Skip to main content

Trip from Raleigh, NC to Wilsons Mills, NC

Compiled and reviewed by the Trip.ovh planning team at COD Solutions Oy · Last reviewed Apr 18, 2026 · Editorial standards

Drive Time

33m

Distance

26.1 mi

42 km

Drive Score

6/10

Good drive

Same Day?

Yes, doable

Fuel Cost

$4

one way

EV Charging

Unknown

Best Time to Leave

Save up to 9 min
4 AM
0h 30m ★
6 AM
0h 33m
8 AM
0h 39m
10 AM
0h 35m
12 PM
0h 35m
3 PM
0h 35m
5 PM
0h 38m
8 PM
0h 31m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

city in and state capital of North Carolina, United States of America

Raleigh, NC

Wikimedia Commons

Downtown Wilsons Mills, NC, NC

Wilsons Mills, NC

Mark Stebnicki

Trip Overview

The drive from Raleigh, NC to Wilsons Mills, NC covers 26.1 miles and takes about 33m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.

The route leans on South Blount Street, Hammond Road, Thomas Bradshaw Freeway for much of the mileage, and the overall profile is turn-heavy local drive. At current regular gas prices, budget about $4.08 one way before food or hotel costs.

Who Is This Route For?

Weekend Trip

Doable as a same-day drive at 33m. Total distance: 26.1 miles.

Family Friendly

Moderate complexity with 0 natural rest stops along the way.

Solo Traveler

33m drive, comfortable solo distance.

EV Driver

0 DC fast chargers along the route. Coverage: unknown.

First-Time Driver

Mostly highway driving (0%). Straightforward navigation.

Scenic Drive

Turn-heavy local drive route profile.

Drive Character

Expect a 33m drive with frequent turns across 26.1 miles of local and secondary roads.

This route has more turning and local-road decision points than a simple highway run.
There are about 13 navigation steps in the underlying route data, so the final approach matters more than the middle miles.
South Blount Street is one of the defining roads on this drive.

How Hard Is This Drive?

Expect a hands-on drive with frequent turns and local roads rather than long highway stretches. Navigation is very simple - set it and forget it for most of the drive.

Driving Effort 1/10

Very easy - short and simple to drive

Balances navigation complexity with total wheel time.

The drive from Raleigh, NC to Wilsons Mills, NC is easy. At 33m with 0% highway, most drivers will find it relaxed and low-stress.

Where does it get tricky?

This route does not have any notably tricky sections. Most of the drive from Raleigh, NC to Wilsons Mills, NC is straightforward, with well-signed roads and simple exits.

Main Roads

Road Distance Duration
South Blount Street
Hammond Road
Thomas Bradshaw Freeway
Clayton Bypass Scenic Byway
Swift Creek Road
Wilson's Mills Road
Fire Department Road

Some road-level metrics are being recalculated.

Longest stretch: South Blount Street — detailed segment metrics are refreshing.

Turn-by-Turn Driving Directions

Step-by-step road directions between Raleigh, NC and Wilsons Mills, NC.

1

Start on East South Street

505 ft · 21 sec · East South Street
2

Turn right onto South Blount Street

0.6 mi · 1 min · South Blount Street
3

Continue on Hammond Road

0.7 mi · 1 min · Hammond Road
4

Take the ramp slight right

0.2 mi · 31 sec
5

Merge slight left onto Thomas Bradshaw Freeway

2.2 mi · 2 min · Thomas Bradshaw Freeway
6

Keep slight right to continue on Thomas Bradshaw Freeway

8.1 mi · 9 min · Thomas Bradshaw Freeway
7

Keep slight right to continue on Clayton Bypass Scenic Byway

10 mi · 11 min · Clayton Bypass Scenic Byway
8

Continue straight

2.7 mi · 3 min
9

Take the exit slight right

0.4 mi · 1 min
10

Turn slight left onto Swift Creek Road

0.5 mi · 1 min · Swift Creek Road
11

Turn right onto Wilson's Mills Road

0.2 mi · 24 sec · Wilson's Mills Road
12

Turn left onto Fire Department Road

0.2 mi · 23 sec · Fire Department Road
13

Arrive at your destination

Fuel & Cost

Regular Gas

$4.08 one way

$8.16 round trip

$3.97/gal 25.4 MPG avg 9 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.34 $4.46 $8.93
premium $4.70 $4.83 $9.66
diesel $5.61 $5.76 $11.53

No toll roads detected on this route.

Drive Cost (one way)

Fuel

$4

Estimated CO2 emission: 9.1 kg one way. Prices: EIA weekly data, 2026-04-13.

Driving Electric?

About $3 in charging · 0 stops · 67% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 7.8 0 $2.74 $1.25
Efficient EV 6.5 0 $2.28 $1.04
EV Truck/SUV 10.4 0 $3.65 $1.67

Gas CO2

9 kg

EV CO2

3 kg (67% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast as of Apr 15, 2026

Origin

Raleigh, NC

Afternoon in Raleigh on Saturday

Local time

12:23 PM

EDT

Current temp

51°F

Unavailable

Live forecast

Destination

Wilsons Mills, NC

Afternoon in Wilsons Mills on Saturday

Local time

12:23 PM

EDT

Current temp

49°F

Unavailable

Live forecast

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

2 degrees cooler at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

33m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

Frequently Asked Questions

The drive from Raleigh, NC to Wilsons Mills, NC covers 26.1 miles and takes about 33m without stops. Add 15-30 minutes for a fuel or rest stop on longer drives.

The main roads are South Blount Street, Hammond Road, Thomas Bradshaw Freeway. Expect a mix of highway and local road driving.

This is a comfortable same-day trip.

The midpoint is about 13.1 miles from Raleigh, NC. Look for rest areas, gas stations, or food options near the halfway mark.

At current regular gas prices, expect to spend about $4.08 one way. This estimate uses 25.4 MPG — your actual cost will vary with your vehicle's fuel efficiency and current gas prices.

Leave by 9 AM and you'll arrive before lunch. Even a 4 PM departure gets you there before dark in summer.

The drive from Raleigh, NC to Wilsons Mills, NC is easy. At 33m with 0% highway, most drivers will find it relaxed and low-stress.

This route does not have any notably tricky sections. Most of the drive from Raleigh, NC to Wilsons Mills, NC is straightforward, with well-signed roads and simple exits.

The route from Raleigh, NC to Wilsons Mills, NC does not surface many named destination signs beyond the main corridor.

How this page is built

Compiled by the Trip.ovh planning team at COD Solutions Oy from open government datasets — OSRM over OpenStreetMap for geometry, and EIA for fuel prices. See our methodology for refresh cadence and limitations.

Was this helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

More trips to Wilsons Mills, NC

Explore more options from Raleigh, NC or browse trips ending in Wilsons Mills, NC.

Looking for more statewide routes? Browse NC road trips.