Skip to main content

Trip from Plainview, NY to Brooklyn, NY

Last recalculated Apr 16, 2026

Drive Time

47m

Distance

32.6 mi

52 km

Drive Score

7/10

Good drive

Same Day?

Yes, doable

Fuel Cost

$5

one way

EV Charging

None

Best Time to Leave

Save up to 11 min
4 AM
0h 44m ★
6 AM
0h 48m
8 AM
0h 55m
10 AM
0h 50m
12 PM
0h 49m
3 PM
0h 51m
5 PM
0h 55m
8 PM
0h 45m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

census-designated place in Eastern Nassau County, New York, United States

Plainview, NY

Wikimedia Commons

borough of New York City, New York, United States

Brooklyn, NY

Wikimedia Commons

Trip Overview

Traveling from Plainview, NY to Brooklyn, NY covers a relatively short distance of 32.6 miles. You can expect the journey to take approximately 1 hour and 7 minutes, making it a perfect candidate for a single-day trip. With a fuel cost estimate of just $5, this route is highly economical for travelers moving within the Northeast region. Because the trip is short, you do not need to worry about overnight logistics or complex planning. It serves as a straightforward connection between Long Island and the city, ideal for those who prefer quick transitions rather than long-haul travel.

Who Is This Route For?

Weekend Trip

Doable as a same-day drive at 47m. Total distance: 32.6 miles.

Family Friendly

Moderate complexity with 0 natural rest stops along the way.

Solo Traveler

47m drive, comfortable solo distance.

EV Driver

0 DC fast chargers along the route. Coverage: none.

First-Time Driver

Mostly highway driving (76%). Some complex stretches to watch for.

Drive Character

Expect a turn-heavy local drive that requires your full attention as you navigate away from the suburbs. You will primarily utilize Old Country Road, NY 135 South, and the Seaford-Oyster Bay Expressway to make your way toward your destination. Since this route features a 0% highway share, you will be navigating surface streets rather than cruising on high-speed interstates. This creates a more technical driving experience where you will encounter frequent shifts in traffic flow and direction. Be prepared for a hands-on trip that demands constant engagement with local signage and intersection management.

Most of the miles stay on highways, which makes pacing and fuel planning easier than turn-by-turn city driving.
There are about 16 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
Southern State Parkway is the longest continuous segment at about 13.3 miles.

Elevation Profile

Mostly flat terrain

148 ft 10 ft

Total Climb

63 ft

Total Descent

163 ft

Highest Point

148 ft

Elevation Range

138 ft

How Hard Is This Drive?

This is a straightforward highway drive that stays mostly on Southern State Parkway and Belt Parkway. This route has several spots where lane changes, forks, or exits need your full attention. The trickiest moment comes around 0.8 miles in.

Driving Effort 9/10

High effort - long or complex enough to need steady focus all day

Balances navigation complexity with total wheel time.

This is a demanding drive. With 11 significant decision points across 32.6 miles, you will need to stay alert — especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.

Where does it get tricky?

The main spots that need attention: at 0.8 miles: Lane positioning matters here; at 5.9 miles: Exit ramp - move to the correct lane early. Lane positioning matters here; at 20.8 miles (BP / Belt Parkway): Highway fork - watch signs carefully. Lane positioning matters here.

Critical Maneuvers

5 of 11 key points

These are the spots where you need to pay the most attention. Preview them before you drive.

7
0.8 mi into trip | ~1m in

Take the ramp toward NY 135 South: Seaford

Lane positioning matters here

Use the left lane. Toward NY 135 South: Seaford
7
5.9 mi into trip | ~7m in

Take the exit toward SO West: New York

Exit ramp - move to the correct lane early. Lane positioning matters here

Use the slight right lane. Exit 4W Toward SO West: New York
6
20.8 mi into trip | ~27m in | BP / Belt Parkway

Keep slight right at fork onto BP / Belt Parkway

Highway fork - watch signs carefully. Lane positioning matters here

Use the slight right lane.
6
23.2 mi into trip | ~30m in | BP / Belt Parkway

Keep slight left at fork onto BP / Belt Parkway

Highway fork - watch signs carefully. Lane positioning matters here

Use the straight / slight right lanes.
7
26.1 mi into trip | ~35m in

Take the exit toward North Conduit Avenue

Exit ramp - move to the correct lane early. Lane positioning matters here

Use the straight / slight right lanes. Exit 17W Toward North Conduit Avenue

Towns Mentioned on Route Signs

Based on OSRM destination-sign hints, not a full list of every settlement the road passes.

On the drive from Plainview, NY to Brooklyn, NY, road signs begin pointing toward So West: New York along the way.

So West: New York

5.9 mi in | ~7m

Main Roads

Road Distance Duration
Southern State Parkway 13.3 mi 17m
Belt Parkway 6.5 mi 9m
Seaford-Oyster Bay Expressway 4.9 mi 5m
Linden Boulevard 3.8 mi 6m
Church Avenue 1.7 mi 4m
Old Country Road 0.8 mi 1m
North Conduit Avenue 0.6 mi 1m
Nostrand Avenue <0.1 mi <1m
Longest stretch: Southern State Parkway — 13.3 mi, about 17m

Turn-by-Turn Driving Directions

Step-by-step road directions between Plainview, NY and Brooklyn, NY.

1

Start on this road

73 ft · 3 sec · this road
2

Turn straight onto Old Country Road

0.8 mi · 1 min · Old Country Road
3

Take the ramp

0.2 mi · 28 sec
Toward NY 135 South: Seaford Use the left lane.
4

Merge onto NY 135

4.9 mi · 5 min · Seaford-Oyster Bay Expressway
Use the straight / slight right lanes.
5

Take the exit

0.3 mi · 40 sec
Exit 4W Toward SO West: New York Use the slight right lane.
6

Merge onto SO

13 mi · 17 min · Southern State Parkway
Use the straight / right lanes.
7

Continue on BP

1.3 mi · 1 min · Belt Parkway
8

Keep slight right at fork onto BP

2.4 mi · 3 min · Belt Parkway
Use the slight right lane.
9

Keep slight left at fork onto BP

2.9 mi · 4 min · Belt Parkway
Use the straight / slight right lanes.
10

Take the exit

0.3 mi · 32 sec
Exit 17W Toward North Conduit Avenue Use the straight / slight right lanes.
11

Merge onto NY 27

0.6 mi · 1 min · North Conduit Avenue
12

Turn straight onto NY 27

2.8 mi · 4 min · Linden Boulevard
Use the straight lane.
13

Continue on NY 27

1.0 mi · 1 min · Linden Boulevard
14

Turn slight left onto Church Avenue

1.7 mi · 4 min · Church Avenue
Use the left lane.
15

Turn left onto Nostrand Avenue

257 ft · 8 sec · Nostrand Avenue
16

Arrive at destination

Nostrand Avenue

Where to Stop

Rest stops, refuel points, and overnight suggestions along this route.

Halfway Point

Midpoint

About 16.3 mi from Plainview, NY · 21m into the drive

Mid-route town

Meal stop

Hempstead, NY

16 mi into the route

Best for: Lunch, fuel, and a longer reset

This sits close to the middle of the route, so it works well for the longest stop of the day.

Pacing Suggestions

East Flatbush, NY

Fuel and coffee

A short stop after about 32.6 miles helps settle the day before fatigue starts building.

Hempstead, NY

Meal break

The midpoint is around 16.3 miles from Plainview, NY, which is a good place for a longer meal and fuel stop.

Arriving in Brooklyn, NY

The final approach into Brooklyn, NY usually feels slower than the middle of the drive, so avoid planning your tightest schedule at the very end.

Try to arrive with enough fuel left to skip an immediate station stop unless you already know the area around Brooklyn, NY.

These stop ideas are pacing suggestions — the exact town or exit can change with traffic, hotel plans, and fuel range.

Fuel & Cost

Regular Gas

$5.31 one way

$10.61 round trip

$4.14/gal 25.4 MPG avg 11 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.48 $5.75 $11.50
premium $4.88 $6.27 $12.53
diesel $5.64 $7.24 $14.49

No toll roads detected on this route.

Drive Cost (one way)

Fuel

$5

Estimated CO2 emission: 11.4 kg one way. Prices: EIA weekly data, 2026-04-06.

Driving Electric?

About $3 in charging · 0 stops · 64% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 9.8 0 $3.42 $1.56
Efficient EV 8.2 0 $2.85 $1.30
EV Truck/SUV 13 0 $4.56 $2.09

Gas CO2

11 kg

EV CO2

4 kg (64% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast as of Apr 14, 2026

Origin

Plainview, NY

Evening in Plainview on Thursday

Local time

7:23 PM

EDT

Current temp

45°F

Unavailable

Live forecast

Destination

Brooklyn, NY

Evening in Brooklyn on Thursday

Local time

7:23 PM

EDT

Current temp

60°F

Partly Cloudy

W 6 mph 4% chance Live forecast

Flood Warning

Flood Warning issued April 13 at 11:13PM EDT until April 16 at 2:00PM EDT by NWS Binghamton NY

Seasonal Notes

Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.

Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.

Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

15 degrees warmer at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

47m on the road

The weather snapshot is not static. If you are leaving later, give both cities one more quick forecast check before departure.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Plainview, NY to Brooklyn, NY covers 32.6 miles and takes about 47m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.
The main roads are Southern State Parkway, Belt Parkway, Seaford-Oyster Bay Expressway. Most of the drive stays on highways, so watch for ramps and exits.
This is a comfortable same-day trip.
The midpoint is about 16.3 miles from Plainview, NY. Look for rest areas, gas stations, or food options near the halfway mark.
At current regular gas prices, expect to spend about $5.31 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.
Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.
This is a demanding drive. With 11 significant decision points across 32.6 miles, you will need to stay alert — especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.
The main spots that need attention: at 0.8 miles: Lane positioning matters here; at 5.9 miles: Exit ramp - move to the correct lane early. Lane positioning matters here; at 20.8 miles (BP / Belt Parkway): Highway fork - watch signs carefully. Lane positioning matters here.
On the drive from Plainview, NY to Brooklyn, NY, road signs begin pointing toward So West: New York along the way.

Was this helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Return Trip

Brooklyn, NY to Plainview, NY

Plan the drive back the other way.

33.1 mi 50m

Explore more options from Plainview, NY or browse trips ending in Brooklyn, NY.

Looking for more statewide routes? Browse NY road trips.

Explore maps for Plainview, NY or Brooklyn, NY on MapSof.net.