $19.77 |
No toll roads detected on this route.
Estimated Trip Cost (one way, 1 person)
Fuel
$7
Meals
$25–$50
Total
$32–$57
Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.
Estimated CO2 emission: 15.6 kg one way. Prices: EIA weekly data, 2026-04-06.
Driving Electric?
About $5 in charging · 0 stops · 69% less CO2
| Vehicle Type | kWh | Stops | DC Fast | Home Charge |
|---|---|---|---|---|
| Average EV | 13.4 | 0 | $4.67 | $2.14 |
| Efficient EV | 11.1 | 0 | $3.89 | $1.78 |
| EV Truck/SUV | 17.8 | 0 | $6.23 | $2.85 |
Gas CO2
16 kg
EV CO2
5 kg (69% less)
This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.
DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.
Travel Intel
Current conditions at both ends of the drive.
Destination
Clute, TX
Afternoon in Clute on Sunday
Local time
3:29 PM
CDT
Current temp
70°F
Unavailable
Live forecast
Seasonal Notes
Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.
Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.
Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.
Time zone
Same local time
Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.
Temperature spread
Very similar conditions
Both ends of the route are sitting at about the same temperature right now.
Road read
56m on the road
Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.
Weather data from the National Weather Service. Conditions may change; check closer to your travel date.
Frequently Asked Questions
The drive from Pearland, TX to Clute, TX covers 44.5 miles and takes about 56m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are West Broadway Street, TX 288 South, South Freeway. Expect a mix of highway and local road driving.
This is a comfortable same-day trip.
The midpoint is about 22.2 miles from Pearland, TX. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $6.80 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
The drive from Pearland, TX to Clute, TX is easy. At 56m with 0% highway, most drivers will find it relaxed and low-stress.
This route does not have any notably tricky sections. Most of the drive from Pearland, TX to Clute, TX is straightforward, with well-signed roads and simple exits.
The route from Pearland, TX to Clute, TX does not surface many named destination signs beyond the main corridor.
Was this route helpful?
Thanks for your feedback!
Your tip has been submitted. Thanks!
/500
Recent Tips
·
Explore More
Continue From Clute, TX
Explore more options from Pearland, TX or browse trips ending in Clute, TX.
Looking for more statewide routes? Browse TX road trips.
Explore maps for Pearland, TX or Clute, TX on MapSof.net.